rp-ml-1999
By Date

Most recent messages
4666 messages sorted by: [ author ] [ thread ] [ subject ] [ attachment ]

Starting: Mon Jan 04 1999 - 09:06:23 EET
Ending: Fri Dec 31 1999 - 19:51:14 EET

Re: 3D Laser Digitizer(Scanner) for mold inspection Alain BERNARD (Mon Jan 04 1999 - 10:30:47 EET)
RE: Use greyscale value of image as heightfield for simple 3D Murphy, Matt (Mon Jan 04 1999 - 11:40:18 EET)
Re: 5220 at high powers David.Oblak@coulter.com (Mon Jan 04 1999 - 16:02:10 EET)
read and be warned..... Elaine Hunt (Mon Jan 04 1999 - 17:07:42 EET)
RE: Use grayscale value of image as heightfield for simple 3D J & C (Mon Jan 04 1999 - 20:07:23 EET)
Re: Use grayscale value of image as heightfield for simple 3D michael rees (Mon Jan 04 1999 - 18:39:37 EET)
RE: Use greyscale value of image as heightfield for simple 3D Tony McKenzie (Mon Jan 04 1999 - 20:31:39 EET)
Re: Use grayscale value of image as heightfield for simple 3D forge (Mon Jan 04 1999 - 21:15:19 EET)
FDM Online Discussion Group Matthew C. James (Mon Jan 04 1999 - 23:40:40 EET)
Re: 3D Laser Digitizer(Scanner) for mold inspection MIN CHANG-SHIK (Tue Jan 05 1999 - 00:38:10 EET)
off topic : humour : Genisis...in rp terms... Innomation Systems & Technologies Pte. Ltd., (Tue Jan 05 1999 - 11:02:49 EET)
Who sells and supports LOM in Italy? Ken The Racer (Tue Jan 05 1999 - 04:35:04 EET)
off topic : humour : Genisis...in rp terms... Monica & Glenn Whiteside (Tue Jan 05 1999 - 04:58:34 EET)
RE: off topic : humour : Genisis...in rp terms... Du Zhaohui (Dr) (Tue Jan 05 1999 - 06:07:27 EET)
Re: SIGGRAPH99 michael rees (Mon Jan 04 1999 - 23:32:48 EET)
Re: Surface finishing of mold insert built by Rapid Tooling DanF@aol.com (Tue Jan 05 1999 - 11:08:02 EET)
Re: RP EDM electrodes DanF@aol.com (Tue Jan 05 1999 - 11:15:38 EET)
RE: Use greyscale value of image as heightfield for simple 3D Tony McKenzie (Tue Jan 05 1999 - 11:31:24 EET)
RE: 3D Laser Digitizer(Scanner) for mold inspection Bauer Juergen (Tue Jan 05 1999 - 11:55:31 EET)
Re: Who sells and supports LOM in Italy? Yakov Horenstein (Tue Jan 05 1999 - 09:38:34 EET)
point cloud of a sculpture CHRISTINE SCHOENE (Tue Jan 05 1999 - 19:45:41 EET)
off topic : humour : Genisis...in rp terms... microtec (Tue Jan 05 1999 - 13:57:44 EET)
RE:point cloud of a sculpture CHRISTINE SCHOENE (Tue Jan 05 1999 - 20:51:30 EET)
Re: point cloud of a sculpture PROFORM AG (Tue Jan 05 1999 - 15:17:23 EET)
Looking for Stewart Garner Reed Williams, MD (Tue Jan 05 1999 - 18:38:02 EET)
FW: SIGGRAPH99 Dr Anshuman Razdan (Tue Jan 05 1999 - 19:26:04 EET)
Optoform Promau - Paolo Colombo (Tue Jan 05 1999 - 19:37:11 EET)
ENHANCED CAPABILITIES OF LIPTOOL (TM) RAPID TOOLING SYSTEM Nick Osborn (Tue Jan 05 1999 - 20:05:58 EET)
UCLA short course on "Inventing, Patenting, and Licensing" Goodin, Bill (Tue Jan 05 1999 - 20:15:20 EET)
IGES BREP Dr Anshuman Razdan (Tue Jan 05 1999 - 20:56:52 EET)
Sculptures michael rees (Tue Jan 05 1999 - 22:18:57 EET)
surfaces with Pro/E A. Langmaack (Tue Jan 05 1999 - 23:07:34 EET)
Re: Sculptures michael rees (Wed Jan 06 1999 - 00:03:44 EET)
Re: Sculptures jim leuba (Wed Jan 06 1999 - 00:53:36 EET)
LIPTOOL Steve Hengsperger (Wed Jan 06 1999 - 01:01:36 EET)
Re: off topic : humour : Genisis...in rp terms... Monica & Glenn Whiteside (Wed Jan 06 1999 - 02:06:57 EET)
Re: Surface finishing of mold insert built by Rapid Tooling Tom Richards (Wed Jan 06 1999 - 04:42:32 EET)
Re: LIPTOOL MIN CHANG-SHIK (Wed Jan 06 1999 - 03:49:01 EET)
Re: Here's my feedback on your RT statement (RP-ML) MIN CHANG-SHIK (Wed Jan 06 1999 - 04:44:46 EET)
Fw: read and be warned..... Innomation Systems & Technologies Pte. Ltd., (Wed Jan 06 1999 - 16:31:18 EET)
Fw: Reverse FEA : for Singaporeans in rememberance of the SilkAir Crash in Palembang Indonesia.... Innomation Systems & Technologies Pte. Ltd., (Wed Jan 06 1999 - 16:38:06 EET)
point cloud of a sculpture CHRISTINE SCHOENE (Wed Jan 06 1999 - 17:24:28 EET)
Re: need help with rapid tooling Peter Martin (Wed Jan 06 1999 - 11:50:33 EET)
RE: need help with rapid tooling Prof P. M. Dickens (Wed Jan 06 1999 - 21:07:00 EET)
Re: read and be warned.....HELP!!!! Steve Butler (Wed Jan 06 1999 - 14:39:41 EET)
surfaces with Pro/E A. Langmaack (Wed Jan 06 1999 - 15:15:34 EET)
sla test parts Chris Sutcliffe (Wed Jan 06 1999 - 15:23:25 EET)
SLA 5220 at high powers Chris Sutcliffe (Wed Jan 06 1999 - 15:30:29 EET)
What is the Florida JOB market like? Jedi Master Elliott (Wed Jan 06 1999 - 16:24:26 EET)
FLORIDA JOB MARKET Jedi Master Elliott (Wed Jan 06 1999 - 16:59:16 EET)
(no subject) Jedi Master Elliott (Wed Jan 06 1999 - 16:58:51 EET)
RE: will pattison (Wed Jan 06 1999 - 17:32:20 EET)
Re: Here's my feedback on your RT statement (RP-ML) DanF@aol.com (Wed Jan 06 1999 - 18:44:13 EET)
what technology did they buy? Elaine Hunt (Wed Jan 06 1999 - 19:09:57 EET)
Re: point cloud of a sculpture michael rees (Wed Jan 06 1999 - 19:28:59 EET)
need help-EDM Electrodes Artur Mateus (Sun Mar 01 1998 - 20:49:59 EET)
Testmodel Nemeth Karoly MEE (Wed Jan 06 1999 - 12:11:25 EET)
Hair STL Model MED (Thu Jan 07 1999 - 02:53:54 EET)
Re: point cloud of a sculpture Dr Duncan B. Gilmore (Thu Jan 07 1999 - 05:00:59 EET)
Re: Testmodel Douglas A. VanPutte (Thu Jan 07 1999 - 05:07:14 EET)
RP mailing list TAN CHOR ANN, RP (Thu Jan 07 1999 - 05:32:04 EET)
Cibatool SL 5530HT Resin Monica & Glenn Whiteside (Thu Jan 07 1999 - 06:07:22 EET)
Re: Mechanical Desktop 3 Shreyas J Bakshi (Thu Jan 07 1999 - 07:54:27 EET)
Re: Hair STL Model james mason (Thu Dec 10 1998 - 11:09:46 EET)
Re: Mechanical Desktop 3 james mason (Thu Dec 10 1998 - 11:13:24 EET)
Fwd: Testmodel Elaine Hunt (Thu Jan 07 1999 - 14:46:15 EET)
3D Systems Cross-License Agreement in Japan Yakov Horenstein (Thu Jan 07 1999 - 10:36:57 EET)
Jean RipPer's Y2k Prognostications for RP&M Elaine Hunt (Thu Jan 07 1999 - 16:34:22 EET)
EDM Electrodes Brent Stucker (Thu Jan 07 1999 - 19:22:36 EET)
Re: Jean RipPer's Y2k Prognostications for RP&M Marshall Burns (Thu Jan 07 1999 - 21:07:46 EET)
Re: Jean RipPer's Y2k Prognostications for RP&M Marshall Burns (Thu Jan 07 1999 - 21:31:44 EET)
RE: point cloud of a sculpture Dr Anshuman Razdan (Thu Jan 07 1999 - 21:53:47 EET)
Ply 2 STL on a pc Dr Anshuman Razdan (Thu Jan 07 1999 - 22:33:36 EET)
What happened to Plynetics Express? Brian Bauman (Fri Jan 08 1999 - 01:15:06 EET)
Re: EDM Electrodes jim@paramountind.com (Fri Jan 08 1999 - 03:04:57 EET)
New Years Greetings Mnr. D de Beer (Fri Jan 08 1999 - 13:49:00 EET)
Catia Solids PEDRO SANTOS (Fri Jan 08 1999 - 20:50:01 EET)
Re: Catia Solids Monica & Glenn Whiteside (Sat Jan 09 1999 - 23:17:15 EET)
RE: What happened to Plynetics Express? Monica & Glenn Whiteside (Sat Jan 09 1999 - 23:47:29 EET)
Wrong! Bruce (Sun Jan 10 1999 - 00:53:53 EET)
RE: Catia Monica & Glenn Whiteside (Sun Jan 10 1999 - 00:58:31 EET)
FW: Ply 2 STL on the PC Dr Anshuman Razdan (Sun Jan 10 1999 - 01:30:15 EET)
Sanders Dr Anshuman Razdan (Sun Jan 10 1999 - 02:10:58 EET)
Nice ad? Tacky ad? RE: What happened to Plynetics Express? B. J. Arnold-Feret (Sun Jan 10 1999 - 21:45:09 EET)
ply2stl Dr Anshuman Razdan (Mon Jan 11 1999 - 03:34:06 EET)
test STUART BROWN (Mon Jan 11 1999 - 15:29:40 EET)
epoxy properties STUART BROWN (Mon Jan 11 1999 - 17:58:47 EET)
3D Rabbit model jasonw (Mon Jan 11 1999 - 17:10:36 EET)
Re: epoxy properties Rafael Santillan (Mon Jan 11 1999 - 18:43:37 EET)
Actua part cleanup, sanding, repair Scott -Scooter- Sutterer (Mon Jan 11 1999 - 18:53:23 EET)
5220 resin Chris Sutcliffe (Mon Jan 11 1999 - 19:44:26 EET)
Cruise in September 1999 Guy.Bourdeau@coulter.com (Mon Jan 11 1999 - 19:38:00 EET)
Re: 5220 resin Guy.Bourdeau@coulter.com (Mon Jan 11 1999 - 21:31:00 EET)
SLA Bureaus - Somos 8100 Ron Clemons (Mon Jan 11 1999 - 19:21:01 EET)
Re: epoxy properties Tsuneo Hagiwara (Tue Jan 12 1999 - 06:15:54 EET)
RE: epoxy properties Prof P. M. Dickens (Tue Jan 12 1999 - 18:44:54 EET)
Stratasys V-P Files Form 144, To Sell Shares Yakov Horenstein (Tue Jan 12 1999 - 12:06:20 EET)
DTM News [Fwd] Yakov Horenstein (Tue Jan 12 1999 - 12:04:59 EET)
flexural properties of epoxy STUART BROWN (Tue Jan 12 1999 - 12:55:00 EET)
Plynetics Express' Web site Stucarol1@aol.com (Tue Jan 12 1999 - 15:12:19 EET)
Re: Plynetics Express' Web site Doug Greenwood (Tue Jan 12 1999 - 15:31:12 EET)
Re: Actua part cleanup, sanding, repair Wade Williams (Tue Jan 12 1999 - 18:47:21 EET)
Re: epoxy properties Wade Williams (Tue Jan 12 1999 - 19:09:36 EET)
Vacuum Forming Michael Maurice (Tue Jan 12 1999 - 16:16:40 EET)
RE: Plynetics Express' Web site Jim Rollins (Tue Jan 12 1999 - 18:23:08 EET)
STLPACK for FreeBSD Evegeny Kotsuba (Tue Jan 12 1999 - 17:53:03 EET)
Re: Vacuum Forming E.M. Groenewolt (Tue Jan 12 1999 - 18:31:14 EET)
Re: Vacuum Forming Foamcaster@aol.com (Tue Jan 12 1999 - 19:01:29 EET)
Re: Vacuum Forming Johannes Eschl (Tue Jan 12 1999 - 20:28:13 EET)
Pentium Upgrade for SLA250 O'Neill, Christopher F. (Wed Jan 13 1999 - 17:09:11 EET)
Mold Release Agent Rodrigo_B_Maria@multibras.com.br (Wed Jan 13 1999 - 19:45:52 EET)
Re: Pentium Upgrade for SLA250 ralott@mail.hac.com (Wed Jan 13 1999 - 19:18:53 EET)
FW: Be a part of an exclusive plastic parts program that will assist you in taking your products to market faster!!! Marina Shara (Wed Jan 13 1999 - 20:44:35 EET)
Re: Mold Release Agent Drew Brown (Wed Jan 13 1999 - 20:50:20 EET)
Re: Pentium Upgrade for SLA250 long time (Wed Jan 13 1999 - 21:41:49 EET)
seeking thoughts on Somos 8100 Miller, Michael W (Thu Jan 14 1999 - 02:42:03 EET)
SLA - 500 equipment Jim Abendroth (Thu Jan 14 1999 - 07:07:39 EET)
FW: Medical Resins Popat Ajay AH (Thu Jan 14 1999 - 11:16:50 EET)
SLA250HR DANIEL CHARLES DAVIS (Thu Jan 14 1999 - 12:30:09 EET)
RP Company Elaine Hunt (Thu Jan 14 1999 - 17:38:44 EET)
New SL-resin from RPC Steinmann (Thu Jan 14 1999 - 17:36:41 EET)
I need descriptions of the following Elaine Hunt (Thu Jan 14 1999 - 17:55:39 EET)
SLA, SLS, FDM in Europe Terry T. Wohlers (Thu Jan 14 1999 - 18:09:30 EET)
Plynetics website dbassett (Thu Jan 14 1999 - 18:24:57 EET)
Re: CNC High Speed Machining as Alternative of Rapid Tooling PnRMolds@aol.com (Thu Jan 14 1999 - 20:00:48 EET)
seeking thoughts on Somos 8120 Gabe Clark (Thu Jan 14 1999 - 20:07:04 EET)
Re: Plynetics website Kerry Cooper (Thu Jan 14 1999 - 20:09:49 EET)
Re: Plynetics website dbassett (Thu Jan 14 1999 - 22:10:09 EET)
1999 3DSNASUG Conference & Meeting (2nd Announcement) Guy.Bourdeau@coulter.com (Thu Jan 14 1999 - 22:48:01 EET)
Re: Plynetics website Mike Durham (Thu Jan 14 1999 - 23:04:34 EET)
Re: Plynetics website (No Longer Active) harvest@harvest-tech.com (Thu Jan 14 1999 - 17:45:15 EET)
Very clever - Plynetics website - guerilla marketing Mark Littlewood (Thu Jan 14 1999 - 23:43:04 EET)
Re: Plynetics website Jim Vander Linden (Fri Jan 15 1999 - 01:13:02 EET)
Re: seeking thoughts on 8120 Kamesh Tata (Fri Jan 15 1999 - 06:36:47 EET)
Re: I need descriptions of the following Henri Koukka (Fri Jan 15 1999 - 08:34:10 EET)
re:LM24 Castings james mason (Fri Dec 18 1998 - 12:37:23 EET)
RE: seeking thoughts on 8120 Popat Ajay AH (Fri Jan 15 1999 - 12:31:44 EET)
[Fwd] Actify's 3D View Yakov Horenstein (Fri Jan 15 1999 - 11:50:54 EET)
Re: seeking thoughts on Somos 8120 Jay Jacobs (Fri Jan 15 1999 - 16:23:57 EET)
SL5220 Resin - UK only..... Allan E W Rennie (Fri Jan 15 1999 - 16:50:22 EET)
RE: CNC High Speed Machining as Alternative of Rapid Tooling will pattison (Fri Jan 15 1999 - 17:01:17 EET)
Re: CNC High Speed Machining as Alternative of Rapid Tooling Wade Williams (Fri Jan 15 1999 - 21:00:48 EET)
Re: CNC High Speed Machining as Alternative of Rapid Tooling Drew Brown (Fri Jan 15 1999 - 18:00:24 EET)
RE: CNC High Speed Machining as Alternative of Rapid Tooling Lytle, Tom (Fri Jan 15 1999 - 19:11:09 EET)
Re: CNC High Speed Machining as Alternative of Rapid Tooling B. J. Arnold-Feret (Fri Jan 15 1999 - 19:17:30 EET)
Decline & bankruptcy Chris Lloyd (Fri Jan 15 1999 - 20:19:35 EET)
and they said it couldn't be done Elaine Hunt (Fri Jan 15 1999 - 20:39:01 EET)
Re: seeking thoughts on 8120 James Neville (Fri Jan 15 1999 - 22:15:24 EET)
new technology Elaine Hunt (Fri Jan 15 1999 - 22:36:23 EET)
Re: Decline & bankruptcy SCat3D@aol.com (Fri Jan 15 1999 - 22:50:49 EET)
Re: Decline & bankruptcy Scott -Scooter- Sutterer (Fri Jan 15 1999 - 23:10:52 EET)
Re[2]: Decline & bankruptcy jim@paramountind.com (Fri Jan 15 1999 - 23:36:40 EET)
Fore! Yakov Horenstein (Fri Jan 15 1999 - 23:47:37 EET)
fdm users SIBCOINC@aol.com (Fri Jan 15 1999 - 23:44:36 EET)
Re: future?? MET-L-FLO INC. (Fri Jan 15 1999 - 23:54:07 EET)
Re: new technology Joe Allison (Sat Jan 16 1999 - 00:12:49 EET)
Re: Decline & bankruptcy Joe Allison (Sat Jan 16 1999 - 00:19:43 EET)
Off topic - Friday humor Spielman, Roger L (Sat Jan 16 1999 - 01:41:11 EET)
Re: Decline & bankruptcy Yakov Horenstein (Sat Jan 16 1999 - 02:50:08 EET)
Off-topic-More Friday humor Monica & Glenn Whiteside (Sat Jan 16 1999 - 03:20:27 EET)
micro rp microtec (Sat Jan 16 1999 - 15:32:34 EET)
Re: Decline & bankruptcy Rick Harrington (Sat Jan 16 1999 - 16:07:22 EET)
world crisis Chris Lloyd (Sat Jan 16 1999 - 18:21:14 EET)
(no subject) Chris Lloyd (Sat Jan 16 1999 - 20:00:31 EET)
info about me Chris Lloyd (Sat Jan 16 1999 - 21:40:14 EET)
Duraform GF Vern Carter (Sun Jan 17 1999 - 04:18:15 EET)
regarding scanners ASIT KR. AGARWAL (Sun Jan 17 1999 - 10:01:33 EET)
Re: regarding scanners Rudolf Schenker (Sun Jan 17 1999 - 15:12:24 EET)
Re: world crisis long time (Sun Jan 17 1999 - 17:57:55 EET)
Re: regarding scanners Marshall Burns (Sun Jan 17 1999 - 20:37:18 EET)
Re: world crisis Steven Pollack (Mon Jan 18 1999 - 00:45:43 EET)
New Web Page Travis Behara (Mon Jan 18 1999 - 03:40:06 EET)
Re: world crisis SCat3D@aol.com (Mon Jan 18 1999 - 05:33:43 EET)
Re: world crisis Phil Harnett (Mon Jan 18 1999 - 06:32:30 EET)
Re: regarding scanners Alain BERNARD (Mon Jan 18 1999 - 12:16:27 EET)
Build size for Duraform and GF duraform Yannick seeleuthner (Mon Jan 18 1999 - 12:00:26 EET)
Properly addressed e-mails stephen.windsor@roverpte.demon.co.uk (Mon Jan 18 1999 - 12:45:14 EET)
Re: Build size for Duraform and GF duraform tjgorn01 (Mon Jan 18 1999 - 14:32:39 EET)
SOMOS 8100 resin Speer, Robert J. (Mon Jan 18 1999 - 14:48:01 EET)
Re: new technology Elaine Hunt (Mon Jan 18 1999 - 15:03:11 EET)
systems in 3D Serveis Tecnol�gics (Mon Jan 18 1999 - 17:37:56 EET)
Re: world crisis Foamcaster@aol.com (Mon Jan 18 1999 - 18:08:58 EET)
World Economy vs US RP Market Joe Allison (Mon Jan 18 1999 - 21:43:46 EET)
stratasys Elaine Hunt (Mon Jan 18 1999 - 21:53:13 EET)
Is Big Blue Watching You? MR ALBIN A HASTBACKA (Mon Jan 18 1999 - 20:29:20 EET)
[Fwd: please forward...] Vito Gervasi (Mon Jan 18 1999 - 22:44:21 EET)
Re: Is Big Blue Watching You? Tom Richards (Tue Jan 19 1999 - 02:07:56 EET)
RE: World Economy vs US RP Market Brock Hinzmann (Mon Jan 18 1999 - 23:24:20 EET)
Re: World Economy vs US RP Market & world crisis Ron Clemons (Mon Jan 18 1999 - 17:36:46 EET)
Re: Is Big Blue Watching You? MR ALBIN A HASTBACKA (Mon Jan 18 1999 - 21:52:43 EET)
Advanced Product Development Technologies in Action at the Rosemont Convention Center!!! Marina Shara (Tue Jan 19 1999 - 00:18:33 EET)
1999 3DSNASUG Conference & Meeting Joe Allison (Tue Jan 19 1999 - 01:20:27 EET)
Re: World Economy vs US RP Market & world crisis Steven Pollack (Tue Jan 19 1999 - 00:54:43 EET)
Re: Is Big Blue Watching You? Stephen Rock (Tue Jan 19 1999 - 03:40:15 EET)
RE: Is Big Blue Watching You? Halford, Ben (Tue Jan 19 1999 - 11:36:18 EET)
Re: Mold Release Agent Rodrigo_B_Maria@multibras.com.br (Tue Jan 19 1999 - 12:46:39 EET)
Stratasys Yakov Horenstein (Tue Jan 19 1999 - 14:31:03 EET)
First International SolidWorks User Conference Yakov Horenstein (Tue Jan 19 1999 - 14:29:35 EET)
Re: World Economy vs US RP market Drew Brown (Tue Jan 19 1999 - 14:55:19 EET)
RE: World Economy vs US RP Market Elaine Hunt (Tue Jan 19 1999 - 14:50:11 EET)
RE: regarding scanners Joel Bisson (Tue Jan 19 1999 - 15:42:18 EET)
RE: regarding scanners Rafael Santillan (Tue Jan 19 1999 - 16:36:46 EET)
3d press release - nt software Todd Reese (Tue Jan 19 1999 - 16:54:16 EET)
Fwd: RE: regarding scanners Elaine Hunt (Tue Jan 19 1999 - 16:54:50 EET)
AIM Molding Parameters Todd Kohne (Tue Jan 19 1999 - 17:24:13 EET)
Re: 3d press release - nt software Scott -Scooter- Sutterer (Tue Jan 19 1999 - 17:26:57 EET)
comparison Ricardo (Tue Jan 19 1999 - 17:59:46 EET)
Re: AIM Molding Parameters Sadegh Rahmati (Tue Jan 19 1999 - 18:07:50 EET)
Re: World Economy vs US RP market harvest@harvest-tech.com (Tue Jan 19 1999 - 15:40:26 EET)
Prototyping with Consumer Focus Group Services Needed Michele Starr-Stapell (Tue Jan 19 1999 - 22:34:24 EET)
Rapid Prototyping Patents (1994-1998) ChathamRes@aol.com (Tue Jan 19 1999 - 23:05:37 EET)
file conversion Robert Meltzer (Tue Jan 19 1999 - 23:17:50 EET)
Anyone with Actua problems? SCat3D@aol.com (Tue Jan 19 1999 - 23:21:32 EET)
Re: World Economy vs US RP Market B. J. Arnold-Feret (Tue Jan 19 1999 - 23:41:34 EET)
Re: World Economy vs US RP Market & world crisis Ron Clemons (Tue Jan 19 1999 - 18:07:47 EET)
"Sweeper..." Sergio Martins (Wed Jan 20 1999 - 00:35:51 EET)
Re: Prototyping with Consumer Focus Group Services Needed Rick Harrington (Wed Jan 20 1999 - 00:45:42 EET)
Urethanes for SLA Systems MR ALBIN A HASTBACKA (Tue Jan 19 1999 - 23:24:35 EET)
3D Systems Unveils ``3D Lightyear'' Yakov Horenstein (Wed Jan 20 1999 - 01:51:48 EET)
Re: "Sweeper..." Sergio Martins (Wed Jan 20 1999 - 01:47:56 EET)
RE: Prototyping with Consumer Focus Group Services Needed Brock Hinzmann (Wed Jan 20 1999 - 04:24:07 EET)
Re: Anyone with Actua problems? Steve Upcraft (Wed Jan 20 1999 - 11:18:07 EET)
[Fwd: Urethanes for SLA Systems] bmacier@andisco.com (Wed Jan 20 1999 - 14:50:20 EET)
Re: Urethanes for SLA Systems Wade Williams (Wed Jan 20 1999 - 18:50:01 EET)
Re: Urethanes for SLA Systems Tom Richards (Wed Jan 20 1999 - 19:01:33 EET)
Re: Urethanes for SLA Systems Jim Vander Linden (Wed Jan 20 1999 - 17:11:30 EET)
Build Time Estimator Impact - Doug Johnson (Wed Jan 20 1999 - 16:21:08 EET)
Re: Build Time Estimator Scott -Scooter- Sutterer (Wed Jan 20 1999 - 16:55:57 EET)
stl parts pricing Jordan Joseph W DLPC (Wed Jan 20 1999 - 17:50:09 EET)
PRICING OF SL PARTS Jordan Joseph W DLPC (Wed Jan 20 1999 - 18:36:53 EET)
RE: stl parts pricing Halford, Ben (Wed Jan 20 1999 - 19:12:54 EET)
SEAGATE AS AN SLA SUPPLIER? ChathamRes@aol.com (Wed Jan 20 1999 - 22:46:39 EET)
Format conversion Robert Meltzer (Wed Jan 20 1999 - 23:46:02 EET)
Rhino News Bob McNeel (Wed Jan 20 1999 - 01:20:31 EET)
Digital Camera Recommendations? Monica & Glenn Whiteside (Thu Jan 21 1999 - 06:38:51 EET)
UV cured Rubber/Resin Required Shreyas J Bakshi (Thu Jan 21 1999 - 12:30:13 EET)
supplier rtv silicone and polyurethane Steve Butler (Thu Jan 21 1999 - 15:24:07 EET)
Re: Digital Camera Recommendations? tjgorn01 (Thu Jan 21 1999 - 15:35:59 EET)
Re: Digital Camera Recommendations? Mark Bannister (Thu Jan 21 1999 - 17:27:33 EET)
Re: supplier rtv silicone and polyurethane Nathaniel J. Leon (Thu Jan 21 1999 - 16:28:01 EET)
FW: Digital Camera Recommendations? Denton, Karl R. KD1588 (Thu Jan 21 1999 - 18:55:00 EET)
file conversion Robert Meltzer (Thu Jan 21 1999 - 17:11:13 EET)
Re: Digital Camera Recommendations? Justin R. Kidder (Thu Jan 21 1999 - 17:06:41 EET)
FW: Digital Camera Recommendations? liu@ncat.edu (Thu Jan 21 1999 - 17:18:52 EET)
Re: UV cured Rubber/Resin Required Bradley VanDike (Thu Jan 21 1999 - 18:07:17 EET)
RE: Digital Camera Recommendations? Spielman, Roger L (Thu Jan 21 1999 - 18:20:55 EET)
RE: Digital Camera Recommendations? [Getting off the RP thread a little but...] Somsel, Jim P. (Thu Jan 21 1999 - 18:55:15 EET)
Digital Cameras Tom Richards (Thu Jan 21 1999 - 22:24:27 EET)
Abstract Deadline Reminder - TCT 99 Mark Littlewood (Thu Jan 21 1999 - 20:25:23 EET)
inspection presentation Joel Bisson (Fri Jan 22 1999 - 00:12:05 EET)
Resin-based direct tooling MIN CHANG-SHIK (Fri Jan 22 1999 - 04:17:02 EET)
RP Medical Applications ASH78216@aol.com (Fri Jan 22 1999 - 06:32:38 EET)
[Fwd: UV cured Rubber/Resin Required] Shreyas J Bakshi (Fri Jan 22 1999 - 06:49:20 EET)
RP Medical Applications ASH78216@aol.com (Fri Jan 22 1999 - 06:51:44 EET)
Re: RP Medical Applications Shreyas J Bakshi (Fri Jan 22 1999 - 08:40:15 EET)
Re: Resin-based direct tooling MIN CHANG-SHIK (Fri Jan 22 1999 - 10:05:20 EET)
RP and Y2K harvest@harvest-tech.com (Fri Jan 22 1999 - 10:40:44 EET)
Re: Resin-based direct tooling Tsuneo Hagiwara (Fri Jan 22 1999 - 17:41:30 EET)
RE: RP Medical Applications Justin Kidder (Fri Jan 22 1999 - 18:14:05 EET)
DTM macine checksum Stephane Picard (Fri Jan 22 1999 - 18:53:00 EET)
High School Projects Steven (Fri Jan 22 1999 - 20:57:10 EET)
Re: High School Projects Scott -Scooter- Sutterer (Fri Jan 22 1999 - 21:36:45 EET)
Re: High School Projects Marshall Burns (Fri Jan 22 1999 - 21:37:12 EET)
Carbon Fibers and Stereolithography resin O'Neill, Christopher F. (Fri Jan 22 1999 - 22:09:02 EET)
Re: High School Projects Justin R. Kidder (Fri Jan 22 1999 - 22:54:38 EET)
Carbon Fibers and Stereolithography resin Monica & Glenn Whiteside (Sat Jan 23 1999 - 00:24:21 EET)
Off-Topic, Friday Humor (Clean jokes). Monica & Glenn Whiteside (Sat Jan 23 1999 - 00:39:47 EET)
Re: Carbon Fibers and Stereolithography resin Marshall Burns (Sat Jan 23 1999 - 00:27:15 EET)
RE: Carbon Fibers and Stereolithography resin Peter Blacklin (Sat Jan 23 1999 - 02:44:16 EET)
RE: High School Projects Peter Blacklin (Sat Jan 23 1999 - 02:37:50 EET)
Used Omnichrome laser... Steve Hengsperger (Sat Jan 23 1999 - 17:55:39 EET)
Re: 3d press release - nt software ATiburon@aol.com (Sat Jan 23 1999 - 17:57:49 EET)
Silver Investment Casting MR ALBIN A HASTBACKA (Sat Jan 23 1999 - 20:59:52 EET)
RE: Digital Camera recommendations-summary of responses Monica & Glenn Whiteside (Sun Jan 24 1999 - 00:11:55 EET)
CAD animation Marshall Burns (Sun Jan 24 1999 - 21:06:06 EET)
FDMet Wu Guohua (Sun Jan 24 1999 - 18:05:47 EET)
Re: Silver Investment Casting Tom Richards (Mon Jan 25 1999 - 01:08:54 EET)
Newbie's opening volley. Paul Burr (Mon Jan 25 1999 - 04:21:35 EET)
resin-based direct tooling Innomation Systems & Technologies Pte. Ltd., (Mon Jan 25 1999 - 14:24:15 EET)
Fw: RP Medical Applications Innomation Systems & Technologies Pte. Ltd., (Mon Jan 25 1999 - 14:28:44 EET)
Fw: Newbie's opening volley. Innomation Systems & Technologies Pte. Ltd., (Mon Jan 25 1999 - 14:14:28 EET)
Rapid Prototyping Patents 99 ChathamRes@aol.com (Mon Jan 25 1999 - 15:29:40 EET)
Re: RP Medical Applications Robert Thompson (Mon Jan 25 1999 - 15:34:33 EET)
Re: Newbie's opening volley. Bert VandenBerg (Mon Jan 25 1999 - 16:13:25 EET)
Coatings for on paper models to make plaster molds j.Gunnink@ind.tno.nl (Mon Jan 25 1999 - 17:55:13 EET)
Re: Newbie's opening volley. Paul J. Burr (Mon Jan 25 1999 - 20:51:45 EET)
Slicing Software Bahattin Koc (Tue Jan 26 1999 - 01:53:10 EET)
SL Resin Strength DANIEL CHARLES DAVIS, RP (Tue Jan 26 1999 - 06:25:02 EET)
Material properties for cured SL5170 Neil Hopkinson (Tue Jan 26 1999 - 11:15:07 EET)
[Fwd] StereoGraphics Yakov Horenstein (Tue Jan 26 1999 - 11:50:37 EET)
[Fwd] CIMLOGIC Yakov Horenstein (Tue Jan 26 1999 - 11:48:17 EET)
SL Resin Strength Andrew_Chantrill (Tue Jan 26 1999 - 13:05:11 EET)
Re: SL Resin Strength Drew Brown (Tue Jan 26 1999 - 15:34:38 EET)
Fwd: SL Resin Strength Elaine Hunt (Tue Jan 26 1999 - 15:54:45 EET)
Re: Material properties for cured SL5170 MET-L-FLO INC. (Tue Jan 26 1999 - 16:06:11 EET)
Slicing problems Alta Precision (Tue Jan 26 1999 - 15:59:52 EET)
Patents FREE site Rafael Santillan (Tue Jan 26 1999 - 16:36:21 EET)
Re: SL Resin Strength Simon_Van_de_Crommert/gmbh/DTM@dtm-corp.com (Tue Jan 26 1999 - 16:39:38 EET)
SLA and humidity E.M. Groenewolt (Tue Jan 26 1999 - 16:48:18 EET)
Re: Slicing problems Scott -Scooter- Sutterer (Tue Jan 26 1999 - 17:07:12 EET)
Re: Material properties for cured SL5170 bo yang me stnt (Tue Jan 26 1999 - 18:30:30 EET)
Re: SL Resin Strength Ron Clemons (Tue Jan 26 1999 - 12:26:52 EET)
Re: Material properties for cured SL5170 Steve Stewart (Tue Jan 26 1999 - 18:46:56 EET)
RE: Newbie's opening volley. razdan (Tue Jan 26 1999 - 21:45:50 EET)
Request for information Marco Voster (Tue Jan 26 1999 - 21:53:43 EET)
Re: SLA and humidity Martin CM Wong (IC) (Wed Jan 27 1999 - 03:16:22 EET)
RE: Material properties for cured SL5170 DANIEL CHARLES DAVIS, RP (Wed Jan 27 1999 - 02:31:44 EET)
RE: Request for information DANIEL CHARLES DAVIS, RP (Wed Jan 27 1999 - 03:07:45 EET)
Re: SL Resin Strength Ed Wilson (Wed Jan 27 1999 - 03:58:45 EET)
Re: Slicing large STL files Frankie Kwok (Wed Jan 27 1999 - 08:32:57 EET)
Article from National Conference on Rapid Prototyping (1990) #ANG BENG YEW# (Wed Jan 27 1999 - 08:51:51 EET)
Summary of SL strength DANIEL CHARLES DAVIS, RP (Wed Jan 27 1999 - 11:06:49 EET)
Z402 query (owners/operators only) DANIEL CHARLES DAVIS, RP (Wed Jan 27 1999 - 11:27:30 EET)
Fwd: Article from National Conference on Rapid Prototyping (1990) Elaine Hunt (Wed Jan 27 1999 - 14:58:53 EET)
Injection moulds using concrete Mnr. D de Beer (Wed Jan 27 1999 - 16:33:25 EET)
Quality of Free Patent Searches on the IBM site? ChathamRes@aol.com (Wed Jan 27 1999 - 16:51:58 EET)
RE: Injection moulds using concrete Bauer Juergen (Wed Jan 27 1999 - 17:15:33 EET)
Wanted to buy: Laser Pure 20 Circulator Bill Noack (Wed Jan 27 1999 - 17:05:46 EET)
Re: Z402 query (owners/operators only) Vern Carter (Wed Jan 27 1999 - 20:44:43 EET)
RP Systems - Used Machines Dev Thevalingam (Thu Jan 28 1999 - 01:34:22 EET)
SLA and humidity Monica & Glenn Whiteside (Thu Jan 28 1999 - 05:57:12 EET)
(no subject) Herve de Baillenx (Wed Jan 27 1999 - 09:42:54 EET)
Fwd: SLA and humidity Michelle P. Wyatt (Thu Jan 28 1999 - 11:30:39 EET)
Pro/E files Cheng-Hsin Liu (Thu Jan 28 1999 - 19:07:28 EET)
Pro/E files Cheng-Hsin Liu (Thu Jan 28 1999 - 19:06:30 EET)
Pro/E files Cheng-Hsin Liu (Thu Jan 28 1999 - 19:11:32 EET)
Pro/E files by way of (Thu Jan 28 1999 - 20:40:05 EET)
Re: Z402 query (owners/operators only) Vern Carter (Thu Jan 28 1999 - 20:39:52 EET)
Pro/E files by way of (Thu Jan 28 1999 - 20:40:07 EET)
Pro/E files by way of (Thu Jan 28 1999 - 20:40:03 EET)
Off-topic: Friday Humor Monica & Glenn Whiteside (Fri Jan 29 1999 - 02:58:27 EET)
Fw: Slicing large STL files Frankie Kwok (Fri Jan 29 1999 - 06:50:10 EET)
Automation in Construction Journal - special issue Ian Gibson (Fri Jan 29 1999 - 07:07:56 EET)
Algorithm for conversion from solid model to STL file sandeep gupta (Fri Jan 29 1999 - 07:22:33 EET)
Selling/Exchange SOMOS6110 with SL5170 inmyung@unitel.co.kr (Fri Jan 29 1999 - 06:19:16 EET)
Reverse Engineering Jobs philip (Thu Jan 28 1999 - 18:24:09 EET)
Re: Alain BERNARD (Fri Jan 29 1999 - 09:45:28 EET)
Selling or Exchanging resin inmyung@unitel.co.kr (Fri Jan 29 1999 - 09:41:53 EET)
Silicone recycling tips? DANIEL CHARLES DAVIS, RP (Fri Jan 29 1999 - 12:19:46 EET)
How to find Dennis Fogle Steve Hengsperger (Fri Jan 29 1999 - 14:43:12 EET)
Re: Silicone recycling tips? MET-L-FLO INC. (Fri Jan 29 1999 - 15:48:54 EET)
Mold Design Leeann Starr Lane (Fri Jan 29 1999 - 16:18:43 EET)
Post Cure of SL 5410 Resin Carr, Gary E. (Fri Jan 29 1999 - 16:57:36 EET)
Rapid prototyping Nigel Coe (Fri Jan 29 1999 - 16:56:54 EET)
SL5410 Post Curing Carr, Gary E. (Fri Jan 29 1999 - 17:30:47 EET)
WTB: Used Stratasys FDM electraders@excite.com (Fri Jan 29 1999 - 17:38:06 EET)
WTB: Used Stratasys FDM electraders@excite.com (Fri Jan 29 1999 - 17:38:13 EET)
Want to Buy Used FDM electraders@excite.com (Fri Jan 29 1999 - 17:40:23 EET)
RP employment Monica & Glenn Whiteside (Sat Jan 30 1999 - 22:08:42 EET)
Internship/Co-op John W Clune (Sun Jan 31 1999 - 01:56:54 EET)
ModelMaster Art2Part Paul Burr (Mon Feb 01 1999 - 03:37:57 EET)
accuracy comparison R G (Mon Feb 01 1999 - 05:21:32 EET)
Re: accuracy comparison S.A.D.P. Susantha (Mon Feb 01 1999 - 08:11:45 EET)
Ambiguous Measurement Terminology MR ALBIN A HASTBACKA (Mon Feb 01 1999 - 14:27:00 EET)
Re: Ambiguous Measurement Terminology Tom Richards (Mon Feb 01 1999 - 20:18:15 EET)
Re: Ambiguous Measurement Terminology Kitty Seerden (Mon Feb 01 1999 - 17:35:08 EET)
RE: Ambiguous Measurement Terminology Hodder, David J (Mon Feb 01 1999 - 17:45:20 EET)
Ambiguous Measurement Terminology Andrzejewski, Jan (Mon Feb 01 1999 - 19:05:45 EET)
Re: Ambiguous Measurement Terminology Advantage Prototype systems (Mon Feb 01 1999 - 19:59:02 EET)
Re: Ambiguous Measurement Terminology 9410563 sanat agrawal pg me (Mon Feb 01 1999 - 19:04:46 EET)
Re: Ambiguous Measurement Terminology cwho (Mon Feb 01 1999 - 19:21:36 EET)
Off topic humor: Scientific data about Knat's asses Mark Wynn (Mon Feb 01 1999 - 23:06:54 EET)
SL5180 for Sale Bill Noack (Tue Feb 02 1999 - 01:35:36 EET)
RTV/vacuum casting Terry T. Wohlers (Tue Feb 02 1999 - 01:56:05 EET)
Re: Ambiguous Measurement Terminology Marshall Burns (Tue Feb 02 1999 - 05:43:08 EET)
(no subject) dfboyer@ix.netcom.com (Tue Feb 02 1999 - 10:21:05 EET)
RE: Ambiguous Measurement Terminology graham.tromans@roverpte.demon.co.uk (Tue Feb 02 1999 - 12:41:50 EET)
Re: Ambiguous Measurement Terminology Neil Hopkinson (Tue Feb 02 1999 - 14:07:20 EET)
Re: Ambiguous Measurement Terminology, slightly off topic Rick Harrington (Tue Feb 02 1999 - 15:25:52 EET)
a proud RP moment Elaine Hunt (Tue Feb 02 1999 - 15:47:49 EET)
Humour: Ambiguous Measurement Terminology Andrzejewski, Jan (Tue Feb 02 1999 - 16:20:09 EET)
Re: Ambiguous Measurement Terminology, slightly off topic EdGrenda@aol.com (Tue Feb 02 1999 - 16:37:09 EET)
RE:still off topic Ambiguous Measurement Terminology Klas Boivie (Tue Feb 02 1999 - 16:44:58 EET)
Web Page for 8th European RP&M Conference IAN CAMPBELL (Tue Feb 02 1999 - 17:22:12 EET)
Re: RE:still off topic Ambiguous Measurement Terminology RP List (Tue Feb 02 1999 - 18:58:41 EET)
RE: Ambiguous Measurement Terminology, slightly off topic Hodder, David J (Tue Feb 02 1999 - 19:04:19 EET)
Re[2]: Ambiguous Measurement Terminology, slightly off topic jim@paramountind.com (Tue Feb 02 1999 - 19:20:10 EET)
Re[3]: Ambiguous Measurement Terminology, slightly off topic tom@paramountind.com (Tue Feb 02 1999 - 19:46:13 EET)
Rapid Tooling and Rapid Prototyping Christina Fuges (Tue Feb 02 1999 - 19:54:09 EET)
RE: Ambiguous Terminology Hodder, David J (Tue Feb 02 1999 - 20:18:53 EET)
Re: Rapid Tooling and Rapid Prototyping Tom Richards (Wed Feb 03 1999 - 00:19:56 EET)
seeking thoughts on Somos 8120 Gabe Clark (Tue Feb 02 1999 - 21:27:42 EET)
scanning Gabe Clark (Tue Feb 02 1999 - 21:50:05 EET)
Re: Rapid Tooling and Rapid Prototyping Christian_Nelson/DTM@dtm-corp.com (Tue Feb 02 1999 - 22:28:11 EET)
used equipment Jim Abendroth (Tue Feb 02 1999 - 22:34:38 EET)
Classification of RP MIN CHANG-SHIK (Wed Feb 03 1999 - 00:42:03 EET)
Any locals with CNC advice? Paul Burr (Wed Feb 03 1999 - 02:40:29 EET)
Classification of RP MIN CHANG-SHIK (Wed Feb 03 1999 - 00:42:07 EET)
FW: Ambiguous Measurement Terminology Olson, Paul (Wed Feb 03 1999 - 03:06:28 EET)
Off topic: Very small holes in steel Terry T. Wohlers (Wed Feb 03 1999 - 03:23:17 EET)
Re: Ambiguous Measurement Terminology (Refined) Chris Cramer (Wed Feb 03 1999 - 04:59:44 EET)
Re: Re[3]: Ambiguous Measurement Terminology, slightly off topic David (Thor) Maxfield (Wed Feb 03 1999 - 08:44:36 EET)
Re: accuracy comparison Alain BERNARD (Wed Feb 03 1999 - 09:21:51 EET)
Re: Ambiguous Measurement Terminology (Refined) John Wright (Wed Feb 03 1999 - 11:13:43 EET)
RE: Ambiguous Measurement Terminology (Refined) Bauer Juergen (Wed Feb 03 1999 - 12:06:35 EET)
"slice problem" Sergio Martins (Wed Feb 03 1999 - 12:32:23 EET)
DSPC-system? Anu Pettersson (Wed Feb 03 1999 - 14:51:35 EET)
Post Cure of SL5220 pgubb@howmet.com (Wed Feb 03 1999 - 19:20:59 EET)
DSPC-system? Anu Pettersson (Wed Feb 03 1999 - 15:46:41 EET)
Re: DSPC-system? Wayne L Foss (Wed Feb 03 1999 - 15:52:56 EET)
to buy or lease ? Andrzejewski, Jan (Wed Feb 03 1999 - 16:16:19 EET)
Re: Off topic: Very small holes in steel Nathaniel J. Leon (Wed Feb 03 1999 - 17:04:42 EET)
LOM build source? Jack Wittlich (Wed Feb 03 1999 - 17:19:39 EET)
RE: DSPC-system? Jeff McBride (Wed Feb 03 1999 - 17:29:09 EET)
RE: Off topic: Very small holes in steel Haut, Rob - GCP (Wed Feb 03 1999 - 17:46:43 EET)
Re: Off topic: Very small holes in steel Tom Richards (Wed Feb 03 1999 - 20:56:53 EET)
Re: Post Cure of SL5220 Guy.Bourdeau@coulter.com (Wed Feb 03 1999 - 17:54:03 EET)
Re[2]: Ambiguous Measurement Terminology (Refined) jim@paramountind.com (Wed Feb 03 1999 - 18:53:32 EET)
Re: Off topic: Very small holes in steel Fusioneng@aol.com (Wed Feb 03 1999 - 19:06:38 EET)
Re: scanning Steve Upcraft (Wed Feb 03 1999 - 19:56:08 EET)
RE: DSPC-system? Wayne L Foss (Wed Feb 03 1999 - 21:21:05 EET)
Re: Off topic: Very small holes in steel Marshall Burns (Wed Feb 03 1999 - 22:40:20 EET)
Re: DSPC-system? Marshall Burns (Wed Feb 03 1999 - 23:36:01 EET)
Fw: Off topic: Very small holes in steel Monica & Glenn Whiteside (Thu Feb 04 1999 - 04:47:58 EET)
Silicon mould & casting using an SLS master Sergio Martins (Thu Feb 04 1999 - 11:36:25 EET)
(no subject) Andrzejewski, Jan (Thu Feb 04 1999 - 12:04:15 EET)
Re: Silicon mould & casting using an SLS master MET-L-FLO INC. (Thu Feb 04 1999 - 16:49:47 EET)
Sober thoughts Yakov Horenstein (Thu Feb 04 1999 - 13:41:11 EET)
.010 Slice Build on SLA500 Timmel, Ingrid (Thu Feb 04 1999 - 17:38:26 EET)
Re: accuracy comparison Steve Farentinos (Thu Feb 04 1999 - 16:33:30 EET)
Cover images for magazine - can you help? Mark Littlewood (Thu Feb 04 1999 - 19:10:06 EET)
(no subject) Ray Thompson (Thu Feb 04 1999 - 22:33:09 EET)
.. sandy83792@yahoo.com (Thu Feb 04 1999 - 11:05:02 EET)
Re: Ambiguous Measurement Terminology, slightly off topic Glyn Churchman (Fri Feb 05 1999 - 02:00:13 EET)
sign off for a period Xiang Fang (Fri Feb 05 1999 - 04:41:08 EET)
Re: Ambiguous Measurement Terminology (Refined) David (Thor) Maxfield (Fri Feb 05 1999 - 06:43:20 EET)
Ambiguous Measurement terminology philip.price@roverpte.demon.co.uk (Fri Feb 05 1999 - 13:36:05 EET)
Re: (no subject) Wayne L Foss (Fri Feb 05 1999 - 16:04:03 EET)
Off-topic Friday funnies.... Monica & Glenn Whiteside (Fri Feb 05 1999 - 17:19:43 EET)
Rapid Manufacturing Center Brent Stucker (Fri Feb 05 1999 - 17:48:26 EET)
Re: Ambiguous Measurement terminology lblasch@opw-fc.com (Fri Feb 05 1999 - 11:08:33 EET)
3d press release Todd Reese (Fri Feb 05 1999 - 22:36:24 EET)
Hand-held laser scanner Monica & Glenn Whiteside (Fri Feb 05 1999 - 22:52:52 EET)
Scanning and Reverse Engineering success/failure stories Monica & Glenn Whiteside (Fri Feb 05 1999 - 23:00:35 EET)
STL weirdness. Paul Burr (Sat Feb 06 1999 - 17:03:43 EET)
For FDM users-Water soluble support material Monica & Glenn Whiteside (Mon Feb 08 1999 - 00:49:42 EET)
FW: STL weirdness. DANIEL CHARLES DAVIS (Mon Feb 08 1999 - 02:59:34 EET)
Surely this is a yolk Ian Gibson (Mon Feb 08 1999 - 03:45:47 EET)
The yolk is on me. Ian Gibson (Mon Feb 08 1999 - 09:58:22 EET)
Conferences C. HAUSER (Mon Feb 08 1999 - 13:14:37 EET)
Re: Conferences John Male (Mon Feb 08 1999 - 14:22:45 EET)
Gnat Derek.Harrell@dwtc.co.uk (Mon Feb 08 1999 - 14:42:34 EET)
Microns? Timmel, Ingrid (Mon Feb 08 1999 - 15:59:45 EET)
Re: Conferences Alain BERNARD (Mon Feb 08 1999 - 16:02:43 EET)
RP research groups Todd Stewart (Mon Feb 08 1999 - 18:28:51 EET)
Lasform Elaine Hunt (Mon Feb 08 1999 - 20:24:03 EET)
Re: Microns? Marshall Burns (Mon Feb 08 1999 - 20:31:53 EET)
new sla machine Todd Reese (Mon Feb 08 1999 - 21:12:07 EET)
RE: Lasform Mike House (Mon Feb 08 1999 - 22:02:21 EET)
Pure copper bars Impact - Doug Johnson (Mon Feb 08 1999 - 22:22:26 EET)
Looking for Small CNC Machine in Europe Jo�o Azenha (Mon Feb 08 1999 - 22:58:25 EET)
Expansion Thomas Trenary (Mon Feb 08 1999 - 23:51:29 EET)
re - Expansion B. J. Arnold-Feret (Tue Feb 09 1999 - 01:11:46 EET)
Re: new sla machine ATiburon@aol.com (Tue Feb 09 1999 - 02:30:14 EET)
Re: Pure copper bars Tom Richards (Tue Feb 09 1999 - 03:42:57 EET)
algorithms for STL format sandeep gupta (Tue Feb 09 1999 - 06:32:09 EET)
Re: Looking for Small CNC Machine in Europe Delft Spline Systems (Tue Feb 09 1999 - 12:05:09 EET)
Re: new sla machine MR ALBIN A HASTBACKA (Tue Feb 09 1999 - 13:58:37 EET)
Re: RP research groups bo yang me stnt (Tue Feb 09 1999 - 16:53:35 EET)
Re: new sla machine Scott -Scooter- Sutterer (Tue Feb 09 1999 - 16:54:42 EET)
Re: new sla machine Foamcaster@aol.com (Tue Feb 09 1999 - 16:58:56 EET)
Eurostampi Marshall Burns (Tue Feb 09 1999 - 17:36:16 EET)
RE: new sla machine Bauer Juergen (Tue Feb 09 1999 - 17:51:51 EET)
Materialise is looking for additional distributors johan (Tue Feb 09 1999 - 18:41:59 EET)
Ink-Jet Equipment Robert Maloney (Tue Feb 09 1999 - 19:56:47 EET)
Announce: Free SolidView Upgrade 3.2 now available Tom Vorgitch (Tue Feb 09 1999 - 21:52:59 EET)
Y2K Humor Bruce (Tue Feb 09 1999 - 23:56:04 EET)
RE: Y2K Humor Hodder, David J (Wed Feb 10 1999 - 00:28:20 EET)
AutoSketch StL? Marshall Burns (Wed Feb 10 1999 - 01:56:24 EET)
Re: Ink-Jet Equipment Marshall Burns (Wed Feb 10 1999 - 02:17:41 EET)
*** 3DSNASUG ANNOUNCEMENT *** Joe Allison (Wed Feb 10 1999 - 04:14:00 EET)
For FDM users-Water soluble support material Monica & Glenn Whiteside (Wed Feb 10 1999 - 07:01:07 EET)
Re: RP research groups Puneet Tandon (Wed Feb 10 1999 - 09:26:28 EET)
R: Eurostampi Promau - Area Marketing (Wed Feb 10 1999 - 11:04:15 EET)
List of RP Research Centres e.Radstok@ind.tno.nl (Wed Feb 10 1999 - 11:21:35 EET)
SLA 7000 Yakov Horenstein (Wed Feb 10 1999 - 11:48:47 EET)
job announcement (professorships) Ioannis Zuburtikudis (Wed Feb 10 1999 - 11:54:45 EET)
[Fwd: Message not deliverable] Ioannis Zuburtikudis (Wed Feb 10 1999 - 12:36:41 EET)
Re: a proud RP moment Nuno Reis (Wed Feb 10 1999 - 12:39:30 EET)
Looking for Service Bureau for Blower mold order. komocim@mail.hitel.net (Wed Feb 10 1999 - 13:24:34 EET)
Re: Looking for Service Bureau for Blower mold order. Wade Williams (Wed Feb 10 1999 - 18:47:00 EET)
Re: AutoSketch StL? kevan_jones@cemcom.com (Wed Feb 10 1999 - 17:29:49 EET)
Multiple feature solid model from reverse engineering Jack Feng (Wed Feb 10 1999 - 17:27:33 EET)
Re: Looking for Service Bureau for Blower mold order. B. J. Arnold-Feret (Wed Feb 10 1999 - 17:34:27 EET)
Re: Multiple feature solid model from reverse engineering Anshuman Razdan (Wed Feb 10 1999 - 18:21:32 EET)
A listing of RP & RE Methods. Rudolf Schenker (Wed Feb 10 1999 - 21:03:53 EET)
Re: Multiple feature solid model from reverse engineering Steve Farentinos (Wed Feb 10 1999 - 21:58:34 EET)
Chrome plating RP components lrwhitaker@mmm.com (Wed Feb 10 1999 - 22:15:30 EET)
RE: Chrome plating RP components Bruce (Wed Feb 10 1999 - 22:46:58 EET)
Zeneca info request Chuck Alexander (Wed Feb 10 1999 - 22:45:55 EET)
Re: Chrome plating RP components RoyJRATC@aol.com (Thu Feb 11 1999 - 00:05:05 EET)
Inventor Seeks Company to Commercialize Medical Patent ChathamRes@aol.com (Thu Feb 11 1999 - 00:46:57 EET)
Attachment for Inventor Seeks Company ChathamRes@aol.com (Thu Feb 11 1999 - 00:50:24 EET)
Parametric Pro E in Reverse Engineering Jarvela (Thu Feb 11 1999 - 01:50:05 EET)
Re: Inventor Seeks Company to Commercialize Medical Patent Rick Harrington (Thu Feb 11 1999 - 14:51:27 EET)
information Willy (Thu Feb 11 1999 - 15:00:18 EET)
Re: information Scott -Scooter- Sutterer (Thu Feb 11 1999 - 15:37:42 EET)
RE: information SWANK, WILLIAM E. (Thu Feb 11 1999 - 16:03:57 EET)
Tony Anderson (where are you?) MR ALBIN A HASTBACKA (Thu Feb 11 1999 - 14:35:50 EET)
Formus Halford, Ben (Thu Feb 11 1999 - 17:17:23 EET)
RE: Formus Holmquest, Jennifer A (Thu Feb 11 1999 - 17:54:33 EET)
Solid model from CMM for reverse engineering Shang Xiao (Thu Feb 11 1999 - 17:46:09 EET)
RE: Chrome plating RP components Jeff McBride (Thu Feb 11 1999 - 18:18:08 EET)
die cast zinc prototypes Bruce (Thu Feb 11 1999 - 18:29:11 EET)
Scanning Pte7233@aol.com (Thu Feb 11 1999 - 20:26:18 EET)
.010 slice for sla 500 Speer, Robert J. (Thu Feb 11 1999 - 20:45:49 EET)
Re: die cast zinc prototypes Tom Richards (Thu Feb 11 1999 - 23:51:40 EET)
Re: .010 slice for sla 500 Joe Allison (Thu Feb 11 1999 - 23:17:07 EET)
Scanning Pte7233@aol.com (Fri Feb 12 1999 - 00:12:33 EET)
SLA Operator Bobby Bishop (Fri Feb 12 1999 - 01:01:10 EET)
RE: Chrome plating RP components B. J. Arnold-Feret (Fri Feb 12 1999 - 01:09:05 EET)
Re: die cast zinc prototypes Fusioneng@aol.com (Fri Feb 12 1999 - 06:45:31 EET)
Re: Scanning Fusioneng@aol.com (Fri Feb 12 1999 - 06:52:06 EET)
RE: Zeneca info request Popat Ajay AH (Fri Feb 12 1999 - 12:54:00 EET)
Re: Scanning Tom Richards (Fri Feb 12 1999 - 20:44:55 EET)
Looking for Xiaorong Xu or colleagues from MIT Neil Hopkinson (Fri Feb 12 1999 - 17:44:05 EET)
Conference Announcement: uRapid '99 Ulrich Clemens (Fri Feb 12 1999 - 18:01:31 EET)
Zeneca info request - Thank You Chuck Alexander (Fri Feb 12 1999 - 18:05:45 EET)
Scansite update dbassett (Fri Feb 12 1999 - 18:31:31 EET)
CHECK THIS OUT! michael rees (Fri Feb 12 1999 - 18:31:59 EET)
Looking for Plating help Impact - Doug Johnson (Fri Feb 12 1999 - 19:05:06 EET)
Free High Rez. Digital Human model from Scanned data Venkat Krishnamurthy (Fri Feb 12 1999 - 19:15:06 EET)
SLA Operator fax number correction TBush (Fri Feb 12 1999 - 19:30:23 EET)
University Research Participation Wanted Joe Allison (Fri Feb 12 1999 - 19:29:55 EET)
Free models, poser michael rees (Fri Feb 12 1999 - 19:40:03 EET)
Re: Conference Announcement: uRapid '99 Alain BERNARD (Fri Feb 12 1999 - 20:02:05 EET)
Injection Molding Training Workshop Meghan Wolf (Fri Feb 12 1999 - 22:58:17 EET)
Human brain needed Christian_Nelson/DTM@dtm-corp.com (Fri Feb 12 1999 - 23:01:09 EET)
Motorola Patent EDM Electrodes Mark Bannister (Sat Feb 13 1999 - 00:38:55 EET)
RE: Motorola Patent EDM Electrodes Bruce (Fri Feb 12 1999 - 23:53:50 EET)
Re: Human brain needed RoyJRATC@aol.com (Sat Feb 13 1999 - 00:05:23 EET)
"Eiffel Tower" Glenn Rhoades (Sat Feb 13 1999 - 01:22:48 EET)
Off-topic Friday funnies-aircraft related Monica & Glenn Whiteside (Sat Feb 13 1999 - 02:03:37 EET)
Re: Free models, poser ATiburon@aol.com (Sat Feb 13 1999 - 05:06:03 EET)
Definitive Medical and Biomed Applications ~ Clearsight Strategy ~ (Sat Feb 13 1999 - 16:51:13 EET)
Re: Conference Announcement: uRapid '99 Ulrich Clemens (Sat Feb 13 1999 - 18:46:01 EET)
Re: CHECK THIS OUT! Marshall Burns (Sat Feb 13 1999 - 18:54:36 EET)
Re: CHECK THIS OUT! michael rees (Sat Feb 13 1999 - 19:01:43 EET)
Re: CHECK THIS OUT! Steven (Sat Feb 13 1999 - 23:13:25 EET)
Re: Pure copper bars Tom Richards (Sun Feb 14 1999 - 17:47:45 EET)
primer long time (Mon Feb 15 1999 - 07:53:57 EET)
Re: primer Paul J. Burr (Fri Jan 15 1999 - 14:28:18 EET)
SLA7000 test result at Incs(Japan) igata tetsuzo (Mon Feb 15 1999 - 14:51:24 EET)
Re: primer Wade Williams (Mon Feb 15 1999 - 18:15:04 EET)
SLA7000 Paul Scheible (Mon Feb 15 1999 - 15:43:43 EET)
Re: "Eiffel Tower" Alain BERNARD (Mon Feb 15 1999 - 16:01:19 EET)
Re: Your posting to rp-ml Alain BERNARD (Mon Feb 15 1999 - 16:09:23 EET)
.010 slice Speer, Robert J. (Mon Feb 15 1999 - 18:25:59 EET)
Re: SLA7000 test result at Incs(Japan) Steve Stewart (Mon Feb 15 1999 - 19:32:24 EET)
.010 slice Speer, Robert J. (Mon Feb 15 1999 - 19:43:25 EET)
RE: .010 slice Timmel, Ingrid (Mon Feb 15 1999 - 20:02:44 EET)
[Fwd: long Re: CHECK THIS OUT!] Steven Pollack (Mon Feb 15 1999 - 21:09:12 EET)
[Fwd: long Re: CHECK THIS OUT!] Steven Pollack (Mon Feb 15 1999 - 21:09:43 EET)
[Fwd: long Re: CHECK THIS OUT!] Steven Pollack (Mon Feb 15 1999 - 21:09:27 EET)
[Fwd: long Re: CHECK THIS OUT!] Steven Pollack (Mon Feb 15 1999 - 21:10:47 EET)
[Fwd: long Re: CHECK THIS OUT!] Steven Pollack (Mon Feb 15 1999 - 21:08:11 EET)
[Fwd: long Re: CHECK THIS OUT!] Steven Pollack (Mon Feb 15 1999 - 21:08:56 EET)
[Fwd: long Re: CHECK THIS OUT!] Steven Pollack (Mon Feb 15 1999 - 21:10:09 EET)
[Fwd: long Re: CHECK THIS OUT!] Steven Pollack (Mon Feb 15 1999 - 21:10:29 EET)
[Fwd: CHECK THIS!] Steven Pollack (Mon Feb 15 1999 - 21:09:59 EET)
A new Magazine...RP SHOPPER? Elaine Hunt (Mon Feb 15 1999 - 22:19:19 EET)
thermojet solid object printer Elaine Hunt (Mon Feb 15 1999 - 22:37:44 EET)
Press Release - 3D Keltool Brad Fox (Tue Feb 16 1999 - 00:17:23 EET)
Re: [Fwd: long Re: CHECK THIS OUT!] Catherine Minich (Tue Feb 16 1999 - 01:02:40 EET)
Re: CHECK THIS OUT! lblasch@opw-fc.com (Mon Feb 15 1999 - 18:08:41 EET)
RE: CHECK THIS OUT! Monica & Glenn Whiteside (Tue Feb 16 1999 - 03:46:27 EET)
SGI NT Workstations jjrapid@netcomuk.co.uk (Tue Feb 16 1999 - 13:55:33 EET)
Concept Modelers Peter Rourke (Tue Feb 16 1999 - 14:32:47 EET)
universities and RP Elaine Hunt (Tue Feb 16 1999 - 14:56:59 EET)
Co-op RT Marketing Program Joe Frantz (Tue Feb 16 1999 - 16:16:16 EET)
Re: Press Release - 3D Keltool MR ALBIN A HASTBACKA (Tue Feb 16 1999 - 14:25:36 EET)
Re: SGI NT Workstations Dan Sammons (Tue Feb 16 1999 - 17:13:36 EET)
Re: universities and RP Anshuman Razdan (Tue Feb 16 1999 - 17:29:30 EET)
Re: Co-op RT Marketing Program Nick Osborn (Tue Feb 16 1999 - 17:32:35 EET)
Re: SGI NT Workstations Fusioneng@aol.com (Tue Feb 16 1999 - 17:58:25 EET)
Re: universities and RP cthomas@eng.utah.edu (Tue Feb 16 1999 - 19:38:34 EET)
DTM build temp or? Miller, Michael W (Tue Feb 16 1999 - 21:01:27 EET)
Re: CHECK THIS OUT! Brock Hinzmann (Tue Feb 16 1999 - 21:45:18 EET)
Light Year / Build Time Estimator? Scott -Scooter- Sutterer (Tue Feb 16 1999 - 22:27:27 EET)
Rapid Prototyping Patents Special Edition ChathamRes@aol.com (Tue Feb 16 1999 - 23:10:30 EET)
3D Keltool Thomas Trenary (Tue Feb 16 1999 - 23:34:08 EET)
Re: long Re: CHECK THIS OUT! michael rees (Tue Feb 16 1999 - 23:47:15 EET)
Re: CHECK THIS OUT! Steven (Tue Feb 16 1999 - 23:57:06 EET)
3D RP Patents Special Edition ChathamRes@aol.com (Wed Feb 17 1999 - 00:12:30 EET)
Mathematics Software and stl files j.chertok@mail.utexas.edu (Wed Feb 17 1999 - 05:04:03 EET)
RE: Mathematics Software and stl files michael rees (Wed Feb 17 1999 - 05:49:44 EET)
(no subject) Rapid Dude (Wed Feb 17 1999 - 07:43:26 EET)
Off-topic, Friday funnies a few days early... Monica & Glenn Whiteside (Wed Feb 17 1999 - 08:11:47 EET)
(no subject) razdan (Wed Feb 17 1999 - 08:05:40 EET)
Re: your mail Mr. Tushar R. Mahale (Wed Feb 17 1999 - 09:34:33 EET)
Coefficient of friction of SL parts Neil Hopkinson (Wed Feb 17 1999 - 14:05:06 EET)
Looking for Vat for SLA 500 Bruce (Wed Feb 17 1999 - 16:11:59 EET)
Re: Off-topic, Friday funnies a few days early... Steve Stewart (Wed Feb 17 1999 - 16:21:31 EET)
Re: Mathematics Software and stl files Marshall Burns (Wed Feb 17 1999 - 16:30:17 EET)
Looking for Koji Ikuta Terry Feeley (Wed Feb 17 1999 - 19:05:01 EET)
Texture michael rees (Wed Feb 17 1999 - 19:59:36 EET)
RP bureaus in the St. Louis area michael rees (Wed Feb 17 1999 - 20:51:52 EET)
Re: RP bureaus in the St. Louis area Allen Graff (Thu Feb 18 1999 - 00:19:56 EET)
IMMEDIATE JOB OPENINGS Joe Allison (Thu Feb 18 1999 - 00:32:39 EET)
Re: RP bureaus in the St. Louis area Rick Harrington (Thu Feb 18 1999 - 01:24:20 EET)
RP Conference. Md Haider-E-Alahi (Thu Feb 18 1999 - 10:36:56 EET)
Looking for Koji Ikuta microtec (Thu Feb 18 1999 - 11:28:23 EET)
CNC versus Rapid Tooling from RP stephen.windsor@roverpte.demon.co.uk (Thu Feb 18 1999 - 11:31:58 EET)
Re: CNC versus Rapid Tooling from RP Delft Spline Systems (Thu Feb 18 1999 - 13:06:27 EET)
RE: CNC versus Rapid Tooling from RP Bauer Juergen (Thu Feb 18 1999 - 13:18:59 EET)
Re: RP Conference. Douglas A. VanPutte (Thu Feb 18 1999 - 15:09:36 EET)
Is the new thermojet system true, you ask Elaine Hunt (Thu Feb 18 1999 - 15:16:20 EET)
Re: RP Conference. David Bourell (Thu Feb 18 1999 - 14:21:17 EET)
Re: CNC versus Rapid Tooling from RP Fusioneng@aol.com (Thu Feb 18 1999 - 17:20:09 EET)
RE: CNC versus Rapid Tooling from RP j.Gunnink@ind.tno.nl (Thu Feb 18 1999 - 17:45:56 EET)
RP For Windtunnel/Aerodynamic Mnr. D de Beer (Fri Feb 19 1999 - 07:23:24 EET)
(no subject) Puneet Tandon (Fri Feb 19 1999 - 15:45:00 EET)
Re: CNC versus Rapid Tooling from RP Ray Brandes (Fri Feb 19 1999 - 14:10:27 EET)
Warren Hill? Steve Hengsperger (Fri Feb 19 1999 - 17:00:06 EET)
Request for information Marco Voster (Fri Feb 19 1999 - 16:58:35 EET)
Contacting Plynetics Bob Zajeski (Fri Feb 19 1999 - 17:43:31 EET)
Re: Request for information Wayne L Foss (Fri Feb 19 1999 - 17:29:47 EET)
Re: Request for information RP List (Fri Feb 19 1999 - 18:18:06 EET)
RE: RP For Windtunnel/Aerodynamic Miller, Michael W (Fri Feb 19 1999 - 18:36:03 EET)
RE: Request for information Rodrigo Pedron (Fri Feb 19 1999 - 19:32:42 EET)
SLS of metals Chris Sutcliffe (Fri Feb 19 1999 - 19:45:14 EET)
RP versus CNC MR ALBIN A HASTBACKA (Fri Feb 19 1999 - 18:56:37 EET)
RTV molds with SL5410 jesalhus1@mmm.com (Fri Feb 19 1999 - 21:20:39 EET)
Re: RP versus CNC Tom Richards (Sat Feb 20 1999 - 00:45:13 EET)
Fwd: RP versus CNC Elaine Hunt (Fri Feb 19 1999 - 22:03:41 EET)
Number of SLA's Gabe Clark (Fri Feb 19 1999 - 22:48:25 EET)
Off Topic, Friday Humor Brandon Jacobsen (Fri Feb 19 1999 - 23:23:30 EET)
RE: The rose Jim Rollins (Fri Feb 19 1999 - 23:38:40 EET)
RP Conference. Md Haider-E-Alahi (Sat Feb 20 1999 - 12:55:22 EET)
Warren Hill Andrew Chantrill (Sat Feb 20 1999 - 13:49:05 EET)
Number of SLA's Terry T. Wohlers (Sat Feb 20 1999 - 17:29:13 EET)
Re: Number of SLA's ATiburon@aol.com (Sat Feb 20 1999 - 20:30:33 EET)
Off-topic Saturday humor Monica & Glenn Whiteside (Sun Feb 21 1999 - 01:49:34 EET)
Request Tom Richards (Sun Feb 21 1999 - 04:04:12 EET)
RP versus CNC Prof P M Dickens (Sun Feb 21 1999 - 13:18:24 EET)
Future uses of RP? RE: Civilian Astronauts progress report # 19 L7, RP use in Space? Monica & Glenn Whiteside (Mon Feb 22 1999 - 01:45:59 EET)
Slow speed light and possible RP laser control implications? Monica & Glenn Whiteside (Mon Feb 22 1999 - 02:31:37 EET)
RE: RTV molds with SL5410 DANIEL CHARLES DAVIS (Mon Feb 22 1999 - 02:49:47 EET)
Re: Fwd: RP versus CNC Tom Mueller (Mon Feb 22 1999 - 06:46:29 EET)
Re: Future uses of RP? RE: Civilian Astronauts progress report # 19 L7, RP use in Space? Marshall Burns (Mon Feb 22 1999 - 07:59:57 EET)
RE: RP versus CNC j.Gunnink@ind.tno.nl (Mon Feb 22 1999 - 10:38:08 EET)
Re: Slow speed light and possible RP laser control implications? B. O'Neill (Mon Feb 22 1999 - 11:16:37 EET)
RE: RP versus CNC DANIEL CHARLES DAVIS (Mon Feb 22 1999 - 12:21:56 EET)
Measuring a RP-testpart j.Gunnink@ind.tno.nl (Mon Feb 22 1999 - 12:46:57 EET)
SLA-500 Laser problem TAN CHOR ANN, RP (Mon Feb 22 1999 - 12:56:25 EET)
Re: RP For Windtunnel/Aerodynamic Nick Osborn (Mon Feb 22 1999 - 13:47:31 EET)
Re: RTV molds with SL5410 Ray Brandes (Mon Feb 22 1999 - 14:37:18 EET)
Fwd: RE: RP versus CNC Elaine Hunt (Mon Feb 22 1999 - 14:54:06 EET)
user part and FTP site update Elaine Hunt (Mon Feb 22 1999 - 15:54:59 EET)
Open time on Sinterstation Ray Brandes (Mon Feb 22 1999 - 17:14:43 EET)
Plastic Properties Sadegh Rahmati (Mon Feb 22 1999 - 17:40:23 EET)
Re: Request cthomas@eng.utah.edu (Mon Feb 22 1999 - 17:54:13 EET)
ONELINE ORDER FOR DIGITAL SCULPTURE Christian LAVIGNE (Mon Feb 22 1999 - 18:37:22 EET)
Re: Open time on Sinterstation Bradley VanDike (Mon Feb 22 1999 - 18:51:21 EET)
Re: Open time on Sinterstation harvest@harvest-tech.com (Mon Feb 22 1999 - 13:18:27 EET)
Shapemaker II ? Chad L Buchanan (Mon Feb 22 1999 - 19:15:02 EET)
RE: Slow speed light and possible RP laser control implications? Miller, Michael W (Mon Feb 22 1999 - 19:16:47 EET)
Re: SLA-500 Laser problem ERIC KING (Mon Feb 22 1999 - 21:02:41 EET)
Re: Shapemaker II ? cthomas@eng.utah.edu (Mon Feb 22 1999 - 21:07:43 EET)
Re: Open time on Sinterstation Ray Brandes (Mon Feb 22 1999 - 21:57:12 EET)
Re: Number of SLA's Terry T. Wohlers (Tue Feb 23 1999 - 05:20:30 EET)
Another SLA-500 Laser problem TAN CHOR ANN, RP (Tue Feb 23 1999 - 05:53:02 EET)
RE: Another SLA-500 Laser problem Deak, Steve (Tue Feb 23 1999 - 06:52:20 EET)
SLC file ? Florent Salako (Tue Feb 23 1999 - 07:12:02 EET)
Re: Open time on Sinterstation Rapid Dude (Tue Feb 23 1999 - 07:45:07 EET)
RP modeling of food/medicine products Monica & Glenn Whiteside (Tue Feb 23 1999 - 07:52:37 EET)
Re: Open time on Sinterstation Fusioneng@aol.com (Tue Feb 23 1999 - 08:37:31 EET)
Re: RP modeling of food/medicine products Raymond Lee (Tue Feb 23 1999 - 09:23:14 EET)
(no subject) Vern Carter (Thu Feb 18 1999 - 23:26:39 EET)
Cost justification of RP Rice Cabiac (Fri Feb 19 1999 - 03:35:32 EET)
How about the sales of rp unit shirong@oita-ri.go.jp (Fri Feb 19 1999 - 03:18:27 EET)
OT Yakov Horenstein (Fri Feb 19 1999 - 00:24:25 EET)
Cost justification of RP Rice Cabiac (Thu Feb 18 1999 - 22:39:46 EET)
SLC file ? Florent Salako (Thu Feb 18 1999 - 21:10:34 EET)
RE: CNC versus Rapid Tooling from RP Tim Plunkett (Thu Feb 18 1999 - 20:19:07 EET)
Aluminium Molds Pedro Gago (Tue Feb 23 1999 - 13:11:07 EET)
Ch-ch-changes in the RP world DanF@aol.com (Tue Feb 23 1999 - 13:39:35 EET)
Aluminium Molds Pedro Gago (Tue Feb 23 1999 - 13:41:10 EET)
(no subject) Andrzejewski, Jan (Tue Feb 23 1999 - 14:59:05 EET)
Re: Ch-ch-changes in the RP world jjrapid@netcomuk.co.uk (Tue Feb 23 1999 - 15:06:26 EET)
Re: Number of SLA's Terry T. Wohlers (Tue Feb 23 1999 - 15:18:46 EET)
Re: Todd Reese (Tue Feb 23 1999 - 15:52:46 EET)
Re: RP modeling of food/medicine products Todd Reese (Tue Feb 23 1999 - 15:57:41 EET)
can RP make the following? Elaine Hunt (Tue Feb 23 1999 - 15:45:01 EET)
RE: user part and FTP site update Bauer Juergen (Tue Feb 23 1999 - 16:10:57 EET)
Re: RP modeling of food/medicine products Ron Clemons (Tue Feb 23 1999 - 10:17:23 EET)
Re: Marshall Burns (Tue Feb 23 1999 - 16:22:01 EET)
please subscibe me to the mailinglist b.Kooijmans@ind.tno.nl (Tue Feb 23 1999 - 17:13:10 EET)
Re: SLC file ? Wayne L Foss (Tue Feb 23 1999 - 17:19:21 EET)
Informations on 2D standards for RP Caporusso Pier VIto (Tue Feb 23 1999 - 17:26:14 EET)
RE: RP modeling of food/medicine products Haut, Rob - GCP (Tue Feb 23 1999 - 17:26:41 EET)
Re[2]: RP modeling of food/medicine products ralott@mail.hac.com (Tue Feb 23 1999 - 17:17:58 EET)
mustang Brant, Jeff E. (Tue Feb 23 1999 - 18:10:00 EET)
RE: RP modeling of food/medicine products Bauer Juergen (Tue Feb 23 1999 - 18:17:31 EET)
RP modeling of food/medicine products Terry T. Wohlers (Tue Feb 23 1999 - 18:16:58 EET)
Re: RP modeling of food/medicine products DanF@aol.com (Tue Feb 23 1999 - 18:29:10 EET)
Re: SLC file ? Wayne L Foss (Tue Feb 23 1999 - 18:42:36 EET)
Re: Cost justification of RP Robert Crangle (Tue Feb 23 1999 - 18:51:54 EET)
Re: RP modeling of food/medicine products Martin Koch (Tue Feb 23 1999 - 18:55:05 EET)
Re: Informations on 2D standards for RP gautham@asu.edu (Tue Feb 23 1999 - 18:57:27 EET)
FW: mustang Brant, Jeff E. (Tue Feb 23 1999 - 19:01:09 EET)
RE: RP modeling of food/medicine products harvest@harvest-tech.com (Tue Feb 23 1999 - 12:37:29 EET)
Re: SLC file ? A.D.Bhatt (Tue Feb 23 1999 - 22:55:13 EET)
Re: SLC file ? Bradley VanDike (Tue Feb 23 1999 - 21:34:10 EET)
Re: RP modeling of food/medicine products Marshall Burns (Tue Feb 23 1999 - 21:47:30 EET)
RP modelling of food...chocolate baby Neuro Surgery (Tue Feb 23 1999 - 22:33:55 EET)
Re: RP modelling of food...chocolate baby Elaine Hunt (Tue Feb 23 1999 - 22:57:46 EET)
RE: RP modelling of food...chocolate baby Neuro Surgery (Tue Feb 23 1999 - 23:01:11 EET)
Need suggestions! Ola L.A. Harrysson (Tue Feb 23 1999 - 23:16:55 EET)
Re: RP modeling of food/medicine products Ron Clemons (Tue Feb 23 1999 - 17:01:39 EET)
Ed Garguilo's orginal user accuracy recipe Elaine Hunt (Tue Feb 23 1999 - 23:30:11 EET)
Re: RP modelling of food...chocolate baby harvest@harvest-tech.com (Tue Feb 23 1999 - 18:03:07 EET)
Re: Open time on Sinterstation jim@paramountind.com (Wed Feb 24 1999 - 00:08:28 EET)
RE: SLC file (long) DANIEL CHARLES DAVIS (Wed Feb 24 1999 - 02:53:59 EET)
Reverse Engineering (fwd) Rapid Dude (Wed Feb 24 1999 - 07:59:04 EET)
I need help Caporusso Pier VIto (Wed Feb 24 1999 - 10:09:11 EET)
http://www.bitpipe.com Yakov Horenstein (Wed Feb 24 1999 - 12:36:52 EET)
Backfilling Copper Polyamide mold inserts Rodrigo_B_Maria@multibras.com.br (Wed Feb 24 1999 - 13:49:33 EET)
Properties dependent on Wavelength? jeff smith (Wed Feb 24 1999 - 14:04:49 EET)
Re: Need suggestions! Ray Brandes (Wed Feb 24 1999 - 15:36:21 EET)
Re: SLC file (long) Irene Quinlan (Wed Feb 24 1999 - 15:54:54 EET)
binary STL format Nemeth Karoly MEE (Wed Feb 24 1999 - 16:05:58 EET)
FW: National Engineers Week Lori Hastie (Wed Feb 24 1999 - 16:41:58 EET)
Re: http://www.bitpipe.com Marshall Burns (Wed Feb 24 1999 - 16:55:03 EET)
A015:Future of CAD Steven Pollack (Wed Feb 24 1999 - 17:04:59 EET)
Proactive Finance Purchases 47.68% of Dtm Yakov Horenstein (Wed Feb 24 1999 - 15:28:07 EET)
RE: binary STL format Charles Knox (Wed Feb 24 1999 - 17:32:04 EET)
Solid Model construction lrwhitaker@mmm.com (Wed Feb 24 1999 - 17:50:55 EET)
Re: I need help Brandon R. Ferguson (Wed Feb 24 1999 - 17:51:03 EET)
Re: SLC file (long) Jim Klohr (Wed Feb 24 1999 - 18:43:16 EET)
Re: Solid Model construction Bob Zajeski (Wed Feb 24 1999 - 18:52:52 EET)
Re: I need help Jim Klohr (Wed Feb 24 1999 - 19:04:24 EET)
general questions b.Kooijmans@ind.tno.nl (Wed Feb 24 1999 - 19:09:37 EET)
Re: RP modeling of food/medicine products Brad Fox (Wed Feb 24 1999 - 19:23:31 EET)
Re: Cost justification of RP Brad Fox (Wed Feb 24 1999 - 19:31:55 EET)
Fwd: Re: Cost justification of RP Elaine Hunt (Wed Feb 24 1999 - 19:48:16 EET)
Direct AIM for wax injection Alta Precision (Wed Feb 24 1999 - 20:03:11 EET)
Re: A015:Future of CAD michael rees (Wed Feb 24 1999 - 21:20:43 EET)
Re: Fwd: Re: Cost justification of RP Brad Fox (Wed Feb 24 1999 - 21:25:42 EET)
Educational Opportunity: Screw and Barrel Technology for Injection Molding Pat Isham (Wed Feb 24 1999 - 22:34:16 EET)
Re: binary STL format Marshall Burns (Wed Feb 24 1999 - 22:29:18 EET)
RE: A015:Future of CAD Spielman, Roger L (Wed Feb 24 1999 - 23:08:55 EET)
RE: Fwd: Re: Cost justification of RP Brad Fox (Thu Feb 25 1999 - 01:22:31 EET)
ATTN: Ray Brandes on Linear Programming Monica & Glenn Whiteside (Thu Feb 25 1999 - 02:46:08 EET)
Re: Decline & bankruptcy Vern Carter (Sat Jan 16 1999 - 04:18:59 EET)
Reverse Engineering razdan (Thu Feb 25 1999 - 06:11:33 EET)
Fixed Problems with SL 5220 Chris Sutcliffe (Thu Feb 25 1999 - 12:35:59 EET)
progress? Elaine Hunt (Thu Feb 25 1999 - 14:44:47 EET)
Re: ATTN: Ray Brandes on Linear Programming Ray Brandes (Thu Feb 25 1999 - 14:48:54 EET)
Re: progress? B. J. Arnold-Feret (Thu Feb 25 1999 - 16:14:44 EET)
Re: progress? bvanhiel@nordson.com (Thu Feb 25 1999 - 16:51:32 EET)
Re: progress? Ogy and Marifel Mantaring (Thu Feb 25 1999 - 18:02:46 EET)
Re: progress? cthomas@eng.utah.edu (Thu Feb 25 1999 - 18:46:52 EET)
RE: progress? Spielman, Roger L (Thu Feb 25 1999 - 18:58:38 EET)
Re: progress? Foamcaster@aol.com (Thu Feb 25 1999 - 19:18:55 EET)
RE: Direct AIM for wax injection Tim Plunkett (Thu Feb 25 1999 - 14:03:27 EET)
Re: progress? Scott -Scooter- Sutterer (Thu Feb 25 1999 - 19:44:07 EET)
RE: progress? Holmquest, Jennifer A (Thu Feb 25 1999 - 19:58:10 EET)
Re: progress? lblasch@opw-fc.com (Thu Feb 25 1999 - 12:12:03 EET)
RE: progress? Miller, Michael W (Thu Feb 25 1999 - 20:25:48 EET)
RE: progress? Beth P Israelnaim (Thu Feb 25 1999 - 20:55:46 EET)
Re: RP tools can model human figures? michael rees (Thu Feb 25 1999 - 20:55:09 EET)
RE: progress? Ron Clemons (Thu Feb 25 1999 - 15:05:09 EET)
Yes, progress! ralott@mail.hac.com (Thu Feb 25 1999 - 21:06:59 EET)
RE: progress Hanna, Paul (Thu Feb 25 1999 - 21:15:51 EET)
RE ; Progress? Hanna, Paul (Thu Feb 25 1999 - 21:44:02 EET)
Re: RP tools can model human figures? Brad Fox (Fri Feb 26 1999 - 00:29:28 EET)
Re: progress? John Walmsley (Thu Feb 25 1999 - 20:20:55 EET)
academic sources of rp services Interpro Rapid Technologies (Fri Feb 26 1999 - 02:21:44 EET)
Rapid Chocolate and Fast-Food Christian LAVIGNE (Fri Feb 26 1999 - 06:45:48 EET)
vacuum cleaners Johannes Eschl (Fri Feb 26 1999 - 09:21:52 EET)
binary STL format - thanks Nemeth Karoly MEE (Fri Feb 26 1999 - 09:38:52 EET)
RE: RP modeling of medicine products Du Zhaohui (Dr) (Fri Feb 26 1999 - 09:38:55 EET)
Re: progress? Ray Brandes (Fri Feb 26 1999 - 14:04:20 EET)
Re: academic sources of rp services Steve Upcraft (Fri Feb 26 1999 - 13:57:55 EET)
academic vs SBs Elaine Hunt (Fri Feb 26 1999 - 15:12:10 EET)
Re: RP tools can model human figures? Bradley VanDike (Fri Feb 26 1999 - 16:37:24 EET)
Re: progress? B. J. Arnold-Feret (Fri Feb 26 1999 - 17:35:21 EET)
Re: RP tools can model human figures? / Edible RP Nick Osborn (Fri Feb 26 1999 - 20:20:49 EET)
3D scanners and digitizers Gary A. Fudge (Fri Feb 26 1999 - 21:00:23 EET)
Re: academic vs SBs Foamcaster@aol.com (Fri Feb 26 1999 - 21:31:00 EET)
human figure scanning dbassett (Fri Feb 26 1999 - 23:11:25 EET)
Fw: progress? Monica & Glenn Whiteside (Sat Feb 27 1999 - 01:37:53 EET)
Question : DICOM (CT file formation) Ryu, JaeHun (Fri Feb 27 1998 - 02:53:42 EET)
EPSON selects YARC RIP for new 9000 printer Jody Champion (Sat Feb 27 1999 - 04:22:03 EET)
Re: ATTN: Ray Brandes on Linear Programming Monica & Glenn Whiteside (Sat Feb 27 1999 - 07:50:43 EET)
Triangulation Algo A.D.Bhatt (Sat Feb 27 1999 - 20:26:02 EET)
RE: Question : DICOM (CT file formation) Justin Kidder (Sat Feb 27 1999 - 17:11:16 EET)
Re: Triangulation Algo aaroflex (Sat Feb 27 1999 - 17:58:21 EET)
Search for model/prototyping shops DanF@aol.com (Sat Feb 27 1999 - 21:24:50 EET)
Re: Triangulation Algo Gill Barequet (Sat Feb 27 1999 - 23:36:12 EET)
Re: progress? Yakov Horenstein (Sun Feb 28 1999 - 16:34:42 EET)
tomography to stl files mamorini@cybergal.com (Sun Feb 28 1999 - 19:49:12 EET)
Re: Search for model/prototyping shops Monica & Glenn Whiteside (Sun Feb 28 1999 - 22:47:35 EET)
900+ search engines and directories only 9.95 prt4392@yahoo.com (Sun Feb 28 1999 - 09:56:45 EET)
RE: Edible RP DANIEL CHARLES DAVIS (Mon Mar 01 1999 - 03:39:50 EET)
New Address thoms@naisp.net (Mon Mar 01 1999 - 03:46:57 EET)
Year 2000 Government Report and Information michael rees (Mon Mar 01 1999 - 06:01:03 EET)
Drawing File with .CGS Extension APDAP (Mon Mar 01 1999 - 11:14:58 EET)
RE: Drawing File with .CGS Extension DANIEL CHARLES DAVIS (Mon Mar 01 1999 - 12:35:07 EET)
RE: Search for model/prototyping shops philip.price@roverpte.demon.co.uk (Mon Mar 01 1999 - 13:44:30 EET)
Fwd: Re: academic vs SBs Elaine Hunt (Mon Mar 01 1999 - 15:49:55 EET)
Another Regulation????? Pte7233@aol.com (Mon Mar 01 1999 - 16:05:48 EET)
Re: academic vs SBs harvest@harvest-tech.com (Mon Mar 01 1999 - 10:38:40 EET)
Re: Search for model/prototyping shops bmacier@andisco.com (Mon Mar 01 1999 - 16:49:43 EET)
RE: Another Regulation????? Brent Stucker (Mon Mar 01 1999 - 17:08:27 EET)
Re: Another Regulation????? Jamie Ledin (Mon Mar 01 1999 - 17:48:39 EET)
Re: Search for model/prototyping shops Carol Farrish (Mon Mar 01 1999 - 18:51:06 EET)
FW: Another Regulation????? Denton, Karl R. KD1588 (Mon Mar 01 1999 - 21:25:00 EET)
Conductive Coating of SLA Process Ron Hollis (Mon Mar 01 1999 - 20:54:53 EET)
Information wanted yogesh b. kulkarni (Mon Mar 01 1999 - 19:18:46 EET)
Year 2000 link michael rees (Mon Mar 01 1999 - 19:42:56 EET)
Correction Tom Richards (Mon Mar 01 1999 - 23:42:49 EET)
RE: tomography to stl files Jim Rollins (Mon Mar 01 1999 - 21:54:32 EET)
Re: academic vs SBs Foamcaster@aol.com (Mon Mar 01 1999 - 22:00:21 EET)
Re: ATTN: Ray Brandes on Linear Programming Ray Brandes (Mon Mar 01 1999 - 22:21:10 EET)
Very small details Wayne L Foss (Tue Mar 02 1999 - 00:18:59 EET)
RE: tomography to stl files Mark Bliek (Sun Feb 28 1999 - 22:37:20 EET)
Re: ATTN: Ray Brandes on Linear Programming Monica & Glenn Whiteside (Tue Mar 02 1999 - 01:42:14 EET)
LDI Machine DANIEL CHARLES DAVIS (Tue Mar 02 1999 - 03:21:09 EET)
Re: FW: Another Regulation????? ATiburon@aol.com (Tue Mar 02 1999 - 04:26:30 EET)
Re: Search for model/prototyping shops DanF@aol.com (Tue Mar 02 1999 - 08:11:15 EET)
3D CAD Seats? DANIEL CHARLES DAVIS (Tue Mar 02 1999 - 08:37:28 EET)
Re: 3D CAD Seats? Hamish Hawthorn (Tue Mar 02 1999 - 09:40:50 EET)
Re: RE: Edible RP Nick Osborn (Tue Mar 02 1999 - 10:13:30 EET)
Software Gives Doctors 3-D View Marshall Burns (Tue Mar 02 1999 - 10:07:48 EET)
3D Systems Tooling Engineer Opening in Hong Kong Dockstader, Lee (Tue Mar 02 1999 - 12:11:32 EET)
Historical note on StL format Marshall Burns (Tue Mar 02 1999 - 14:06:24 EET)
RE: Very small details graham.tromans@roverpte.demon.co.uk (Tue Mar 02 1999 - 13:16:25 EET)
Eosint Service Bureau Elaine Hunt (Tue Mar 02 1999 - 14:49:08 EET)
Looking for Tom Greaves, TCT Annual Directory Mark Littlewood (Tue Mar 02 1999 - 16:01:47 EET)
multiple investment casting waxes from soft tooling RP Solutions (Tue Mar 02 1999 - 16:06:21 EET)
FW: FW: Another Regulation????? Denton, Karl R. KD1588 (Tue Mar 02 1999 - 19:19:00 EET)
Re: Very small details Brad Fox (Tue Mar 02 1999 - 17:07:15 EET)
RE: Info on 3D scanners and digitizers Brian Kissel (Tue Mar 02 1999 - 17:21:11 EET)
Re: Conductive Coating of SLA Process bo yang me stnt (Tue Mar 02 1999 - 17:32:18 EET)
Re: Another Regulation????? Craig S. Whitaker (Tue Mar 02 1999 - 17:50:01 EET)
Re: Software Gives Doctors 3-D View Justin R. Kidder (Tue Mar 02 1999 - 18:03:14 EET)
please unscribe...eom Ben Piper (Tue Mar 02 1999 - 18:06:41 EET)
RE: Eosint Service Bureau graham.tromans@roverpte.demon.co.uk (Tue Mar 02 1999 - 17:16:53 EET)
Re: Eosint Service Bureau Alain BERNARD (Tue Mar 02 1999 - 21:03:20 EET)
Alan Greenspan on Technology, university, and Industry Steven (Tue Mar 02 1999 - 21:54:49 EET)
Re: 3D Keltool Brad Fox (Tue Mar 02 1999 - 23:08:37 EET)
Re: Very small details aaroflex (Wed Mar 03 1999 - 00:20:52 EET)
RE: Very small details Chad L Buchanan (Tue Mar 02 1999 - 22:30:32 EET)
Greenspan Speech Steven (Wed Mar 03 1999 - 01:02:13 EET)
SLA500 laser TAN CHOR ANN, RP (Wed Mar 03 1999 - 07:01:47 EET)
ISO and Quotation Procedure Marlene Mendoza (Wed Mar 03 1999 - 10:14:13 EET)
ISO and Quotation Procedure Marlene Mendoza (Wed Mar 03 1999 - 10:11:15 EET)
Eosint Service Bureau Julia McDonald (Wed Mar 03 1999 - 11:51:50 EET)
Request for info IAN CAMPBELL (Wed Mar 03 1999 - 12:12:26 EET)
RE: ISO and Quotation Procedure philip.price@roverpte.demon.co.uk (Wed Mar 03 1999 - 13:02:41 EET)
Re: Eosint Service Bureau Marshall Burns (Wed Mar 03 1999 - 14:50:08 EET)
Re: Very small details Britt Ferrill (Wed Mar 03 1999 - 15:03:17 EET)
RE: Attached messages trevor.howarth@roverpte.demon.co.uk (Wed Mar 03 1999 - 15:46:26 EET)
Surface finishing Vincent Chin (Thu Mar 04 1999 - 08:44:34 EET)
Agenda for 1999 3DSNASUG Meeting? Steve Stewart (Wed Mar 03 1999 - 16:59:58 EET)
RE: Attached messages kevan_jones@cemcom.com (Wed Mar 03 1999 - 17:30:55 EET)
Call for speakers on "Advanced Metal Fabrication Processes" Marina Shara (Wed Mar 03 1999 - 19:39:28 EET)
Need consumer products companies to talk to Warner Babcock (Wed Mar 03 1999 - 19:20:29 EET)
Re: Attached messages Robert Crangle (Wed Mar 03 1999 - 19:38:48 EET)
If you are you looking to improve your injection molding efficiency and cut costs, you can't afford to miss this event! Marina Shara (Wed Mar 03 1999 - 21:06:06 EET)
Attend an injection molding course alongside EASTEC and walk the EASTEC exhibits!!! Marina Shara (Wed Mar 03 1999 - 22:57:32 EET)
Plating Evans, Paul (Wed Mar 03 1999 - 23:05:38 EET)
info Dennis R. Coonrad (Thu Mar 04 1999 - 01:10:51 EET)
Re: Plating Rod Ward (Wed Mar 03 1999 - 22:25:20 EET)
1999 3DNASUG Conference Discount Airfare Guy.Bourdeau@coulter.com (Wed Mar 03 1999 - 23:33:49 EET)
Suppliers Out Of Business? Dennis R. Coonrad (Thu Mar 04 1999 - 01:44:14 EET)
ShapeGrabber by Vitana DANIEL CHARLES DAVIS (Thu Mar 04 1999 - 02:37:16 EET)
Re: Historical note on StL format Joe Allison (Thu Mar 04 1999 - 02:30:24 EET)
CT to STL files - thanks!! mamorini@cybergal.com (Thu Mar 04 1999 - 08:51:07 EET)
Re: Archaic Web Site Alert Chris Holden (Thu Mar 04 1999 - 06:11:49 EET)
Where is Matt Cantwell? Chuck Alexander (Thu Mar 04 1999 - 04:32:32 EET)
RE: tomography to stl files image3 (Thu Mar 04 1999 - 04:17:58 EET)
New Web Site lonepeak (Thu Mar 04 1999 - 03:16:33 EET)
Archaic Web Site Alert lonepeak (Thu Mar 04 1999 - 04:18:02 EET)
Portal for Mechanical Designers Yakov Horenstein (Thu Mar 04 1999 - 11:43:03 EET)
Attachments philip.price@roverpte.demon.co.uk (Thu Mar 04 1999 - 12:08:52 EET)
Tool path of Sanders Sonny,H., Zhang (Thu Mar 04 1999 - 14:03:19 EET)
Re: Attachments Delft Spline Systems (Thu Mar 04 1999 - 14:36:11 EET)
Re: Attachments Wayne L Foss (Thu Mar 04 1999 - 15:41:52 EET)
think3 Makes Learning 3-D Easy Yakov Horenstein (Thu Mar 04 1999 - 16:26:32 EET)
Re: Attachments james mason (Thu Mar 04 1999 - 16:13:54 EET)
Ramco Cleaning station MK36/WRU Ralf Deuke (Thu Mar 04 1999 - 17:42:15 EET)
Re: CT to STL files - thanks!! Marshall Burns (Thu Mar 04 1999 - 16:55:09 EET)
Looking for a Service Bureau Chuck Wood (Thu Mar 04 1999 - 17:24:04 EET)
Re: CHECK THIS OUT! Marshall Burns (Thu Mar 04 1999 - 17:53:04 EET)
Re: Suppliers Out Of Business? Paul J. Burr (Thu Mar 04 1999 - 18:43:58 EET)
RE: tomography to stl files Brian Kissel (Thu Mar 04 1999 - 19:13:03 EET)
Re: CT to STL files - thanks!! A.D.Bhatt (Thu Mar 04 1999 - 22:45:53 EET)
Re: Looking for a Service Bureau harvest@harvest-tech.com (Thu Mar 04 1999 - 13:33:46 EET)
RE: Ramco Cleaning station MK36/WRU Deak, Steve (Thu Mar 04 1999 - 17:58:37 EET)
Re: Very small details aaroflex (Thu Mar 04 1999 - 21:38:49 EET)
Virus alert Geoff Smith-Moritz (Thu Mar 04 1999 - 22:24:06 EET)
Request for minimum wall thickness quotation Marshall Burns (Thu Mar 04 1999 - 22:30:03 EET)
Suppliers Out Of Business? Dennis R. Coonrad (Fri Mar 05 1999 - 00:32:55 EET)
Surface Inspection Equipment Todd Speechley (Fri Mar 05 1999 - 18:30:17 EET)
Re: Parts Tom Richards (Fri Mar 05 1999 - 02:36:09 EET)
Info on Happy99.exe kevan_jones@cemcom.com (Thu Mar 04 1999 - 23:46:20 EET)
happy99.exe fix Todd Reese (Fri Mar 05 1999 - 00:02:40 EET)
Re: Suppliers Out Of Business? Mike Vincek (Fri Mar 05 1999 - 00:41:51 EET)
Problem With 250/50 francois (Sat Mar 06 1999 - 02:30:25 EET)
(no subject) hangfung (Sat Nov 07 1998 - 11:19:35 EET)
Low melting aluminium. pgubb@howmet.com (Fri Mar 05 1999 - 15:45:56 EET)
RP related publications Nemeth Karoly MEE (Fri Mar 05 1999 - 12:41:06 EET)
Laser Sintering of Ceramics Extends Rapid Prototying Allan.Rennie (Fri Mar 05 1999 - 14:36:22 EET)
riddle for Friday's enjoyment Elaine Hunt (Fri Mar 05 1999 - 14:52:49 EET)
Re: RP related publications Stephen Rock (Fri Mar 05 1999 - 15:02:54 EET)
Re: riddle for Friday's enjoyment Neil Hopkinson (Fri Mar 05 1999 - 15:40:39 EET)
Info on CGI Tech Rick Harrington (Fri Mar 05 1999 - 17:20:07 EET)
Off-topic: More Riddles for Friday!! Monica & Glenn Whiteside (Fri Mar 05 1999 - 17:23:29 EET)
Off Topic - Friday funnies John Male (Fri Mar 05 1999 - 17:50:59 EET)
RE: Info on CGI Tech Brian Kissel (Fri Mar 05 1999 - 18:20:44 EET)
RE: Info on CGI Tech Cota, Vesna (Fri Mar 05 1999 - 18:33:17 EET)
RE: Miller, Michael W (Fri Mar 05 1999 - 18:30:45 EET)
Very Small Parts Wayne L Foss (Fri Mar 05 1999 - 18:37:13 EET)
Re: riddle for Friday's enjoyment Mark Wynn (Fri Mar 05 1999 - 18:35:19 EET)
Customer request Paul Lasman (Fri Mar 05 1999 - 19:46:01 EET)
JOB OPENINGS- MGI-BOSTON.MA Timmorr507@aol.com (Fri Mar 05 1999 - 22:00:10 EET)
Friday frolic Yakov Horenstein (Fri Mar 05 1999 - 23:27:38 EET)
Plynetics Express in San Leandro, California rsasaki@meridian-data.com (Sat Mar 06 1999 - 00:28:45 EET)
Re: Customer request shilohmotion@home.com (Sat Mar 06 1999 - 11:26:08 EET)
How lasers could print ads on food by way of Yakov Horenstein (Sat Mar 06 1999 - 16:37:52 EET)
Stratasys stock Yakov Horenstein (Sat Mar 06 1999 - 20:01:39 EET)
Re: Archaic Web Site Alert Marshall Burns (Sun Mar 07 1999 - 07:13:55 EET)
Re: Media request Alain BERNARD (Mon Mar 08 1999 - 09:54:33 EET)
resin SL 5510 price francois (Tue Mar 09 1999 - 03:58:57 EET)
Thanks. pgubb@howmet.com (Mon Mar 08 1999 - 18:00:05 EET)
tooling info Elaine Hunt (Mon Mar 08 1999 - 15:16:16 EET)
STL site Nemeth Karoly MEE (Mon Mar 08 1999 - 16:16:31 EET)
Re: tooling info bo yang me stnt (Mon Mar 08 1999 - 16:53:20 EET)
any info.? Christi Shores (Mon Mar 08 1999 - 17:54:20 EET)
Re: How lasers could print ads on food Foamcaster@aol.com (Mon Mar 08 1999 - 19:04:07 EET)
Re: STL site Christian LAVIGNE (Mon Mar 08 1999 - 19:51:45 EET)
Looking for an excellent CNC vendor John Celeste (Mon Mar 08 1999 - 21:24:17 EET)
Accuracy Study of 15 RP Systems MR ALBIN A HASTBACKA (Mon Mar 08 1999 - 20:17:44 EET)
Creating an .stl from unigraphics Narva, Jeffrey (Mon Mar 08 1999 - 22:10:00 EET)
Rapid Technologies for Plastic Tooling Leeann Starr Lane (Mon Mar 08 1999 - 22:54:45 EET)
Rapid Technologies for Plastic Tooling Leeann Starr Lane (Mon Mar 08 1999 - 23:09:22 EET)
Very Small Parts microtec (Mon Mar 08 1999 - 23:09:15 EET)
Question - Detroit RP&M Conference, etc. David K. Leigh (Mon Mar 08 1999 - 17:49:09 EET)
SLA-500, heat exchangers ERIC KING (Tue Mar 09 1999 - 00:55:54 EET)
Re: Question - Detroit RP&M Conference, etc. B. J. Arnold-Feret (Tue Mar 09 1999 - 00:23:03 EET)
RE: Accuracy Study of 15 RP Systems J $B5# (Tue Mar 09 1999 - 03:28:04 EET)
Another on bites the dust! Vern Carter (Tue Mar 09 1999 - 04:34:24 EET)
RE: Accuracy Study of 15 RP Systems J $B5# (Tue Mar 09 1999 - 04:11:48 EET)
Another on bites the dust! Steven Pollack (Tue Mar 09 1999 - 04:42:45 EET)
Re: SLA-500, heat exchangers long time (Tue Mar 09 1999 - 04:47:18 EET)
Re: STL site Frankie Kwok (Tue Mar 09 1999 - 05:11:02 EET)
Re: Reverse Engineering Puneet Tandon (Tue Mar 09 1999 - 12:18:59 EET)
STL files and netiquette Nemeth Karoly MEE (Tue Mar 09 1999 - 09:51:30 EET)
RP ralated publications found! Nemeth Karoly MEE (Tue Mar 09 1999 - 09:56:24 EET)
RE: Creating an .stl from unigraphics Bauer Juergen (Tue Mar 09 1999 - 10:29:18 EET)
Algorithms: P NP and More A.D.Bhatt (Tue Mar 09 1999 - 14:52:28 EET)
Fabbing food Marshall Burns (Tue Mar 09 1999 - 13:32:37 EET)
[Fwd: Another on bites the dust!] Jim Vander Linden (Tue Mar 09 1999 - 15:45:43 EET)
Re: Laser Sintering of Ceramics Extends Rapid Prototying Peter Stierlen (Tue Mar 09 1999 - 16:09:54 EET)
Re: Another on bites the dust! - clarification Todd Reese (Tue Mar 09 1999 - 17:03:00 EET)
Re: Another on bites the dust! Steve Stewart (Tue Mar 09 1999 - 17:51:24 EET)
Re: SLA-500, heat exchangers ERIC KING (Tue Mar 09 1999 - 19:59:53 EET)
IGES specificatiosn Serveis Tecnol�gics (Tue Mar 09 1999 - 19:08:27 EET)
Sony reorganization Marshall Burns (Tue Mar 09 1999 - 19:12:01 EET)
*** 3DSNASUG Announcement *** Joe Allison (Tue Mar 09 1999 - 19:24:43 EET)
*** 3DSNASUG Announcement *** Joe Allison (Tue Mar 09 1999 - 19:58:40 EET)
Re: Creating an .stl from unigraphics lblasch@opw-fc.com (Tue Mar 09 1999 - 12:05:29 EET)
Low melting Aluminium. pgubb@howmet.com (Tue Mar 09 1999 - 16:11:42 EET)
Star Wars .stl files? ScoundrelD@aol.com (Tue Mar 09 1999 - 21:27:40 EET)
VMC Operator Bobby Bishop (Tue Mar 09 1999 - 23:23:41 EET)
Re: Accuracy Study of 15 RP Systems bo yang me stnt (Wed Mar 10 1999 - 00:01:39 EET)
*** 3DSNASUG Announcement *** Amended Joe Allison (Wed Mar 10 1999 - 00:44:07 EET)
Re[2]: Another on bites the dust! lblasch@opw-fc.com (Tue Mar 09 1999 - 18:03:40 EET)
FW: SLA-500, heat exchangers DANIEL CHARLES DAVIS (Wed Mar 10 1999 - 02:54:56 EET)
low melting point aluminium Qingbin Liu (Wed Mar 10 1999 - 02:55:16 EET)
RE: Sony reorganization J $B5# (Wed Mar 10 1999 - 03:18:03 EET)
A Kelltool question Lytle, Tom (Wed Mar 10 1999 - 15:20:19 EET)
Re: IGES specificatiosn Irene Quinlan (Wed Mar 10 1999 - 15:55:33 EET)
Re: Star Wars .stl files? Rodrigo_B_Maria@multibras.com.br (Wed Mar 10 1999 - 16:43:11 EET)
Tensile streght and pressure strenght of keltool ? b.Kooijmans@ind.tno.nl (Wed Mar 10 1999 - 17:08:27 EET)
SLA Experience Kevin Liles (Wed Mar 10 1999 - 17:34:27 EET)
Seeking Used Ciba 5190 Bert Sobanik (Wed Mar 10 1999 - 17:54:15 EET)
PRESENTATION TO DESIGNERS Watson, David P (Wed Mar 10 1999 - 17:58:23 EET)
Re: PRESENTATION TO DESIGNERS Mr. Kyle Y. Root (Wed Mar 10 1999 - 18:44:33 EET)
Re[2]: Another on bites the dust! Joe Allison (Wed Mar 10 1999 - 19:11:28 EET)
Re: Tensile streght and pressure strenght of keltool ? Brad Fox (Wed Mar 10 1999 - 19:36:59 EET)
Re: PRESENTATION TO DESIGNERS Marshall Burns (Wed Mar 10 1999 - 19:33:24 EET)
update on tooling posting Elaine Hunt (Wed Mar 10 1999 - 20:38:29 EET)
Re: Re[2]: Another on bites the dust! B. J. Arnold-Feret (Wed Mar 10 1999 - 21:11:36 EET)
Re: Star Wars .stl files? SCat3D@aol.com (Wed Mar 10 1999 - 21:18:07 EET)
test Bradley VanDike (Wed Mar 10 1999 - 22:42:48 EET)
Follow up to Customer request Paul Lasman (Wed Mar 10 1999 - 22:51:46 EET)
Fwd: Follow up to Customer request Interpro Rapid Technologies (Thu Mar 11 1999 - 01:40:25 EET)
Rapid Prototyping Survey Questionnaire rajendra manchanda (Thu Mar 11 1999 - 07:52:34 EET)
Used LOM2030H DANIEL CHARLES DAVIS (Thu Mar 11 1999 - 10:48:29 EET)
Re: Star Wars .stl files? Scott -Scooter- Sutterer (Thu Mar 11 1999 - 16:58:49 EET)
RE: PRESENTATION TO DESIGNERS Brock Hinzmann (Thu Mar 11 1999 - 17:45:49 EET)
Re: SLA-500, heat exchangers ERIC KING (Thu Mar 11 1999 - 20:19:57 EET)
3-D Monitor? BUDELSKY@aol.com (Thu Mar 11 1999 - 20:48:17 EET)
Decline of RP - I don't think so (self-promotion) Mark Littlewood (Thu Mar 11 1999 - 20:49:54 EET)
Fwd: Decline of RP Elaine Hunt (Thu Mar 11 1999 - 21:26:01 EET)
SLA resin property questions Impact - Doug Johnson (Thu Mar 11 1999 - 23:28:00 EET)
Plynetics Impact - Doug Johnson (Fri Mar 12 1999 - 00:55:01 EET)
Friday Funnies...OT lblasch@opw-fc.com (Thu Mar 11 1999 - 17:35:09 EET)
Who places the order ? Paul Lasman (Fri Mar 12 1999 - 01:05:53 EET)
The scoop? SLA-500 heat exchangers DANIEL CHARLES DAVIS (Fri Mar 12 1999 - 03:23:35 EET)
RE: 3-D Monitor? Cheong Toh Kim Alvin (Fri Mar 12 1999 - 04:43:00 EET)
SLA500 Remote DANIEL CHARLES DAVIS (Fri Mar 12 1999 - 09:58:56 EET)
RP SYSTEM VENDORS IN UK Spencer Onuh (Fri Mar 12 1999 - 15:38:08 EET)
Looking for used PCA-250 Susaraba, Dave [DPYUS] (Fri Mar 12 1999 - 17:54:18 EET)
Call for papers ICALEO'99 Terry Feeley (Fri Mar 12 1999 - 19:01:20 EET)
New methods to SLS Nylon surface finish Ivan Ho (Fri Mar 12 1999 - 19:28:30 EET)
Plynetics Auctions Impact - Doug Johnson (Fri Mar 12 1999 - 20:11:32 EET)
MCP Vacuum Casting IJ George (Fri Mar 12 1999 - 20:28:47 EET)
Re: The scoop? SLA-500 heat exchangers ERIC KING (Fri Mar 12 1999 - 21:42:12 EET)
rapid prototyping seminars Hoerner, Brian - GCP (Fri Mar 12 1999 - 22:53:40 EET)
Friday humor: OT Spielman, Roger L (Fri Mar 12 1999 - 23:13:57 EET)
Streamlining the Product Development Process Monica & Glenn Whiteside (Sat Mar 13 1999 - 03:46:45 EET)
Re: A Kelltool question Jason (Fri Mar 12 1999 - 19:12:02 EET)
Wodziak Paper on GAs and Part Placement A.D.Bhatt (Sat Mar 13 1999 - 19:44:56 EET)
Strength of Photopolymers Puneet Tandon (Sat Mar 13 1999 - 15:22:16 EET)
Re: Strength of Photopolymers Harold Sears (Sat Mar 13 1999 - 20:18:14 EET)
Future of retailing Steven (Sat Mar 13 1999 - 20:18:38 EET)
Re: Friday humor: OT forge (Sat Mar 13 1999 - 20:26:24 EET)
SGI NT workstations Fusioneng@aol.com (Sun Mar 14 1999 - 02:29:41 EET)
RE: SGI NT workstations razdan (Sun Mar 14 1999 - 03:26:24 EET)
Re: Streamlining the Product Development Process Andrew Chantrill (Sun Mar 14 1999 - 13:10:57 EET)
methodology about theoretical mold life sandeep gupta (Mon Mar 15 1999 - 06:26:57 EET)
RP for production casting in metal Mr B C May (Mon Mar 15 1999 - 14:50:31 EET)
Nanotubes for Rapid Prototyping MR ALBIN A HASTBACKA (Mon Mar 15 1999 - 14:31:11 EET)
100 steel parts Pedro Garayo (Mon Mar 15 1999 - 17:07:51 EET)
uRapid '99: Web-Site now online! Ulrich Clemens (Mon Mar 15 1999 - 20:38:23 EET)
disposal of empty resin can Tien-min Gabriel Chu (Mon Mar 15 1999 - 22:56:45 EET)
Service Bureau costs? Jeff Smith (Tue Mar 16 1999 - 02:48:51 EET)
[GMP2000] Call for Papers Ian Gibson (Tue Mar 16 1999 - 02:49:33 EET)
Re: A Kelltool question RAHUL KUMAR (Mon Mar 15 1999 - 15:06:31 EET)
Re: methodology about theoretical mold life Alain BERNARD (Tue Mar 16 1999 - 09:57:48 EET)
RP SURVEY QUESTIONNAIRE rajendra manchanda (Tue Mar 16 1999 - 05:02:26 EET)
want address for MCP-HEK, Germany RAHUL KUMAR (Tue Mar 16 1999 - 07:48:24 EET)
RE: disposal of empty resin can philip.price@roverpte.demon.co.uk (Tue Mar 16 1999 - 13:01:07 EET)
Re: want address for MCP-HEK, Germany mwmcp (Tue Mar 16 1999 - 14:34:49 EET)
spring break riddle Elaine Hunt (Tue Mar 16 1999 - 15:05:05 EET)
Fwd: RP SURVEY QUESTIONNAIRE Elaine Hunt (Tue Mar 16 1999 - 16:53:17 EET)
RE: spring break riddle philip.price@roverpte.demon.co.uk (Tue Mar 16 1999 - 17:38:10 EET)
Re: disposal of empty resin can Advantage Prototype systems (Tue Mar 16 1999 - 17:59:31 EET)
Re: disposal of empty resin can Scott -Scooter- Sutterer (Tue Mar 16 1999 - 18:27:31 EET)
Re: disposal of empty resin can (fwd) Tien-min Gabriel Chu (Tue Mar 16 1999 - 19:31:53 EET)
Re: disposal of empty resin can Foamcaster@aol.com (Tue Mar 16 1999 - 20:05:53 EET)
Replacement for 3D Systems Actua Chris Aiken (Tue Mar 16 1999 - 19:47:41 EET)
Re: Replacement for 3D Systems Actua Scott -Scooter- Sutterer (Tue Mar 16 1999 - 22:09:54 EET)
Textured SLA parts Bruce E. LeMaster (Tue Mar 16 1999 - 22:43:00 EET)
Re: Methods for 100 steel parts Britt Ferrill (Tue Mar 16 1999 - 22:52:02 EET)
throw away computers Elaine Hunt (Tue Mar 16 1999 - 23:01:27 EET)
SEK Technologies MR ALBIN A HASTBACKA (Tue Mar 16 1999 - 23:12:56 EET)
RE: Replacement for 3D Systems Actua Pardo, Brian T (Wed Mar 17 1999 - 01:22:10 EET)
Plynetics Express Auction Karl Denton (Wed Mar 17 1999 - 01:27:21 EET)
RE: disposal of empty resin can DANIEL CHARLES DAVIS (Wed Mar 17 1999 - 02:25:25 EET)
Texturing following up Bruce E. LeMaster (Wed Mar 17 1999 - 03:01:23 EET)
Re: Replacement for 3D Systems Actua/SLA500 ATiburon@aol.com (Wed Mar 17 1999 - 03:11:16 EET)
Re: disposal of empty resin can ATiburon@aol.com (Wed Mar 17 1999 - 03:37:18 EET)
RE: disposal of empty resin can DANIEL CHARLES DAVIS (Wed Mar 17 1999 - 06:36:29 EET)
Strength of Photopolymers Puneet Tandon (Wed Mar 17 1999 - 10:24:35 EET)
Pro/E to .STL? Frankie Kwok (Wed Mar 17 1999 - 09:47:25 EET)
Re: Pro/E to .STL? Jens Hoffmann (Wed Mar 17 1999 - 10:57:18 EET)
Virtual Prototyping DANIEL CHARLES DAVIS (Wed Mar 17 1999 - 12:29:13 EET)
RP Material Properties Gerard Ryder (Wed Mar 17 1999 - 13:27:01 EET)
disposal of spoiled "vacuum casting" resin Sergio Martins (Wed Mar 17 1999 - 14:32:43 EET)
Re: disposal of empty resin can John Walmsley (Wed Mar 17 1999 - 14:32:03 EET)
Re: Replacement for 3D Systems Actua/SLA500 Scott -Scooter- Sutterer (Wed Mar 17 1999 - 15:21:19 EET)
Re: Pro/E to .STL? Scott -Scooter- Sutterer (Wed Mar 17 1999 - 15:28:24 EET)
Re: Virtual Prototyping Henri Koukka (Wed Mar 17 1999 - 15:43:55 EET)
Re: Replacement for 3D Systems Actua/SLA500 Scott -Scooter- Sutterer (Wed Mar 17 1999 - 15:42:50 EET)
Re: disposal of spoiled "vacuum casting" resin MET-L-FLO INC. (Wed Mar 17 1999 - 15:53:53 EET)
Re: Virtual Prototyping Paul J. Burr (Wed Mar 17 1999 - 15:58:35 EET)
Plynetics machines Drew Brown (Wed Mar 17 1999 - 16:58:00 EET)
Re[2]: disposal of empty resin can lblasch@opw-fc.com (Wed Mar 17 1999 - 09:14:33 EET)
Rapid prototyping food Warner Babcock (Wed Mar 17 1999 - 17:39:24 EET)
Virtual Prototyping Terry T. Wohlers (Wed Mar 17 1999 - 18:04:29 EET)
Re: Pro/E to .STL? Justin R. Kidder (Wed Mar 17 1999 - 18:31:49 EET)
Re: Replacement for 3D Systems Actua/SLA500 Justin R. Kidder (Wed Mar 17 1999 - 18:40:30 EET)
Looking for Douglas Taft Neil Hopkinson (Wed Mar 17 1999 - 19:02:07 EET)
Student seeking internship possibilities Jedi Master Elliott (Wed Mar 17 1999 - 18:59:47 EET)
Re: Replacement for 3D Systems Actua/SLA500 Scott -Scooter- Sutterer (Wed Mar 17 1999 - 19:04:52 EET)
RE: disposal of empty resin can philip.price@roverpte.demon.co.uk (Wed Mar 17 1999 - 10:52:15 EET)
Re: pro-user: Student seeking internship possibilities Erni Halaxa (Wed Mar 17 1999 - 19:19:14 EET)
3D Actua Steve Hengsperger (Wed Mar 17 1999 - 19:53:26 EET)
Re[2]: disposal of empty resin can lblasch@opw-fc.com (Wed Mar 17 1999 - 12:24:49 EET)
Actua Brad Fox (Wed Mar 17 1999 - 20:11:28 EET)
Re: Student seeking internship possibilities Fusioneng@aol.com (Wed Mar 17 1999 - 20:26:02 EET)
User Part in IGES format MR ALBIN A HASTBACKA (Wed Mar 17 1999 - 18:49:35 EET)
RE: Actua DANIEL CHARLES DAVIS (Thu Mar 18 1999 - 02:44:20 EET)
RE: throw away computers Monica & Glenn Whiteside (Thu Mar 18 1999 - 03:49:56 EET)
Re: Actua Phil Harnett (Thu Mar 18 1999 - 03:51:33 EET)
from RP student Shankaranand.K.N. (Wed Mar 17 1999 - 12:02:25 EET)
Re: Pro/E to .STL? Puneet Tandon (Thu Mar 18 1999 - 09:23:37 EET)
Re: Virtual Prototyping Srinivas Samavedam (Thu Mar 18 1999 - 06:22:23 EET)
Re: Virtual Prototyping Srinivas Samavedam (Thu Mar 18 1999 - 06:43:10 EET)
Origin of an image-oops... Juha Suokas (Thu Mar 18 1999 - 10:14:02 EET)
Origin of an image, CT 'n tooling Juha Suokas (Thu Mar 18 1999 - 10:10:45 EET)
Nylon & Glass filled SL resins Ross Nicholls (Thu Mar 18 1999 - 12:13:04 EET)
OUR REFERENCE 990343 MULTISTATION (Thu Mar 18 1999 - 14:43:40 EET)
Actua Thermojet 75 Material Lowicki, Brian R (Thu Mar 18 1999 - 16:04:23 EET)
Looking for a fish... Impact - Doug Johnson (Thu Mar 18 1999 - 16:01:09 EET)
RE: Replacement for 3D Systems Actua Chad L Buchanan (Thu Mar 18 1999 - 16:29:17 EET)
RE: Looking for a fish... philip.price@roverpte.demon.co.uk (Thu Mar 18 1999 - 17:03:52 EET)
RE: Looking for a fish... trevor.howarth@roverpte.demon.co.uk (Thu Mar 18 1999 - 17:38:05 EET)
Nylon & Glass filled StereoLithography resins Ross Nicholls (Thu Mar 18 1999 - 17:57:36 EET)
FW: Actua Thermojet 75 Material Lowicki, Brian R (Thu Mar 18 1999 - 18:20:30 EET)
RE: Actua Spielman, Roger L (Thu Mar 18 1999 - 20:26:21 EET)
RE: Actua Brad Fox (Thu Mar 18 1999 - 23:09:47 EET)
Re: Origin of an image, CT 'n tooling EdGrenda@aol.com (Thu Mar 18 1999 - 23:18:53 EET)
art foundries ud (Fri Mar 19 1999 - 02:47:00 EET)
RE: Origin of an image, CT 'n tooling Jim Rollins (Fri Mar 19 1999 - 02:53:28 EET)
Re: art foundries michael rees (Fri Mar 19 1999 - 03:27:44 EET)
RE: art foundries Bruce Okkema (Fri Mar 19 1999 - 04:06:51 EET)
PCA 250 MULTISTATION (Fri Mar 19 1999 - 09:45:41 EET)
Service Bureau in Turkey genpas (Fri Mar 19 1999 - 10:42:56 EET)
Re: RP Material Properties Christian_Nelson/DTM@dtm-corp.com (Fri Mar 19 1999 - 14:54:23 EET)
Re: Textured SLA parts Bruce E. LeMaster (Fri Mar 19 1999 - 15:32:36 EET)
Still looking for .... Impact - Doug Johnson (Fri Mar 19 1999 - 15:26:49 EET)
About Service Bureau in Turkey genpas (Fri Mar 19 1999 - 16:55:11 EET)
(no subject) Andrzejewski, Jan (Fri Mar 19 1999 - 16:54:28 EET)
Re: Nylon & Glass filled StereoLithography resins aaroflex (Fri Mar 19 1999 - 17:50:53 EET)
RE: Nylon & Glass filled StereoLithography resins Bauer Juergen (Fri Mar 19 1999 - 19:08:49 EET)
Peter Gien, Pogo Software Marshall Burns (Fri Mar 19 1999 - 21:12:01 EET)
Off topic - Friday Humor Monica & Glenn Whiteside (Fri Mar 19 1999 - 21:43:35 EET)
Info on RP Business in Chicago Rafael Santillan (Fri Mar 19 1999 - 21:52:06 EET)
Chocolate in Silicone Puneet Tandon (Sat Mar 20 1999 - 12:56:05 EET)
Thoughts and comments on the Plynetics Auction (Schaumburg location) Karl Denton (Sat Mar 20 1999 - 17:05:19 EET)
RE: Chocolate in Silicone Karl Denton (Sat Mar 20 1999 - 17:05:26 EET)
Re: Textured SLA parts Bruce E. LeMaster (Sat Mar 20 1999 - 17:24:02 EET)
Re: Textured SLA parts Lee Eisinger (Sat Mar 20 1999 - 18:51:03 EET)
Re: art foundries Tom Richards (Sun Mar 21 1999 - 00:27:53 EET)
Re: RP for production casting in metal Tom Richards (Sun Mar 21 1999 - 00:35:42 EET)
RE: Replacement for 3D Systems Actua Tom Richards (Sun Mar 21 1999 - 00:49:27 EET)
Re: 100 steel parts Tom Richards (Sun Mar 21 1999 - 00:57:12 EET)
Information about JewelCad Puneet Tandon (Sun Mar 21 1999 - 15:22:44 EET)
Re: Information about JewelCad Shreyas J Bakshi (Sun Mar 21 1999 - 15:27:38 EET)
Art and Science michael rees (Sun Mar 21 1999 - 21:29:21 EET)
New Web Site - Lotus Corp Karl Denton (Sun Mar 21 1999 - 23:14:25 EET)
Off-topic (somewhat): RE: Father of the plastics industry? Monica & Glenn Whiteside (Mon Mar 22 1999 - 01:55:03 EET)
Off-topic, RE: Monday funnies Monica & Glenn Whiteside (Mon Mar 22 1999 - 01:59:13 EET)
RE: Information about JewelCad DANIEL CHARLES DAVIS (Mon Mar 22 1999 - 02:56:55 EET)
Re: New Web Site - Lotus Corp Marshall Burns (Mon Mar 22 1999 - 04:09:39 EET)
QuickCast in a hurry DANIEL CHARLES DAVIS (Mon Mar 22 1999 - 06:13:19 EET)
RE: New Web Site - Lotus Corp Karl Denton (Mon Mar 22 1999 - 06:20:44 EET)
Re: New Web Site - Lotus Corp Marshall Burns (Mon Mar 22 1999 - 07:27:31 EET)
Fwd: RP mailing list ! Elaine Hunt (Mon Mar 22 1999 - 16:18:28 EET)
Re: SS420 tool PR on RP list Tom Richards (Mon Mar 22 1999 - 20:05:02 EET)
SLA-5000 Ben Staub (Mon Mar 22 1999 - 18:42:14 EET)
Re: Information about JewelCad Tom Richards (Mon Mar 22 1999 - 20:45:41 EET)
Re: QuickCast in a hurry Tom Richards (Mon Mar 22 1999 - 20:51:53 EET)
RE: Thoughts and comments on the Plynetics Auction (Schaumburg lo cation) Caffrey, Tim (Mon Mar 22 1999 - 17:49:20 EET)
Materialise job opening CAD/CAM - Rapid Tooling Mark Bliek (Mon Mar 22 1999 - 17:59:56 EET)
Re: SS420 tool PR on RP list B. J. Arnold-Feret (Mon Mar 22 1999 - 18:24:44 EET)
SME & ASME Explore Merger Lori Hastie (Mon Mar 22 1999 - 18:32:55 EET)
Re: Replacement for 3D Systems Actua Scott -Scooter- Sutterer (Mon Mar 22 1999 - 18:49:58 EET)
SL resin safety Deak, Steve (Mon Mar 22 1999 - 19:27:13 EET)
Re: Replacement for 3D Systems Actua Tom Richards (Mon Mar 22 1999 - 22:54:25 EET)
Medical scans to STL Chris Sutcliffe (Mon Mar 22 1999 - 20:30:35 EET)
Re: Art and Science michael rees (Mon Mar 22 1999 - 20:39:36 EET)
Re: Art and Science michael rees (Mon Mar 22 1999 - 21:05:40 EET)
ThermoJet MR ALBIN A HASTBACKA (Mon Mar 22 1999 - 19:45:49 EET)
[Fwd: ProE designers] Stuart Daley (Mon Mar 22 1999 - 21:51:09 EET)
Re: Art and Science Tom Richards (Tue Mar 23 1999 - 00:48:20 EET)
Re: Medical scans to STL Gary A. Fudge (Mon Mar 22 1999 - 22:06:44 EET)
Paraform Application Engineer Opportunity - Detroit area Brian Kissel (Mon Mar 22 1999 - 22:26:45 EET)
Re: Medical scans to STL Andy Christensen (Mon Mar 22 1999 - 23:29:36 EET)
Web based training from SME Linda Johnson (Mon Mar 22 1999 - 23:32:41 EET)
Former Plynetics Employee ? todd cleverley (Tue Mar 23 1999 - 00:02:13 EET)
RE: Thoughts and comments on the Plynetics Auction (Schaumburg location) Karl Denton (Tue Mar 23 1999 - 02:07:05 EET)
FW: SME & ASME Explore Merger Karl Denton (Tue Mar 23 1999 - 02:18:03 EET)
More info on viscosity of 7100 Miller, Michael W (Tue Mar 23 1999 - 02:57:32 EET)
1/4-20 thread? Doug Bucci (Tue Mar 23 1999 - 02:58:15 EET)
RE: Thoughts and comments on the Plynetics Auction (Schaumburg l Brock Hinzmann (Tue Mar 23 1999 - 03:39:16 EET)
SME & ASME Explore Merger B. J. Arnold-Feret (Tue Mar 23 1999 - 05:15:09 EET)
Re: Chocolate in Silicone markschanze (Tue Mar 23 1999 - 06:09:51 EET)
RP internship program markschanze (Tue Mar 23 1999 - 06:28:21 EET)
looking for applications engineers Herve de Baillenx (Mon Mar 22 1999 - 06:48:27 EET)
Re: New Web Site - Lotus Corp Yruwhining@aol.com (Tue Mar 23 1999 - 09:05:18 EET)
Re: "in some cases the most arrogant about it" Yruwhining@aol.com (Tue Mar 23 1999 - 09:27:04 EET)
Re: whining too much???? Chris Sutcliffe (Tue Mar 23 1999 - 13:01:41 EET)
Request of subscription kalbert chaney (Tue Mar 23 1999 - 13:58:57 EET)
Re: "in some cases the most arrogant about it" Joe Allison (Tue Mar 23 1999 - 14:30:57 EET)
RE: whining too much???? Karl Denton (Tue Mar 23 1999 - 14:36:53 EET)
Re: "in some cases the most arrogant about it" Scott -Scooter- Sutterer (Tue Mar 23 1999 - 15:56:47 EET)
Re: "in some cases the most arrogant about it" Markus Rettenmaier (Tue Mar 23 1999 - 16:44:56 EET)
RE: QuickCast in a hurry Tom Richards (Tue Mar 23 1999 - 20:39:35 EET)
Re: 1/4-20 thread? Ray Brandes (Tue Mar 23 1999 - 17:49:21 EET)
Re: RP for production casting in metal Tom Richards (Tue Mar 23 1999 - 20:48:44 EET)
Re: "in some cases the most arrogant about it" Foamcaster@aol.com (Tue Mar 23 1999 - 18:42:53 EET)
Re: "we should learn to ignore things and people" Foamcaster@aol.com (Tue Mar 23 1999 - 19:00:45 EET)
RE: QuickCast in a hurry Jeff McBride (Tue Mar 23 1999 - 19:12:25 EET)
Electroplating SLA parts Alta Precision (Tue Mar 23 1999 - 19:18:14 EET)
RE: QuickCast in a hurry Tom Richards (Tue Mar 23 1999 - 22:27:49 EET)
RE: 1/4-20 thread? will pattison (Tue Mar 23 1999 - 19:37:47 EET)
RE: 1/4-20 thread? Tom Richards (Tue Mar 23 1999 - 23:24:30 EET)
Re: Electroplating SLA parts Gabe Clark (Tue Mar 23 1999 - 20:54:27 EET)
Renee on a Dime MR ALBIN A HASTBACKA (Tue Mar 23 1999 - 19:26:22 EET)
RE: Renee on a Dime Geoff Smith-Moritz (Tue Mar 23 1999 - 21:42:03 EET)
Re: Art and Science Klas Boivie (Tue Mar 23 1999 - 21:55:34 EET)
medical scanning Chris Sutcliffe (Tue Mar 23 1999 - 22:03:10 EET)
Re: Art and Science Tom Richards (Wed Mar 24 1999 - 01:13:29 EET)
Looking for pressure tank Vito Gervasi (Tue Mar 23 1999 - 23:20:27 EET)
Re: Renee on a Dime lisa (Wed Mar 24 1999 - 01:14:36 EET)
Benchmarking Various Methods in Rapid Prototyping MR ALBIN A HASTBACKA (Tue Mar 23 1999 - 23:31:15 EET)
Re: Looking for pressure tank Fusioneng@aol.com (Wed Mar 24 1999 - 01:35:50 EET)
Re[2]: Art and Science lblasch@opw-fc.com (Tue Mar 23 1999 - 17:31:00 EET)
RE: Thoughts and comments on the Plynetics Auction (Schaumburg l Monica & Glenn Whiteside (Wed Mar 24 1999 - 03:49:01 EET)
Re: 1/4-20 thread? Doug Bucci (Wed Mar 24 1999 - 05:57:15 EET)
RE: Electroplating SLA parts Murphy, Matt (Wed Mar 24 1999 - 11:12:11 EET)
I have been trying to find out pay scales for employees within the RP industry, does anyone know of Simon Slater (Wed Mar 24 1999 - 14:58:04 EET)
Texture on SLA Lee Eisinger (Wed Mar 24 1999 - 15:14:13 EET)
New Design Models Jonathan Reynolds (Wed Mar 24 1999 - 15:33:01 EET)
Re: QuickCast in a hurry Tom Richards (Wed Mar 24 1999 - 18:36:50 EET)
RE: New Design Models will pattison (Wed Mar 24 1999 - 16:12:22 EET)
wage question will pattison (Wed Mar 24 1999 - 16:14:55 EET)
RE: QuickCast in a hurry Jan.Hill@adidas.de (Wed Mar 24 1999 - 16:29:34 EET)
RE: 1/4-20 thread? will pattison (Wed Mar 24 1999 - 16:32:44 EET)
Re: 1/4-20 thread? Marshall Burns (Wed Mar 24 1999 - 16:50:59 EET)
RE: 1/4-20 thread? will pattison (Wed Mar 24 1999 - 17:06:25 EET)
Re: New Design Models Josh D. Kramlick (Wed Mar 24 1999 - 17:13:31 EET)
RE: QuickCast in a hurry Tom Richards (Wed Mar 24 1999 - 20:26:30 EET)
My two cents long time (Wed Mar 24 1999 - 17:30:54 EET)
Company information required stephen.windsor@roverpte.demon.co.uk (Wed Mar 24 1999 - 16:56:08 EET)
My two cents long time (Wed Mar 24 1999 - 17:30:45 EET)
RE: 1/4-20 thread? Tom Richards (Wed Mar 24 1999 - 20:33:08 EET)
RE: 1/4-20 thread? will pattison (Wed Mar 24 1999 - 17:50:14 EET)
New Design Models Jonathan Reynolds (Wed Mar 24 1999 - 18:15:59 EET)
Re: wage question aaroflex (Wed Mar 24 1999 - 18:46:53 EET)
Order Prototypes on the Internet? Randy Rua (Wed Mar 24 1999 - 19:37:07 EET)
Re: My two cents Tom Richards (Wed Mar 24 1999 - 22:51:24 EET)
Re: 1/4-20 thread? Marshall Burns (Wed Mar 24 1999 - 20:42:02 EET)
Re: Looking for pressure tank James P. Harrison (Wed Mar 24 1999 - 22:08:55 EET)
RE: 1/4-20 thread? will pattison (Wed Mar 24 1999 - 21:08:27 EET)
Re: QuickCast in a hurry ATiburon@aol.com (Thu Mar 25 1999 - 04:43:50 EET)
Re: New Design Models Rick Harrington (Thu Mar 25 1999 - 13:51:29 EET)
RE: 1/4-20 thread? will pattison (Wed Mar 24 1999 - 21:03:10 EET)
Engineering Position at Helisys Michael Feygin (Thu Mar 25 1999 - 01:12:51 EET)
RE: QuickCast in a hurry graham.tromans@roverpte.demon.co.uk (Thu Mar 25 1999 - 14:36:15 EET)
RE: Order Prototypes on the Internet? trevor.howarth@roverpte.demon.co.uk (Thu Mar 25 1999 - 15:23:45 EET)
stl files E.M. Groenewolt (Thu Mar 25 1999 - 16:14:51 EET)
Poser Andrzejewski, Jan (Thu Mar 25 1999 - 16:31:49 EET)
Re: Looking for pressure tank Keith Nybakke (Wed Mar 24 1999 - 23:07:20 EET)
Re: Order Prototypes on the Internet? Allen Graff (Wed Mar 24 1999 - 21:03:58 EET)
RE: 1/4-20 thread? Tom Richards (Wed Mar 24 1999 - 22:53:57 EET)
Contact graham.tromans@roverpte.demon.co.uk (Thu Mar 25 1999 - 17:44:44 EET)
RapidTool materials designation Franck Lacan (Thu Mar 25 1999 - 18:26:11 EET)
Re: Order Prototypes on the Internet? Tom Richards (Thu Mar 25 1999 - 21:51:38 EET)
Re: QuickCast in a hurry Tom Richards (Thu Mar 25 1999 - 21:55:33 EET)
RP mailing list Leu, Ming C (Thu Mar 25 1999 - 18:54:46 EET)
RE: QuickCast in a hurry Tom Richards (Thu Mar 25 1999 - 22:04:46 EET)
Re: QuickCast in a hurry Robert Welther (Thu Mar 25 1999 - 21:32:14 EET)
News Release - DeskArtes Expert Series Software Michael Tsenter (Thu Mar 25 1999 - 22:22:11 EET)
Re: QuickCast in a hurry Vern Carter (Fri Mar 26 1999 - 02:21:13 EET)
Rhino and SolidWorks? Marshall Burns (Fri Mar 26 1999 - 02:07:25 EET)
Re: Order Prototypes on the Internet? Christian LAVIGNE (Fri Mar 26 1999 - 06:50:39 EET)
ANNOUNCE - RapidForm 1.3 Beta Released !! �̵�� (Fri Mar 26 1999 - 07:37:25 EET)
Re: Order Prototypes on the Internet? Shreyas J Bakshi (Fri Mar 26 1999 - 10:02:27 EET)
Number of die casting parts/year FAKSFuE@aol.com (Fri Mar 26 1999 - 10:22:37 EET)
RE: QuickCast in a hurry graham.tromans@roverpte.demon.co.uk (Fri Mar 26 1999 - 11:40:36 EET)
Re: Rhino and SolidWorks? Mark Bannister (Fri Mar 26 1999 - 17:36:59 EET)
Mouse Scanning ChathamRes@aol.com (Fri Mar 26 1999 - 16:09:28 EET)
(no subject) razdan (Fri Mar 26 1999 - 20:20:04 EET)
(no subject) razdan (Fri Mar 26 1999 - 22:23:46 EET)
good-bye ... Candy Barone (Fri Mar 26 1999 - 22:21:19 EET)
Secondary tooling - Sheet Metal G.Sriram, BayState Infotech, Chennai (Sat Mar 27 1999 - 10:52:36 EET)
Digital Sculpture Competition Christian LAVIGNE (Sat Mar 27 1999 - 06:08:12 EET)
RE: Secondary tooling - Sheet Metal Du Zhaohui (Dr) (Sat Mar 27 1999 - 06:27:50 EET)
[Fwd: Order Prototypes on the Internet?] Shreyas J Bakshi (Sat Mar 27 1999 - 06:43:00 EET)
Re: Digital Sculpture Competition Marshall Burns (Sat Mar 27 1999 - 06:51:06 EET)
Attn: G.Sriram - RP Patterns Puneet Tandon (Sat Mar 27 1999 - 10:47:17 EET)
Rhinoceros 1.1 Beta 24-Mar-1999 available Bob McNeel (Thu Mar 25 1999 - 03:40:31 EET)
Looking for a Scanning Service Bureau Timmel, Ingrid (Sat Mar 27 1999 - 22:22:58 EET)
RE: New Design Models Prof. P M Dickens (Fri Mar 26 1999 - 18:04:11 EET)
RP Machine Distributor for UK Prof. P M Dickens (Fri Mar 26 1999 - 04:31:00 EET)
patents DKBynum (Sun Mar 28 1999 - 07:59:52 EEST)
Sla250/30 replacement computers cresilas (Sun Mar 28 1999 - 20:28:56 EEST)
RE: Sla250/30 replacement computers Rob Anderson (Mon Mar 29 1999 - 02:50:44 EEST)
Blowmolding olah (Mon Mar 29 1999 - 06:06:19 EEST)
<aucun objet> Pedro Gago (Sun Mar 29 1998 - 14:34:31 EEST)
Secondary Tooling - Sheet Metal G.Sriram, BayState Infotech, Chennai (Mon Mar 29 1999 - 09:25:59 EEST)
RE: Secondary Tooling - Sheet Metal Bauer Juergen (Mon Mar 29 1999 - 18:29:51 EEST)
ATTENTION LOM USERS Travis Hoepner (Mon Mar 29 1999 - 18:53:58 EEST)
Melissa Virus Alert, not a drill. PnRMolds@aol.com (Mon Mar 29 1999 - 19:47:23 EEST)
Importing Surface Files Into Solidworks Gerard Furbershaw (Mon Mar 29 1999 - 20:51:27 EEST)
RE: Blowmolding Jim Williams (Mon Mar 29 1999 - 21:58:14 EEST)
RP questionnaire rajendra manchanda (Mon Mar 29 1999 - 22:12:45 EEST)
How to sell RP equipment? apminc@execpc.com (Mon Mar 29 1999 - 23:05:48 EEST)
RE: Blowmolding Richard_Smeenk/DTM@dtm-corp.com (Mon Mar 29 1999 - 23:33:21 EEST)
Re: Blowmolding B. J. Arnold-Feret (Tue Mar 30 1999 - 01:32:15 EEST)
Information wanted about SL5170 John Male (Tue Mar 30 1999 - 13:22:28 EEST)
EOS 3rd International User Meeting Shellabear@EOS-GmbH.de (Tue Mar 30 1999 - 22:07:13 EEST)
SLA surface texturing trevor.howarth@roverpte.demon.co.uk (Wed Mar 31 1999 - 13:08:27 EEST)
RP Benchmarking Gerard Ryder (Wed Mar 31 1999 - 14:46:11 EEST)
Benchmarking Data Gerard Ryder (Wed Mar 31 1999 - 16:29:06 EEST)
Re: Benchmarking Data Christian_Nelson/DTM@dtm-corp.com (Wed Mar 31 1999 - 17:56:49 EEST)
More Texturing Joe Frantz (Wed Mar 31 1999 - 18:04:29 EEST)
male brain picture Elaine Hunt (Wed Mar 31 1999 - 22:36:38 EEST)
RE: New Design Models will pattison (Wed Mar 31 1999 - 23:29:29 EEST)
Re: male brain picture Wayne L Foss (Wed Mar 31 1999 - 23:56:01 EEST)
Re: male brain picture Paul Burr (Thu Apr 01 1999 - 04:46:53 EEST)
brockware (fwd) Rapid Dude (Thu Apr 01 1999 - 08:15:29 EEST)
Farewell (fwd) Rapid Dude (Thu Apr 01 1999 - 08:13:23 EEST)
RE: brockware (fwd) philip.price@roverpte.demon.co.uk (Thu Apr 01 1999 - 10:50:56 EEST)
RE: brockware (fwd) Mark Littlewood (Thu Apr 01 1999 - 13:53:04 EEST)
vacuum chambers Pablo Elenter (Thu Apr 01 1999 - 15:51:47 EEST)
farewell Wade Williams (Thu Apr 01 1999 - 19:38:19 EEST)
Rapid Steel TRAVIS BEHARA (Thu Apr 01 1999 - 17:01:41 EEST)
Re: vacuum chambers Yannick seeleuthner (Thu Apr 01 1999 - 17:26:11 EEST)
Fairwell Tom Richards (Thu Apr 01 1999 - 21:01:40 EEST)
Re: Rapid Steel tjgorn01 (Thu Apr 01 1999 - 18:53:34 EEST)
Thanks Resin Removal Scott -Scooter- Sutterer (Thu Apr 01 1999 - 19:16:42 EEST)
Master Cam to .stl Scott -Scooter- Sutterer (Thu Apr 01 1999 - 19:43:37 EEST)
Requesting Advice/Suggestions on Post-Processing of SLS Duraform Mitchell J. A (Thu Apr 01 1999 - 21:07:01 EEST)
FDM Quote needed Paul Lasman (Thu Apr 01 1999 - 22:34:35 EEST)
Friday Humor Brandon Jacobsen (Thu Apr 01 1999 - 23:01:36 EEST)
Re: Requesting Advice/Suggestions on Post-Processing of SLS Duraform SIBCOINC@aol.com (Fri Apr 02 1999 - 01:07:44 EEST)
Re: Master Cam to .stl ATiburon@aol.com (Fri Apr 02 1999 - 05:20:32 EEST)
FW: The reason we all work so much! Bruce Okkema (Fri Apr 02 1999 - 06:11:19 EEST)
New web site for Fusion Engineering Jason (Fri Apr 02 1999 - 08:32:56 EEST)
Re: Master Cam to .stl Shreyas J Bakshi (Fri Apr 02 1999 - 08:38:55 EEST)
Re: Master Cam to .stl Megsinet (Thu Apr 01 1999 - 21:32:53 EEST)
Source needed Sales & Quoting office (Fri Apr 02 1999 - 17:20:03 EEST)
REPS Randy Ramsey (Fri Apr 02 1999 - 18:19:17 EEST)
Re: Master Cam to .stl C. Brock Rooney (Fri Apr 02 1999 - 19:26:17 EEST)
Off-topic: Friday funnies Monica & Glenn Whiteside (Sat Apr 03 1999 - 02:02:43 EEST)
RE: Off-topic: Friday funnies Spielman, Roger L (Sat Apr 03 1999 - 02:28:38 EEST)
Information Required Kevin Liles (Sat Apr 03 1999 - 16:28:05 EEST)
Re: Replacement for 3D Systems Actua thoms@naisp.net (Mon Apr 05 1999 - 05:50:28 EEST)
Apply for postdoctoral/Research fellow guojs@263.net (Mon Apr 05 1999 - 11:38:06 EEST)
overflow work for SOMOS resin Speer, Robert J. (Mon Apr 05 1999 - 15:13:11 EEST)
DuPont Sells Somos(R) Business to DSM Desotech Michelle P. Wyatt (Mon Apr 05 1999 - 17:52:04 EEST)
remove me from rp mail list Marty Schuster (Mon Apr 05 1999 - 18:31:54 EEST)
Re: Replacement for 3D Systems Actua Paul J. Burr (Mon Apr 05 1999 - 19:02:29 EEST)
Donate RP equipmentfor tax a tax deduction Benno Vanoort (Mon Apr 05 1999 - 19:54:20 EEST)
Re: Replacement for 3D Systems Actua aaroflex (Tue Apr 06 1999 - 01:28:14 EEST)
RP article on freeze cast process (FCP) Monica & Glenn Whiteside (Tue Apr 06 1999 - 02:02:34 EEST)
RP article: Sheet metal forming with RP Tooling Monica & Glenn Whiteside (Tue Apr 06 1999 - 02:15:05 EEST)
Vs: Request Jesper Damvig (Tue Apr 06 1999 - 10:18:01 EEST)
Vs: Request Jesper Damvig (Tue Apr 06 1999 - 10:14:13 EEST)
ScanMail Message: To Sender, virus found and action taken. (fwd) Rapid Dude (Tue Apr 06 1999 - 10:38:50 EEST)
WARNING -- READ ME NOW! DANIEL CHARLES DAVIS (Tue Apr 06 1999 - 11:51:06 EEST)
FW: VIRUS DETECTED in mail for you Popat Ajay AH (Tue Apr 06 1999 - 11:52:33 EEST)
Re: Vs: Request Virus Alert Gary Allen (Tue Apr 06 1999 - 14:18:23 EEST)
Re: Replacement for 3D Systems Actua Technical Support (Tue Apr 06 1999 - 15:14:53 EEST)
Fwd: Replacement for 3D Systems Actua DSL3266@aol.com (Tue Apr 06 1999 - 15:16:41 EEST)
Re: Vs: Request Tom Richards (Tue Apr 06 1999 - 18:47:32 EEST)
remove me from the rp mail list Jim Rampe (Tue Apr 06 1999 - 16:11:01 EEST)
Re: overflow work for SOMOS resin aaroflex (Tue Apr 06 1999 - 17:16:56 EEST)
desk top milling Elaine Hunt (Tue Apr 06 1999 - 17:14:46 EEST)
(IMPORTANT MESSAGE ABOUT EARLIER INFECTED MAIL) Jesper Damvig (Tue Apr 06 1999 - 16:55:06 EEST)
Re: desk top milling Greg Pettengill (Tue Apr 06 1999 - 18:25:34 EEST)
Early Y2K Problem MR ALBIN A HASTBACKA (Tue Apr 06 1999 - 21:24:07 EEST)
Re: Noname critical of AAROFLEX at OSU aaroflex (Wed Apr 07 1999 - 01:19:01 EEST)
Re: Fwd: Replacement for 3D Systems Actua aaroflex (Wed Apr 07 1999 - 01:20:50 EEST)
Re: Noname critical of AAROFLEX at OSU Fusioneng@aol.com (Wed Apr 07 1999 - 02:14:16 EEST)
Re: Noname critical of AAROFLEX at OSU aaroflex (Wed Apr 07 1999 - 04:32:14 EEST)
Looking for RP service provider in USA (Detroit area) Raymond Lee (Wed Apr 07 1999 - 04:08:22 EEST)
Re: Noname critical of AAROFLEX at OSU Raymond Lee (Wed Apr 07 1999 - 04:22:02 EEST)
Re: Noname critical of AAROFLEX at OSU ATiburon@aol.com (Wed Apr 07 1999 - 04:29:48 EEST)
Re: RP article on freeze cast process (FCP) ATiburon@aol.com (Wed Apr 07 1999 - 04:21:30 EEST)
Re: Noname critical of AAROFLEX at OSU Jason (Wed Apr 07 1999 - 05:17:28 EEST)
Re: Noname critical of AAROFLEX at OSU David (Thor) Maxfield (Wed Apr 07 1999 - 08:44:37 EEST)
Competition michael rees (Wed Apr 07 1999 - 09:11:01 EEST)
Mid week Humor michael rees (Wed Apr 07 1999 - 09:11:38 EEST)
SGI Monitors Scott -Scooter- Sutterer (Wed Apr 07 1999 - 16:40:46 EEST)
Re: Looking for RP service provider in USA (Detroit area) PnRMolds@aol.com (Wed Apr 07 1999 - 16:46:12 EEST)
New LIPTOOL web-site / Questions re. die casting, RT, etc. Nick Osborn (Wed Apr 07 1999 - 19:56:54 EEST)
3D scanning for Gears Rajat Mehta (Wed Apr 07 1999 - 21:49:13 EEST)
Re: New LIPTOOL web-site / Questions re. die casting, RT, etc. Steven (Wed Apr 07 1999 - 22:08:02 EEST)
RE: SGI Monitors James Ogg (Wed Apr 07 1999 - 22:29:59 EEST)
SGI monitors to PCs DANIEL CHARLES DAVIS (Thu Apr 08 1999 - 03:55:59 EEST)
Re: SGI Monitors ATiburon@aol.com (Thu Apr 08 1999 - 03:48:51 EEST)
More info on freeze cast process (FCP), ATTN: Andy Scott Monica & Glenn Whiteside (Thu Apr 08 1999 - 03:56:48 EEST)
3D scanning for Gears Monica & Glenn Whiteside (Thu Apr 08 1999 - 04:03:34 EEST)
RE: More info on freeze cast process (FCP), ATTN: Andy Scott DANIEL CHARLES DAVIS (Thu Apr 08 1999 - 05:05:43 EEST)
re:Plastic powders Christopher Charles Ainslev (Dr) (Thu Apr 08 1999 - 05:18:24 EEST)
Thank you to all those who replied Raymond Lee (Thu Apr 08 1999 - 05:33:05 EEST)
RE: Plastic powders Du Zhaohui (Dr) (Thu Apr 08 1999 - 05:56:00 EEST)
Pinna Simulator James Sanders (Thu Apr 08 1999 - 09:54:01 EEST)
(no subject) James Sanders (Thu Apr 08 1999 - 10:42:53 EEST)
Re: New LIPTOOL web-site / Questions re. die casting, RT, etc. Nick Osborn (Thu Apr 08 1999 - 11:20:45 EEST)
Lawson article on the ASME homepage Linda Johnson (Thu Apr 08 1999 - 16:42:02 EEST)
Anyone heard of this? michael rees (Thu Apr 08 1999 - 19:38:23 EEST)
New Website @ www.cemcom.com Kevan_Jones@cemcom.com (Thu Apr 08 1999 - 20:17:45 EEST)
Rapid Prototyping and Manufacturing 99 at Chicago Rafael Santillan (Thu Apr 08 1999 - 21:16:16 EEST)
Re: Rapid Prototyping and Manufacturing 99 at Chicago Elaine Hunt (Thu Apr 08 1999 - 21:03:36 EEST)
Watch the development via the Internet.... Rudolf Schenker (Thu Apr 08 1999 - 21:09:23 EEST)
Re: Rapid Prototyping and Manufacturing 99 at Chicago Doug Mitchell (Thu Apr 08 1999 - 21:26:10 EEST)
Re: Rapid Prototyping and Manufacturing 99 at Chicago Alain BERNARD (Thu Apr 08 1999 - 21:31:17 EEST)
Please remove my name from the RP mail list. Douglas DeLong (Thu Apr 08 1999 - 22:11:10 EEST)
Educational Events Meghan Wolf (Fri Apr 09 1999 - 00:32:01 EEST)
YAZAKI OPERATOR SIBCOINC@aol.com (Fri Apr 09 1999 - 00:35:29 EEST)
Re: Rapid Prototyping and Manufacturing 99 at Chicago Marshall Burns (Fri Apr 09 1999 - 03:15:16 EEST)
Re: Watch the development via the Internet.... Monica & Glenn Whiteside (Fri Apr 09 1999 - 07:01:18 EEST)
Re: More info on freeze cast process (FCP), ATTN: Andy Scott Monica & Glenn Whiteside (Fri Apr 09 1999 - 07:12:10 EEST)
Re: Anyone heard of this? Stanley Lechtzin (Fri Apr 09 1999 - 07:15:02 EEST)
Re: 3D scanning for Gears Shreyas J Bakshi (Fri Apr 09 1999 - 08:15:32 EEST)
(no subject) Xiang Fang (Fri Apr 09 1999 - 11:20:30 EEST)
Sintering temps and atmospheres Chris Sutcliffe (Fri Apr 09 1999 - 11:30:44 EEST)
info request Murat Savkilioglu (Fri Apr 09 1999 - 11:45:18 EEST)
Linear Temp Coefficient of SL5180 Ross Nicholls (Fri Apr 09 1999 - 12:36:28 EEST)
Re: Linear Temp Coefficient of SL5180 Sadegh Rahmati (Fri Apr 09 1999 - 15:30:58 EEST)
Re: More info on freeze cast process (FCP), ATTN: Andy Scott Bradley VanDike (Fri Apr 09 1999 - 16:09:38 EEST)
MIM with brass, bronze, ... Bauer Juergen (Fri Apr 09 1999 - 15:04:52 EEST)
test mail from matt over the internet matt lodder (Fri Apr 09 1999 - 17:02:46 EEST)
test mail over internet 2 matt lodder (Fri Apr 09 1999 - 17:05:13 EEST)
Re: More info on freeze cast process (FCP), ATTN: Andy Scott aaroflex (Fri Apr 09 1999 - 18:07:59 EEST)
Meeting lonepeak (Fri Apr 09 1999 - 17:30:31 EEST)
RP Vendors at Northwest Machine tool show in Tacoma WA Robert Jaquiss (Fri Apr 09 1999 - 17:58:22 EEST)
Re: Anyone heard of this? Marshall Burns (Fri Apr 09 1999 - 18:11:19 EEST)
RE: RP Vendors at Northwest Machine tool show in Tacoma WA Rebensdorf, Steven (Fri Apr 09 1999 - 18:50:39 EEST)
Test message-Please delete Kevan_Jones@cemcom.com (Fri Apr 09 1999 - 18:56:25 EEST)
Time Digital and The Boston Cyberarts Festival michael rees (Fri Apr 09 1999 - 19:28:02 EEST)
[Fwd: metal casting vendors] Ngee Lee (Fri Apr 09 1999 - 14:03:01 EEST)
New web site address Michelle P. Wyatt (Thu Apr 08 1999 - 21:23:10 EEST)
RPML meeting Elaine Hunt (Fri Apr 09 1999 - 21:52:44 EEST)
Re: More info on freeze cast process (FCP), ATTN: Andy Scott Brent Hickel (Fri Apr 09 1999 - 21:54:12 EEST)
Employment Opportunity Glyn Churchman (Fri Apr 09 1999 - 23:59:52 EEST)
Re:Freeze Casting water that is boiling Foamcaster@aol.com (Sat Apr 10 1999 - 00:40:56 EEST)
Re: RPML meeting Rafael Santillan (Sat Apr 10 1999 - 01:55:45 EEST)
RE: Freeze Casting water that is boiling DANIEL CHARLES DAVIS (Sat Apr 10 1999 - 04:26:45 EEST)
Low priced RP (was RE: Meeting) DANIEL CHARLES DAVIS (Sat Apr 10 1999 - 04:40:06 EEST)
Off-topic - RE: Friday Funnies Monica & Glenn Whiteside (Sat Apr 10 1999 - 04:34:13 EEST)
Rapid Tooling Symposium Announcement Donald Sebastian (Sat Apr 10 1999 - 04:42:58 EEST)
Re: RPML meeting B. J. Arnold-Feret (Sat Apr 10 1999 - 09:13:19 EEST)
Re: Low priced RP (was RE: Meeting) RoyJRATC@aol.com (Sun Apr 11 1999 - 20:25:57 EEST)
(no subject) ndminc (Mon Apr 12 1999 - 05:02:33 EEST)
I don't drink beer - but I do eat pizza Ian Gibson (Mon Apr 12 1999 - 04:30:47 EEST)
Re: I don't drink beer - but I do eat pizza Rafael Santillan (Mon Apr 12 1999 - 05:35:51 EEST)
ת��: More info on freeze cast process (FCP), ATTN: Andy Scott tjrpt (Mon Apr 12 1999 - 10:00:01 EEST)
ת��: Employment Opportunity tjrpt (Mon Apr 12 1999 - 10:20:55 EEST)
Digibotics Booth at the RP Show Elizabeth Nitz (Mon Apr 12 1999 - 16:03:24 EEST)
(no subject) Marco Ravera (Mon Apr 12 1999 - 17:09:28 EEST)
RPML Meeting Elizabeth Nitz (Mon Apr 12 1999 - 19:44:31 EEST)
conversion between stl and other 3d file formats Jan Stifter (Mon Apr 12 1999 - 20:13:38 EEST)
Comments - low cost SLA parts lonepeak (Mon Apr 12 1999 - 20:25:24 EEST)
RP-ML logo at Rosemont. Cost & Value of RP Mark Littlewood (Mon Apr 12 1999 - 20:46:56 EEST)
DRIVE BELT FOR SLA500 SWEEPER ARM SIBCOINC@aol.com (Mon Apr 12 1999 - 21:31:59 EEST)
Re: Fusioneng@aol.com (Mon Apr 12 1999 - 21:35:34 EEST)
LOM Survey Agarwala, Mukesh K. (Mon Apr 12 1999 - 21:49:14 EEST)
Magics RP Software Tutorials SME Rapid Prototyping and Manufactur ing Conference Chicago Mark Bliek (Mon Apr 12 1999 - 22:25:20 EEST)
RPML Show Elizabeth Nitz (Mon Apr 12 1999 - 22:41:02 EEST)
OFF TOPIC: The great "Gas Out" Gabe Clark (Mon Apr 12 1999 - 22:41:37 EEST)
RP Mail List Rolf Hubert (Mon Apr 12 1999 - 23:37:26 EEST)
Re: Comments - low cost SLA parts B. J. Arnold-Feret (Tue Apr 13 1999 - 00:13:49 EEST)
Re: Comments - low cost SLA parts Jim Payne (Tue Apr 13 1999 - 01:40:00 EEST)
Re: OFF TOPIC: The great "Gas Out" Kevan_Jones@cemcom.com (Tue Apr 13 1999 - 01:46:56 EEST)
RE: OFF TOPIC: The great "Gas Out" Prof. P M Dickens (Tue Apr 13 1999 - 10:19:37 EEST)
RE:Comments-low cost SLA parts Gruppo Promau - Area Marketing (Tue Apr 13 1999 - 12:49:53 EEST)
RE: OFF TOPIC: The great "Gas Out" b.Kooijmans@ind.tno.nl (Tue Apr 13 1999 - 12:10:27 EEST)
Remove from list julie@boyce.com Julie (Tue Apr 13 1999 - 15:03:23 EEST)
Change in email addresses for DSM Somos(R) members Michelle P. Wyatt (Tue Apr 13 1999 - 16:35:12 EEST)
Re: OFF TOPIC: The great "Gas Out" PnRMolds@aol.com (Tue Apr 13 1999 - 17:28:24 EEST)
sintered delrin RoyJRATC@aol.com (Tue Apr 13 1999 - 22:58:54 EEST)
re: sintered delrin bvanhiel@nordson.com (Tue Apr 13 1999 - 23:40:54 EEST)
A unique and comprehensive program focusing on the technology, processes and equipment for Extrusion! Marina Shara (Wed Apr 14 1999 - 00:11:50 EEST)
A unique and comprehensive program focusing on the technology, processes and equipment for extrusion! Marina Shara (Wed Apr 14 1999 - 00:36:41 EEST)
Remove from list p7471432c@ntu.edu.sg #Liew Choon Liong# (Wed Apr 14 1999 - 04:22:10 EEST)
RE: OFF TOPIC: The great "Gas Out" Gabe Clark (Wed Apr 14 1999 - 05:29:00 EEST)
Off-topic, RE: The English language Monica & Glenn Whiteside (Wed Apr 14 1999 - 07:57:05 EEST)
RE: OFF TOPIC: The great "Gas Out" LAST Rafael Santillan (Wed Apr 14 1999 - 08:15:34 EEST)
RE: OFF TOPIC: The great "Gas Out" Prof. P M Dickens (Wed Apr 14 1999 - 10:30:54 EEST)
RE: OFF TOPIC: The great "Gas Out" stephen.windsor@roverpte.demon.co.uk (Wed Apr 14 1999 - 10:47:50 EEST)
Off-topic, RE: The English language Andrzejewski, Jan (Wed Apr 14 1999 - 11:38:24 EEST)
RPML logo Elaine Hunt (Wed Apr 14 1999 - 14:55:20 EEST)
Remove from list julie@boyce.com Julie (Wed Apr 14 1999 - 15:49:40 EEST)
Improved Accuracy Tools MR ALBIN A HASTBACKA (Wed Apr 14 1999 - 14:50:51 EEST)
Solid Imager Training Program aaroflex (Wed Apr 14 1999 - 19:10:56 EEST)
logo file Elaine Hunt (Wed Apr 14 1999 - 20:34:48 EEST)
Re: Improved Accuracy Tools Christian_Nelson/DTM@dtm-corp.com (Wed Apr 14 1999 - 21:32:26 EEST)
Re: Improved Accuracy Tools cthomas@eng.utah.edu (Wed Apr 14 1999 - 21:49:31 EEST)
Re: sintered delrin Robert Welther (Thu Apr 15 1999 - 03:55:39 EEST)
Wavelength/ frequency of UV light of Solider System Puneet Tandon (Thu Apr 15 1999 - 12:01:41 EEST)
STL files Sandra Alemany Mut (Wed Apr 15 1998 - 11:23:30 EEST)
Re: Comments-low cost SLA parts francois (Fri Apr 16 1999 - 04:03:50 EEST)
SEEKING BROKER OF MULTIPLE RP SERVICES Derek Morton (Fri Apr 16 1999 - 03:55:59 EEST)
Re: Comments-low cost SLA parts Mark Lee (Thu Apr 15 1999 - 13:28:21 EEST)
Fwd: STL files Elaine Hunt (Thu Apr 15 1999 - 14:39:26 EEST)
Re: Comments - low cost SLA parts B. J. Arnold-Feret (Thu Apr 15 1999 - 16:25:17 EEST)
RE: STL files b.Kooijmans@ind.tno.nl (Thu Apr 15 1999 - 16:38:03 EEST)
Re: STL files Paul Hettrick (Thu Apr 15 1999 - 18:18:45 EEST)
R: STL files Sandro Marta (Thu Apr 15 1999 - 17:30:40 EEST)
RE: Improved Accuracy Tools will pattison (Thu Apr 15 1999 - 17:33:53 EEST)
Meeting Chicago Show Rafael Santillan (Thu Apr 15 1999 - 18:47:07 EEST)
Fwd: Meeting Chicago Show Elaine Hunt (Thu Apr 15 1999 - 18:24:50 EEST)
Meeting Chicago - Pizza & Beer Wednesday Evening Mark Littlewood (Thu Apr 15 1999 - 19:01:25 EEST)
RE: STL files LeeDock@ibm.net (Thu Apr 15 1999 - 19:30:24 EEST)
Re: STL files Douglas Bucci (Thu Apr 15 1999 - 20:12:23 EEST)
Re: Meeting Chicago Show Alain BERNARD (Thu Apr 15 1999 - 20:23:53 EEST)
Re: SEEKING BROKER OF MULTIPLE RP SERVICES Marshall Burns (Thu Apr 15 1999 - 20:23:44 EEST)
Re: Meeting Chicago - Pizza & Beer Wednesday Evening Beth P Israelnaim (Thu Apr 15 1999 - 20:34:43 EEST)
RE: sintered delrin Jim Williams (Thu Apr 15 1999 - 17:18:09 EEST)
SUMMARY Meeting Chicago Show (DELETE IF YOU ARE NOT GOING TO CHICAGO) Rafael Santillan (Fri Apr 16 1999 - 02:43:06 EEST)
RE: Cubital 5600 Fauzi (Fri Apr 16 1999 - 07:19:38 EEST)
Off-topic: RE: Friday funnies, Budweiser Squirrel Monica & Glenn Whiteside (Fri Apr 16 1999 - 07:23:18 EEST)
Cubital Fauzi (Fri Apr 16 1999 - 09:30:44 EEST)
RE: Cubital DANIEL CHARLES DAVIS (Fri Apr 16 1999 - 10:55:33 EEST)
Cubital fauzi hashim (Fri Apr 16 1999 - 11:28:17 EEST)
Re: Cubital 5600 Marshall Burns (Fri Apr 16 1999 - 13:11:15 EEST)
RP and M Graphics ~ Clearsight Strategy ~ (Fri Apr 16 1999 - 16:57:51 EEST)
to get you in the mood Elaine Hunt (Fri Apr 16 1999 - 16:46:43 EEST)
Laser recharging/replacement ? Simon Slater (Fri Apr 16 1999 - 17:31:44 EEST)
Re: Cubital Resins Brandon R. Ferguson (Fri Apr 16 1999 - 18:10:05 EEST)
RE: Cubital 5600 Puneet Tandon (Fri Apr 16 1999 - 17:17:52 EEST)
SL 5170 For Sale Eric Stern (Sat Apr 17 1999 - 19:26:14 EEST)
RPML meeting Elaine Hunt (Fri Apr 16 1999 - 20:09:08 EEST)
RE: Improved Accuracy Tools cthomas@eng.utah.edu (Fri Apr 16 1999 - 22:01:49 EEST)
Do not download! Logo for Mark Bliek. no other email address. Mark Littlewood (Fri Apr 16 1999 - 22:41:18 EEST)
For the ones that CAN�T make if for wednsday meeting !!! Rafael Santillan (Sat Apr 17 1999 - 03:26:56 EEST)
Re: Laser recharging/replacement ? Megsinet (Sat Apr 17 1999 - 09:00:45 EEST)
Re: Laser recharging/replacement ? CORRECTION! Megsinet (Sun Apr 18 1999 - 08:22:43 EEST)
Product Development and Manufacturing Communities ~ Clearsight Strategy ~ (Sun Apr 18 1999 - 14:20:26 EEST)
Please cancel my service Cheng-Hsin Liu (Sun Apr 18 1999 - 13:49:34 EEST)
Re: For the ones that CAN�T make if for wednsday meeting !!! B. J. Arnold-Feret (Sun Apr 18 1999 - 18:11:40 EEST)
SLS glass duraform Drew Brown (Sun Apr 18 1999 - 18:34:29 EEST)
RE: SLS glass duraform SWANK, WILLIAM E. (Mon Apr 19 1999 - 17:08:06 EEST)
RE: Improved Accuracy Tools will pattison (Mon Apr 19 1999 - 16:38:57 EEST)
Read this if you are Gary Fudge, otherwise delete Ron Clemons (Mon Apr 19 1999 - 10:47:48 EEST)
FREE Coin sample - LIPTOOL at Solid Modelling '99 Nick Osborn (Mon Apr 19 1999 - 17:03:03 EEST)
Re: Laser recharging/replacement ? Ross Gates (Mon Apr 19 1999 - 15:38:52 EEST)
Re: Product Development and Manufacturing Communities bo yang me stnt (Mon Apr 19 1999 - 20:04:43 EEST)
Please cancel my rp subscription Cheng-Hsin Liu (Mon Apr 19 1999 - 20:10:43 EEST)
Sat file reading problem Emil Marais (Mon Apr 19 1999 - 20:43:39 EEST)
Re: Laser recharging/replacement ? ATiburon@aol.com (Tue Apr 20 1999 - 02:11:40 EEST)
Re: Laser recharging/replacement ? Megsinet (Tue Apr 20 1999 - 08:35:56 EEST)
(Fwd) GARPA Newsletter Mnr. D de Beer (Tue Apr 20 1999 - 10:35:23 EEST)
C-Mold DANIEL CHARLES DAVIS (Wed Apr 21 1999 - 10:59:28 EEST)
RE: C-Mold Quickfill DANIEL CHARLES DAVIS (Wed Apr 21 1999 - 12:34:38 EEST)
Fred Steinbauer Pressley, Rick (Wed Apr 21 1999 - 16:32:04 EEST)
Tooling Quotations With RP Model Supplied rjensen@parker.com (Wed Apr 21 1999 - 22:58:41 EEST)
ANyone Knows a site on latest RP papers Bharath Vasudeva Rao (Thu Apr 22 1999 - 00:33:02 EEST)
please remove me from the list Bert Sobanik (Thu Apr 22 1999 - 02:07:09 EEST)
Re: Improved Accuracy Tools stefan.ronnlund@notes.electrolux.fi (Thu Apr 22 1999 - 16:23:29 EEST)
Re: Improved Accuracy Tools Bert VandenBerg (Thu Apr 22 1999 - 17:02:53 EEST)
FW: Fred's Services Pressley, Rick (Thu Apr 22 1999 - 15:31:16 EEST)
pre-friday humor: Golf is not easy... Bauer Juergen (Thu Apr 22 1999 - 17:54:48 EEST)
FW: Mail failure Pressley, Rick (Thu Apr 22 1999 - 18:13:17 EEST)
99 SME Conference Karl Denton (Thu Apr 22 1999 - 19:27:37 EEST)
Re: Improved Accuracy Tools cthomas@eng.utah.edu (Thu Apr 22 1999 - 19:22:22 EEST)
Re: SLS glass duraform Vern Carter (Thu Apr 22 1999 - 20:57:09 EEST)
Re: Improved Accuracy Tools Paul J. Burr (Thu Apr 22 1999 - 19:42:52 EEST)
Re: Improved Accuracy Tools Rolf Hubert (Thu Apr 22 1999 - 20:24:06 EEST)
Re: 99 SME Conference James P. Harrison (Thu Apr 22 1999 - 22:03:47 EEST)
"State of the Industry" harvest@harvest-tech.com (Fri Apr 23 1999 - 00:48:05 EEST)
For Immiadiate Release Karl Denton (Fri Apr 23 1999 - 01:35:40 EEST)
Conference proceedings from the Austin FFF symposium Karl Denton (Fri Apr 23 1999 - 02:20:44 EEST)
Ask for info. shirong@oita-ri.go.jp (Fri Apr 23 1999 - 03:07:42 EEST)
Re: 99 SME Conference Chuck Alexander (Fri Apr 23 1999 - 04:17:42 EEST)
RE: 99 SME Conference Karl Denton (Fri Apr 23 1999 - 05:16:07 EEST)
RP Benchmarking Gerard Ryder (Fri Apr 23 1999 - 14:17:24 EEST)
Fred Steinbauer, The passing of a dinasaur Elaine Hunt (Fri Apr 23 1999 - 15:37:00 EEST)
Re: Fred Steinbauer, The passing of a dinosaur Guy.Bourdeau@coulter.com (Fri Apr 23 1999 - 16:50:00 EEST)
The Wohler Chasm Elaine Hunt (Fri Apr 23 1999 - 17:06:25 EEST)
Re: Fred Steinbauer, The passing of a dinosaur James P. Harrison (Fri Apr 23 1999 - 17:41:30 EEST)
RE: 99 SME Conference B. J. Arnold-Feret (Fri Apr 23 1999 - 17:43:51 EEST)
Re: Improved Accuracy Tools Tom Richards (Fri Apr 23 1999 - 22:27:40 EEST)
Re: Tooling Quotations With RP Model Supplied Tom Richards (Fri Apr 23 1999 - 22:22:58 EEST)
bead blasting Jordan Joseph W DLPC (Fri Apr 23 1999 - 19:50:53 EEST)
Confused Steven (Fri Apr 23 1999 - 19:56:00 EEST)
Re: Conference proceedings from the Austin FFF symposium Christian_Nelson/DTM@dtm-corp.com (Fri Apr 23 1999 - 21:28:39 EEST)
Re: Confused michael rees (Fri Apr 23 1999 - 22:43:28 EEST)
Ciba and Z Corp Announce Partnership Kate Moore (Fri Apr 23 1999 - 23:22:08 EEST)
Ciba and Z Corp Announce Partnership Kate Moore (Fri Apr 23 1999 - 23:40:23 EEST)
DTM Trueform material DPT-Fast (Mike) (Sat Apr 24 1999 - 00:38:56 EEST)
Re: RP Benchmarking aaroflex (Sat Apr 24 1999 - 01:53:14 EEST)
Re: Confused lblasch@opw-fc.com (Fri Apr 23 1999 - 17:35:02 EEST)
Re: Ask for info. aaroflex (Sat Apr 24 1999 - 02:00:01 EEST)
Analyze Parts aaroflex (Sat Apr 24 1999 - 02:27:11 EEST)
Re: Confused Steven (Sat Apr 24 1999 - 01:53:51 EEST)
RE: RP Benchmarking Geoff Smith-Moritz (Sat Apr 24 1999 - 01:56:31 EEST)
Re: Confused rjensen@parker.com (Sat Apr 24 1999 - 02:03:33 EEST)
Why is CAD hard? Marshall Burns (Sat Apr 24 1999 - 03:07:49 EEST)
Re: Tooling Quotations With RP Model Supplied Fusioneng@aol.com (Sat Apr 24 1999 - 05:17:40 EEST)
Re: Ciba and Z Corp Announce Partnership Fusioneng@aol.com (Sat Apr 24 1999 - 05:51:24 EEST)
Re: RP Benchmarking Fusioneng@aol.com (Sat Apr 24 1999 - 06:00:46 EEST)
Re:Confused & 99 Conference Shreyas J Bakshi (Sat Apr 24 1999 - 09:25:31 EEST)
SLA500 wanted DANIEL CHARLES DAVIS (Sat Apr 24 1999 - 10:19:39 EEST)
'99 conference & confused - rapid milling? T Schuett (Sat Apr 24 1999 - 17:11:37 EEST)
RE: 99 SME Conference Joe Frantz (Sat Apr 24 1999 - 17:44:30 EEST)
Re: RP Mold Tooling and CNC/EDM Progress Britt Ferrill (Sun Apr 25 1999 - 02:54:15 EEST)
About biomedical engineering Hyun-Pung Park (Sun Apr 25 1999 - 08:29:56 EEST)
Terry and SME Conf. Prof. P M Dickens (Sat Apr 24 1999 - 16:39:33 EEST)
RE: Tooling Quotations With RP Model Supplied, ATTN: Bob Morton Monica & Glenn Whiteside (Sun Apr 25 1999 - 23:37:18 EEST)
RE: Confused Monica & Glenn Whiteside (Sun Apr 25 1999 - 23:49:48 EEST)
SME Conf. Paul Burr (Mon Apr 26 1999 - 00:27:46 EEST)
Re: Confused B. J. Arnold-Feret (Mon Apr 26 1999 - 00:47:48 EEST)
RE: Tooling Quotations With RP Model Supplied, ATTN: Bob Morton Bauer Juergen (Mon Apr 26 1999 - 13:15:08 EEST)
Rapid Pattern Maker MR ALBIN A HASTBACKA (Mon Apr 26 1999 - 13:06:48 EEST)
Re: '99 conference & confused - rapid milling? MR ALBIN A HASTBACKA (Mon Apr 26 1999 - 13:06:51 EEST)
RE: '99 conference & confused - rapid milling? T Schuett (Mon Apr 26 1999 - 16:12:46 EEST)
X-Ray Scanning services Rajat VSNL (Mon Apr 26 1999 - 17:34:23 EEST)
Re: Tooling Quotations With RP Model Supplied, ATTN: Bob Morton Fusioneng@aol.com (Mon Apr 26 1999 - 17:47:24 EEST)
benchmarking Elaine Hunt (Mon Apr 26 1999 - 18:31:47 EEST)
Forwarding an Inbound Mail File due to Server Problem Bernice Dennard (Mon Apr 26 1999 - 18:50:26 EEST)
Re: X-Ray Scanning services Tom Richards (Mon Apr 26 1999 - 22:30:48 EEST)
Low cost RP... lblasch@opw-fc.com (Mon Apr 26 1999 - 12:03:49 EEST)
Re: RP Benchmarking aaroflex (Tue Apr 27 1999 - 01:27:30 EEST)
dinasaurs (food for thought) Elaine Hunt (Tue Apr 27 1999 - 15:10:46 EEST)
Re: Low cost RP... Lee Eisinger (Tue Apr 27 1999 - 15:58:31 EEST)
Wohler's Executive Summary Todd Grimm (Tue Apr 27 1999 - 16:04:10 EEST)
RE: dinosaurs (food for thought) Deak, Steve (Tue Apr 27 1999 - 16:58:48 EEST)
evaluation Alex Smirnov (Tue Apr 27 1999 - 17:13:36 EEST)
RE: dinosaurs (food for thought) Guy.Bourdeau@coulter.com (Tue Apr 27 1999 - 17:37:39 EEST)
effective booth selling during RP&M B. J. Arnold-Feret (Tue Apr 27 1999 - 18:46:34 EEST)
RE: Wohler's Executive Summary Karl Denton (Tue Apr 27 1999 - 19:21:36 EEST)
Light Year? Scott -Scooter- Sutterer (Tue Apr 27 1999 - 19:53:54 EEST)
Re: evaluation cwho (Tue Apr 27 1999 - 20:12:29 EEST)
Re: effective booth selling during RP&M Carol Farrish (Tue Apr 27 1999 - 20:29:30 EEST)
RE: Light Year? Steve Stewart (Tue Apr 27 1999 - 20:31:07 EEST)
Requesting Statistical Process Control Models for the SLS Mitchell J. A (Tue Apr 27 1999 - 20:36:21 EEST)
effective booth selling during RP&M Steven (Tue Apr 27 1999 - 20:39:28 EEST)
Re: Light Year? Todd Reese (Tue Apr 27 1999 - 22:46:59 EEST)
attitude adjustments Elaine Hunt (Tue Apr 27 1999 - 20:59:34 EEST)
Re: RP Benchmarking aaroflex (Tue Apr 27 1999 - 22:17:49 EEST)
evolution of RP market Alain BERNARD (Tue Apr 27 1999 - 21:52:47 EEST)
Re: RE: Light Year? JimHerten@aol.com (Tue Apr 27 1999 - 23:45:43 EEST)
SL5180 for sale Archie Swanner (Tue Apr 27 1999 - 23:50:34 EEST)
Re: effective booth selling during RP&M Rafael Santillan (Wed Apr 28 1999 - 00:54:09 EEST)
SOTI Report at SME Lightman, Allan J (Wed Apr 28 1999 - 00:48:50 EEST)
Converting DXF to STL Mitchell J. A (Wed Apr 28 1999 - 01:39:11 EEST)
Re: Low cost RP... Paul Burr (Wed Apr 28 1999 - 02:45:30 EEST)
RE: effective booth selling during RP&M DANIEL CHARLES DAVIS (Wed Apr 28 1999 - 06:40:52 EEST)
SLC File format Bharath Vasudeva Rao (Wed Apr 28 1999 - 09:07:42 EEST)
RE: SLC File format (long) DANIEL CHARLES DAVIS (Wed Apr 28 1999 - 10:12:49 EEST)
RE: SOTI Report at SME KDenton@williams-int.com (Wed Apr 28 1999 - 15:26:54 EEST)
Terry's report Elaine Hunt (Wed Apr 28 1999 - 15:41:45 EEST)
Re: SOTI Report at SME Mike Vincek (Wed Apr 28 1999 - 16:01:04 EEST)
First DLP HDTV announcement Elaine Hunt (Wed Apr 28 1999 - 16:15:13 EEST)
3D RP Patents Special Edition ChathamRes@aol.com (Wed Apr 28 1999 - 16:31:56 EEST)
RE: SOTI Report at SME Lightman, Allan J (Wed Apr 28 1999 - 16:36:51 EEST)
RE: '99 conference & confused - rapid milling? Jim Williams (Wed Apr 28 1999 - 16:39:47 EEST)
Re: First DLP HDTV announcement David K. Leigh (Wed Apr 28 1999 - 16:57:15 EEST)
Compression Sale Ray Thompson (Wed Apr 28 1999 - 16:52:53 EEST)
Re: First DLP HDTV announcement Chris Sutcliffe (Wed Apr 28 1999 - 16:56:58 EEST)
RE: First DLP HDTV announcement Lightman, Allan J (Wed Apr 28 1999 - 17:24:55 EEST)
Re: effective booth selling during RP&M Doug Mitchell (Wed Apr 28 1999 - 17:30:21 EEST)
[q] 3D camera from Minolta ?? Brian chen (Wed Apr 28 1999 - 17:50:02 EEST)
[q] 3D camera from Minolta ?? Brian chen (Wed Apr 28 1999 - 17:49:03 EEST)
RE: SOTI Report at SME Lightman, Allan J (Wed Apr 28 1999 - 17:46:35 EEST)
State of the Industry Terry T. Wohlers (Wed Apr 28 1999 - 18:17:47 EEST)
Sizing up a customer by their mode of dress Steven (Wed Apr 28 1999 - 18:41:49 EEST)
RE: State of the Industry KDenton@williams-int.com (Wed Apr 28 1999 - 19:03:27 EEST)
RE: SOTI Report at SME KDenton@williams-int.com (Wed Apr 28 1999 - 19:01:28 EEST)
RE: SOTI Report at SME Lightman, Allan J (Wed Apr 28 1999 - 18:58:53 EEST)
Re: SLC File format (long) Bill Loyd (Wed Apr 28 1999 - 19:32:36 EEST)
Re: Sizing up a customer by their mode of dress SCat3D@aol.com (Wed Apr 28 1999 - 19:55:25 EEST)
Re: [q] 3D camera from Minolta ?? Douglas Bucci (Wed Apr 28 1999 - 20:01:32 EEST)
Re: Sizing up a customer by their mode of dress harvest@harvest-tech.com (Wed Apr 28 1999 - 14:21:35 EEST)
Re: Compression Sale Jim Vander Linden (Wed Apr 28 1999 - 21:26:48 EEST)
RE: SOTI Report at SME Jim Williams (Wed Apr 28 1999 - 21:20:34 EEST)
3D Users Group Golf Outing Bob Dzugan (Wed Apr 28 1999 - 22:33:07 EEST)
RE: Terry's report Jim Williams (Wed Apr 28 1999 - 21:26:13 EEST)
RE: SOTI Report at SME Jim Williams (Wed Apr 28 1999 - 21:37:44 EEST)
RE: SOTI Report at SME Jim Williams (Wed Apr 28 1999 - 21:48:20 EEST)
RE: Wohler's Executive Summary Jim Williams (Wed Apr 28 1999 - 22:15:23 EEST)
Re: Converting DXF to STL Delft Spline Systems (Wed Apr 28 1999 - 22:14:48 EEST)
Re: Compression Sale Drew Brown (Wed Apr 28 1999 - 23:03:04 EEST)
3D Users Group Golf Outing Bob Dzugan (Thu Apr 29 1999 - 00:05:07 EEST)
Re: Converting DXF to STL Tom Vorgitch (Wed Apr 28 1999 - 23:39:21 EEST)
Contact number for Brock Rooney needed. Robert Gologranc (Thu Apr 29 1999 - 00:23:20 EEST)
Re: Sizing up a customer by their mode of dress Vern Carter (Thu Apr 29 1999 - 02:34:39 EEST)
Re: Sizing up a customer by their mode of dress Mike Naylon (Thu Apr 29 1999 - 01:21:03 EEST)
Wind Tunnel Design and RP models Monica & Glenn Whiteside (Thu Apr 29 1999 - 03:09:38 EEST)
Michael W Miller's Beamcomp.stl File francois (Thu Apr 29 1999 - 20:48:12 EEST)
Michael W Miller's Beamcomp.stl File francois (Thu Apr 29 1999 - 21:43:29 EEST)
RE: Sizing up a customer by their mode of dress Hurley, Lynda J (Thu Apr 29 1999 - 14:54:24 EEST)
Re: Sizing up a customer by their mode of dress Sales@MLF (Thu Apr 29 1999 - 16:18:18 EEST)
Re: Sizing up a customer by their mode of dress Steven Pollack (Thu Apr 29 1999 - 16:46:23 EEST)
SGI NT workstations ( the continuing saga ) Fusioneng@aol.com (Thu Apr 29 1999 - 17:11:22 EEST)
DTM - Profit? Trevor James (Thu Apr 29 1999 - 17:31:38 EEST)
Re: Sizing up a customer by their mode of dress E.M. Groenewolt (Thu Apr 29 1999 - 17:30:33 EEST)
booth salesmanship B. J. Arnold-Feret (Thu Apr 29 1999 - 18:21:04 EEST)
NEW Message: Part 2 of Converting *.dxf to *.stl Mitchell J. A (Thu Apr 29 1999 - 19:29:35 EEST)
Re: NEW Message: Part 2 of Converting *.dxf to *.stl Bert VandenBerg (Thu Apr 29 1999 - 20:33:58 EEST)
[Fwd: NEW Message: Part 2 of Converting *.dxf to *.stl] Bert VandenBerg (Thu Apr 29 1999 - 21:01:51 EEST)
Re: NEW Message: Part 2 of Converting *.dxf to *.stl Bharath Vasudeva Rao (Thu Apr 29 1999 - 22:18:21 EEST)
Off-topic, RE: Friday funnies Monica & Glenn Whiteside (Fri Apr 30 1999 - 00:51:43 EEST)
RE: Wind Tunnel Design and RP models stephen.windsor@roverpte.demon.co.uk (Fri Apr 30 1999 - 10:43:49 EEST)
Re: Confused Priit Kull (Fri Apr 30 1999 - 16:07:07 EEST)
Re: NEW Message: Part 2 of Converting *.dxf to *.stl Rafael Santillan (Fri Apr 30 1999 - 17:39:30 EEST)
new virus "How to Give a Cat a Colonic," Jack Feng (Fri Apr 30 1999 - 17:09:03 EEST)
Re: new virus "How to Give a Cat a Colonic," Kevan_Jones@cemcom.com (Fri Apr 30 1999 - 18:01:24 EEST)
RE: new virus "How to Give a Cat a Colonic," Brent Stucker (Fri Apr 30 1999 - 18:15:11 EEST)
Re: new virus "How to Give a Cat a Colonic," Scott -Scooter- Sutterer (Fri Apr 30 1999 - 19:04:17 EEST)
Employment Opportunity Michael Tsenter (Fri Apr 30 1999 - 20:04:14 EEST)
Ignored Michael Hirschmann (Fri Apr 30 1999 - 20:55:13 EEST)
Looking for John Miller KDenton@williams-int.com (Fri Apr 30 1999 - 20:58:53 EEST)
RE: Ignored Sabino Mata (Fri Apr 30 1999 - 21:36:58 EEST)
Re: Ignored Bill Loyd (Fri Apr 30 1999 - 21:56:13 EEST)
Compression Auction Vern Carter (Sat May 01 1999 - 01:41:53 EEST)
Re: Confused Marshall Burns (Sat May 01 1999 - 02:10:33 EEST)
Re: Light Year? ATiburon@aol.com (Sat May 01 1999 - 02:48:50 EEST)
RE: Compression Auction Monica & Glenn Whiteside (Sat May 01 1999 - 04:18:17 EEST)
Brain needed Charles Overy (Sat May 01 1999 - 08:53:22 EEST)
Re: Brain needed Paul Burr (Sat May 01 1999 - 15:03:32 EEST)
Re: Confused Steven (Sat May 01 1999 - 17:45:49 EEST)
5180 resin General Pattern (Sat May 01 1999 - 19:22:13 EEST)
Rhino News - April 1999 Bob McNeel (Fri Apr 30 1999 - 01:39:31 EEST)
test George Hunt (Sun May 02 1999 - 01:49:41 EEST)
RE: First DLP HDTV announcement Brock Hinzmann (Sun May 02 1999 - 03:40:06 EEST)
RE: SOTI Report at SME Brock Hinzmann (Sun May 02 1999 - 04:56:07 EEST)
Re: Brain needed Christian_Nelson/DTM@dtm-corp.com (Sun May 02 1999 - 05:20:02 EEST)
Re: First DLP HDTV announcement Marshall Burns (Sun May 02 1999 - 05:17:34 EEST)
No shortage of Brains Charles Overy (Sun May 02 1999 - 08:28:35 EEST)
Re: First DLP HDTV announcement Brock Hinzmann (Mon May 03 1999 - 02:45:36 EEST)
rapid prototyping in the uk andy (Mon May 03 1999 - 02:32:04 EEST)
Metal Prototype Peter SL Chan (IC) (Mon May 03 1999 - 05:30:44 EEST)
RE: SLC File format (long) Susantha Subasinghe (Mon May 03 1999 - 06:37:08 EEST)
Re: Metal Prototype V. Pedron - MCP-Italia Srl (Mon May 03 1999 - 12:00:23 EEST)
state of art on reverse engineering Alain BERNARD (Mon May 03 1999 - 15:45:33 EEST)
RPML Elizabeth Nitz (Mon May 03 1999 - 16:39:34 EEST)
Re: state of art on reverse engineering Bert VandenBerg (Mon May 03 1999 - 16:46:15 EEST)
Photo of the RPML meeting at Chicago Conference 99 Rafael Santillan (Mon May 03 1999 - 18:02:43 EEST)
Re: Confused Foamcaster@aol.com (Mon May 03 1999 - 17:58:30 EEST)
AW: Metal Prototype Geiger, Martin (EP/QFM) (Mon May 03 1999 - 18:01:41 EEST)
Raindrop Geomagic Doug Greenwood (Mon May 03 1999 - 18:01:50 EEST)
Re: Metal Prototype Martin Koch (Mon May 03 1999 - 18:36:30 EEST)
Re: Metal Prototype Bill Loyd (Mon May 03 1999 - 17:30:43 EEST)
Re: SLC File format (long) Bill Loyd (Mon May 03 1999 - 17:29:41 EEST)
Test Castings Tom Richards (Mon May 03 1999 - 22:09:46 EEST)
CAD BENCHMARK Rafael Santillan (Mon May 03 1999 - 20:28:38 EEST)
Re: Valve Body Quotation Tom Richards (Mon May 03 1999 - 23:05:19 EEST)
Re: AW: Metal Prototype Tom Richards (Mon May 03 1999 - 23:30:51 EEST)
[Fwd: Re: Confused] michael rees (Tue May 04 1999 - 01:37:59 EEST)
Sand Casting via RP papers/bibliography. Stamatios Polydoras (Tue May 04 1999 - 14:36:38 EEST)
Used Actua Questions Brad Johnson (Tue May 04 1999 - 16:09:02 EEST)
Re: AW: Metal Prototype Tom Richards (Tue May 04 1999 - 19:02:13 EEST)
Looking for an AirBus contact Sachs (Tue May 04 1999 - 17:25:25 EEST)
Chicago photos missing Rafael Santillan (Tue May 04 1999 - 20:13:43 EEST)
How to learn Jon Cooper (Tue May 04 1999 - 19:46:57 EEST)
RE: How to learn KDenton@williams-int.com (Tue May 04 1999 - 20:18:22 EEST)
Business questions KDenton@williams-int.com (Tue May 04 1999 - 20:17:23 EEST)
Re: How to learn Jon Cooper (Tue May 04 1999 - 17:49:02 EEST)
Contact at Zeneca(UK) requested stephen.windsor@roverpte.demon.co.uk (Wed May 05 1999 - 10:16:08 EEST)
Need help with thin wall metal part Chad L Buchanan (Wed May 05 1999 - 18:42:27 EEST)
(no subject) Sherrick, George (Wed May 05 1999 - 19:06:34 EEST)
Re: Doug Mitchell (Wed May 05 1999 - 19:55:33 EEST)
Re: Doug Mitchell (Wed May 05 1999 - 20:17:54 EEST)
Re: IGES to STL translation Michael Tsenter (Wed May 05 1999 - 21:12:39 EEST)
CastformPS Vern Carter (Thu May 06 1999 - 00:02:09 EEST)
RE: [Fwd: Re: Confused] Brock Hinzmann (Thu May 06 1999 - 02:36:05 EEST)
RE: No shortage of Brains Brock Hinzmann (Thu May 06 1999 - 04:12:18 EEST)
'Help with dates of RPMI presentations' (fwd) Rapid Dude (Thu May 06 1999 - 07:43:53 EEST)
Re: STL from IDEAS Stamatios Polydoras (Thu May 06 1999 - 11:03:55 EEST)
Re: CastformPS tjgorn01 (Thu May 06 1999 - 16:49:57 EEST)
Re: CastformPS harvest@harvest-tech.com (Thu May 06 1999 - 17:02:10 EEST)
BURNOUT OF QUICKCAST PATTERNS Dauri Grellmann (Thu May 06 1999 - 17:18:10 EEST)
rapid tooling materials will pattison (Thu May 06 1999 - 18:14:43 EEST)
RE: state of art on reverse engineering razdan (Thu May 06 1999 - 18:16:37 EEST)
Database of RPML members Elaine Hunt (Thu May 06 1999 - 19:47:36 EEST)
.stl viewer Bradley VanDike (Thu May 06 1999 - 19:57:31 EEST)
.stl viewer Bradley VanDike (Thu May 06 1999 - 20:16:04 EEST)
RE: .stl viewer Bruce Okkema (Thu May 06 1999 - 21:05:50 EEST)
3d laser scanning service bureau? Bob Cheeseman (Thu May 06 1999 - 21:12:33 EEST)
FW: 3d laser scanning service bureau? Bob Cheeseman (Thu May 06 1999 - 21:43:45 EEST)
small formed copper contacts Impact - Doug Johnson (Thu May 06 1999 - 21:42:57 EEST)
Re: small formed copper contacts Britt Ferrill (Fri May 07 1999 - 02:41:55 EEST)
Re: .stl viewer Donghoon Lee (Fri May 07 1999 - 03:15:27 EEST)
RE: .stl viewer Mike Burton (Fri May 07 1999 - 03:50:41 EEST)
New Report Now Available Terry T. Wohlers (Fri May 07 1999 - 05:11:58 EEST)
Arctic Cat - anyone who has worked with them Mark Littlewood (Fri May 07 1999 - 16:03:13 EEST)
OT Friday Funnies... lblasch@opw-fc.com (Fri May 07 1999 - 08:41:52 EEST)
ultrasound and RP Elaine Hunt (Fri May 07 1999 - 17:07:17 EEST)
New Web site file names Marshall Burns (Fri May 07 1999 - 17:27:56 EEST)
Re: small formed copper contacts Tom Richards (Fri May 07 1999 - 20:32:15 EEST)
Fabricating Urethane Computer Mice ChathamRes@aol.com (Fri May 07 1999 - 17:35:49 EEST)
Re: AW: Metal Prototype Tom Richards (Fri May 07 1999 - 21:05:02 EEST)
RE: Arctic Cat - anyone who has worked with them Prof. P M Dickens (Fri May 07 1999 - 19:11:37 EEST)
Re: STL spec SCat3D@aol.com (Fri May 07 1999 - 19:33:14 EEST)
Re: ultrasound and RP Andy Christensen (Fri May 07 1999 - 21:20:09 EEST)
Honda Michael Maurice (Fri May 07 1999 - 20:50:31 EEST)
RE: Arctic Cat - anyone who has worked with them Michael Feygin (Fri May 07 1999 - 20:58:29 EEST)
Remote Monitoring 3-d technical services inc. (Fri May 07 1999 - 21:28:12 EEST)
Re: Honda David K. Leigh (Fri May 07 1999 - 21:59:36 EEST)
Re: Arctic Cat - anyone who has worked with them SIBCOINC@aol.com (Fri May 07 1999 - 23:04:59 EEST)
Re: STL spec Marshall Burns (Fri May 07 1999 - 23:35:05 EEST)
Honda Terry T. Wohlers (Sat May 08 1999 - 00:11:50 EEST)
xerox contact SIBCOINC@aol.com (Sat May 08 1999 - 00:31:21 EEST)
Re: [Fwd: Fabricating Urethane Computer Mice] Dreams to Reality Studios (Sat May 08 1999 - 02:58:15 EEST)
MSDS for X6111 Fauzi (Sat May 08 1999 - 04:08:55 EEST)
Re: xerox contact Douglas A. VanPutte (Sat May 08 1999 - 04:47:10 EEST)
re: Casting Christopher Charles Ainslev (Dr) (Sat May 08 1999 - 06:15:01 EEST)
RE: .stl viewer Gary Kalmanovich (Sat May 08 1999 - 18:04:54 EEST)
re: Casting Tom Richards (Sat May 08 1999 - 22:23:09 EEST)
Re: Casting Fusioneng@aol.com (Sat May 08 1999 - 20:16:58 EEST)
New computer design interfaces in-work? Monica & Glenn Whiteside (Sun May 09 1999 - 01:08:22 EEST)
RE: Translator software Monica & Glenn Whiteside (Sun May 09 1999 - 02:02:28 EEST)
RE: Space Puzzle Molding? Monica & Glenn Whiteside (Sun May 09 1999 - 02:17:56 EEST)
RE: New Report Now Available Monica & Glenn Whiteside (Sun May 09 1999 - 02:34:01 EEST)
Reverse engineering a valve body Glyn Churchman (Sun May 09 1999 - 22:57:47 EEST)
RE: Reverse engineering a valve body - CT and destructive solutions Brian Kissel (Mon May 10 1999 - 01:47:04 EEST)
Space Puzzle Molding Terry T. Wohlers (Mon May 10 1999 - 05:46:49 EEST)
Re: re: Casting Peter SL Chan (IC) (Mon May 10 1999 - 05:57:29 EEST)
1999 to be a good year for RP and related technologies! Monica & Glenn Whiteside (Mon May 10 1999 - 06:11:03 EEST)
re: Casting Christopher Charles Ainslev (Dr) (Mon May 10 1999 - 07:46:37 EEST)
Re: ultrasound and RP Robert Thompson (Mon May 10 1999 - 10:29:11 EEST)
High Tg resins from RPC Steinmann (Mon May 10 1999 - 17:03:57 EEST)
Re: Space Puzzle Molding Douglas A. VanPutte (Mon May 10 1999 - 17:25:53 EEST)
looking for an FDM quantum rp service bureau C. Kaan Senol (Mon May 10 1999 - 17:47:26 EEST)
RE: 1999 to be a good year for RP and related technologies! Caffrey, Tim (Mon May 10 1999 - 17:46:08 EEST)
Re: 1999 to be a good year for RP and related technologies! Steven (Mon May 10 1999 - 19:59:14 EEST)
RP Materials Charts Mark Henderson (Mon May 10 1999 - 20:00:02 EEST)
Terry's report Elaine Hunt (Mon May 10 1999 - 22:32:45 EEST)
Excellent Marketing Opportunity Leeann Starr Lane (Mon May 10 1999 - 23:05:49 EEST)
ATTN: Robert Thompson RE: ultrasound and RP Monica & Glenn Whiteside (Tue May 11 1999 - 03:16:39 EEST)
STL files of well Known Architecture Ross Nicholls (Tue May 11 1999 - 12:42:32 EEST)
Kirksite Supplier Tim Rhinehart (Tue May 11 1999 - 16:16:53 EEST)
Metal powder handling C. HAUSER (Tue May 11 1999 - 18:08:43 EEST)
Re: Metal powder handling Md Haider-E-Alahi (Wed May 12 1999 - 04:38:15 EEST)
RE:Mold Warranty Fauzi (Wed May 12 1999 - 06:59:00 EEST)
Photos from RP-ML meeting at Ennex.com Marshall Burns (Wed May 12 1999 - 14:12:07 EEST)
Thermoforming information wanted John Male (Wed May 12 1999 - 14:18:19 EEST)
APTEK UVIBOND and UVFILL materials KDenton@williams-int.com (Wed May 12 1999 - 15:30:13 EEST)
Re: Thermoforming information wanted Vern Carter (Wed May 12 1999 - 18:39:42 EEST)
Information needed about Ciba resins Steve Stewart (Wed May 12 1999 - 17:50:48 EEST)
Re: Photos from RP-ML meeting at Ennex.com Tom Richards (Wed May 12 1999 - 22:23:54 EEST)
Re: Thermoforming information wanted Michael Tsenter (Wed May 12 1999 - 19:23:29 EEST)
RE: Information needed about Ciba resins KDenton@williams-int.com (Wed May 12 1999 - 20:30:01 EEST)
High speed machining from STL's Brad Fox (Wed May 12 1999 - 22:55:44 EEST)
High speed machining from STL's Terry T. Wohlers (Thu May 13 1999 - 02:47:36 EEST)
Re: High speed machining from STL's Oneillcf@aol.com (Thu May 13 1999 - 05:37:10 EEST)
RE: High speed machining from STL's Giorgos Hatzilias (Thu May 13 1999 - 00:48:03 EEST)
RP Engineer - Position Geoff Wakeley (Thu May 13 1999 - 11:08:25 EEST)
sintered elastomer part needed Gruppo Promau - Area Marketing (Thu May 13 1999 - 13:54:59 EEST)
Urethane material similar to Dylark? Steve Hengsperger (Thu May 13 1999 - 14:01:59 EEST)
RE: High speed machining from STL's Ed Lambourne (Thu May 13 1999 - 14:37:48 EEST)
Bud Brown Douglas A. VanPutte (Thu May 13 1999 - 16:15:37 EEST)
Quick Turnaround R.I.M Bill Seil (Thu May 13 1999 - 16:46:20 EEST)
NASUG - Magics RP 5.0 Introduction Mark Bliek (Thu May 13 1999 - 17:33:36 EEST)
Re: Space Puzzle Molding PnRMolds@aol.com (Thu May 13 1999 - 19:08:24 EEST)
BrockWare kevan_jones@cemcom.com (Thu May 13 1999 - 19:19:36 EEST)
RPML profiles Elaine Hunt (Thu May 13 1999 - 21:54:50 EEST)
Nascar stl Lowicki, Brian R (Thu May 13 1999 - 23:45:06 EEST)
Re: Space Puzzle Molding Douglas A. VanPutte (Fri May 14 1999 - 00:29:43 EEST)
Mouse STL File rjensen@parker.com (Fri May 14 1999 - 00:53:42 EEST)
Re: RPML profiles Monica & Glenn Whiteside (Fri May 14 1999 - 06:06:58 EEST)
DeskProto Version 2.0, or Re: High speed machining from STL's Delft Spline Systems (Fri May 14 1999 - 11:17:48 EEST)
friday humor ( to improve intelligence) Elaine Hunt (Fri May 14 1999 - 15:24:55 EEST)
SL resin safety and other RPMI related files/docs Reggie Ponder (Fri May 14 1999 - 15:47:12 EEST)
Finishing of Duraform Parts Miller, Michael W (Fri May 14 1999 - 19:17:32 EEST)
Re: friday humor ( to improve intelligence) SCat3D@aol.com (Fri May 14 1999 - 20:06:17 EEST)
Gympsum material Brad Fox (Fri May 14 1999 - 20:38:10 EEST)
Re: Gympsum material Doug Mitchell (Fri May 14 1999 - 21:06:01 EEST)
Re: Gympsum material Paul Burr (Sat May 15 1999 - 03:53:04 EEST)
2D to 3D Christian LAVIGNE (Sat May 15 1999 - 04:54:42 EEST)
RE: 2D to 3D Giorgos Hatzilias (Sat May 15 1999 - 01:43:10 EEST)
Re: 2D to 3D Robert Jaquiss (Sat May 15 1999 - 08:09:58 EEST)
Re: 2D to 3D Paul Burr (Sat May 15 1999 - 16:17:51 EEST)
Re: 2D to 3D Greg Pettengill (Sat May 15 1999 - 16:40:33 EEST)
Re: Gympsum material Greg Pettengill (Sat May 15 1999 - 16:59:48 EEST)
2d to 3d greyscale conversion Paul Burr (Sat May 15 1999 - 16:54:17 EEST)
Re: 2D to 3D William D. Richards (Mon May 17 1999 - 01:26:58 EEST)
Re: rapid machining Gert Mensing (Mon May 17 1999 - 07:45:43 EEST)
RE: 2D to 3D Ed Lambourne (Mon May 17 1999 - 11:00:53 EEST)
Re: Gympsum material Doug Mitchell (Mon May 17 1999 - 14:10:26 EEST)
Re: RPML profiles Tom Richards (Mon May 17 1999 - 21:22:32 EEST)
Detailed Programme for European Conference IAN CAMPBELL (Mon May 17 1999 - 20:54:02 EEST)
Rapid Prototyping and Design Seminar Caroline Ray (Mon May 17 1999 - 22:10:09 EEST)
Re: Gympsum material Scott Nelson (Mon May 17 1999 - 22:21:58 EEST)
2D to 3D MR ALBIN A HASTBACKA (Mon May 17 1999 - 20:13:00 EEST)
How fine can you go? Glyn Churchman (Tue May 18 1999 - 01:31:08 EEST)
RP Technolgies Warren Prokopich (Tue May 18 1999 - 09:02:00 EEST)
Re: RP Technolgies C. Kaan Senol (Tue May 18 1999 - 10:57:37 EEST)
uRapid - in London (6/99) DanF@aol.com (Tue May 18 1999 - 11:26:22 EEST)
Trying to reach Will Pattison DanF@aol.com (Tue May 18 1999 - 11:40:12 EEST)
Re: RP Technolgies Marcus Joppe (Tue May 18 1999 - 13:35:18 EEST)
Re: How fine can you go? Franck Lacan (Tue May 18 1999 - 14:32:06 EEST)
RE: RP Technolgies Kenney, Tom (Tue May 18 1999 - 11:17:00 EEST)
uRapid - in London (6/99) Terry T. Wohlers (Tue May 18 1999 - 16:37:39 EEST)
RE: How fine can you go? Lightman, Allan J (Tue May 18 1999 - 16:53:36 EEST)
Re: RP Technolgies Victor C. Moreno (Tue May 18 1999 - 17:26:50 EEST)
Re: RP Technolgies Mr. Kyle Y. Root (Tue May 18 1999 - 18:39:37 EEST)
Re: How fine can you go? PROFORM AG (Tue May 18 1999 - 22:04:33 EEST)
interesting work Elaine Hunt (Tue May 18 1999 - 23:08:29 EEST)
RE: The More Perfect Mold Shop (article) will pattison (Tue May 18 1999 - 23:34:25 EEST)
RE: How fine can you go? Spielman, Roger L (Tue May 18 1999 - 23:54:43 EEST)
Re: interesting work EdGrenda@aol.com (Wed May 19 1999 - 00:25:31 EEST)
Re: RP Technolgies Marshall Burns (Wed May 19 1999 - 02:11:55 EEST)
Elastomer for buttons Ian Gibson (Wed May 19 1999 - 03:43:09 EEST)
RE: Off-topic, Mid-week Funnies SiderWhite (Wed May 19 1999 - 06:48:28 EEST)
Re: Elastomer for buttons DanF@aol.com (Wed May 19 1999 - 10:08:55 EEST)
mico rp Chris Sutcliffe (Wed May 19 1999 - 11:04:24 EEST)
Re: Elastomer for buttons Nick Osborn (Wed May 19 1999 - 11:27:10 EEST)
Re: Elastomer for buttons Tom Richards (Wed May 19 1999 - 19:44:36 EEST)
RE: micro rp Bauer Juergen (Wed May 19 1999 - 17:41:42 EEST)
High Speed Milling from STL-files j.Gunnink@ind.tno.nl (Wed May 19 1999 - 17:57:52 EEST)
Re: micro rp Steven (Wed May 19 1999 - 18:25:47 EEST)
Sales positions (NY, TX, CA, WA) Kevin Hawes (Wed May 19 1999 - 19:08:08 EEST)
Re: How fine can you go? Lee Eisinger (Wed May 19 1999 - 20:45:24 EEST)
RE: micro rp Tom Richards (Thu May 20 1999 - 00:20:37 EEST)
RE: Off-topic, more mid-week funnies to get us to Friday! SiderWhite (Thu May 20 1999 - 03:17:33 EEST)
RP Architecture Franna Gillespie (Thu May 20 1999 - 07:43:00 EEST)
Re: RP Architecture Michael Rees (Thu May 20 1999 - 19:30:27 EEST)
Re: RP Architecture cwho (Thu May 20 1999 - 20:52:34 EEST)
RE: RP Architecture Anshuman Razdan (Thu May 20 1999 - 21:11:06 EEST)
Re: RP Architecture B. J. Arnold-Feret (Thu May 20 1999 - 22:53:13 EEST)
Technical Magazines Rapid Dude (Fri May 21 1999 - 07:24:54 EEST)
Information is wanted V.Vestala (Fri May 21 1999 - 10:39:16 EEST)
iges translator C. Kaan Senol (Fri May 21 1999 - 11:21:23 EEST)
FEA RP output Andrzejewski, Jan (Fri May 21 1999 - 12:18:57 EEST)
Information is wanted V.Vestala (Fri May 21 1999 - 13:34:37 EEST)
Information is wanted Vilho Vestala (Fri May 21 1999 - 16:43:11 EEST)
Re: Technical Magazines Dan R. (Fri May 21 1999 - 16:03:13 EEST)
Rapid Tool Question Kevin Liles (Fri May 21 1999 - 17:25:42 EEST)
Re: Rapid Tool Question Nick Osborn (Fri May 21 1999 - 20:00:09 EEST)
Re: Rapid Tool Question Fusioneng@aol.com (Fri May 21 1999 - 21:36:36 EEST)
Re: Rapid Tool Question Wolfram Old�rp (Fri May 21 1999 - 21:23:05 EEST)
Re: Rapid Tool Question Cary Rosenberg (Sat May 22 1999 - 00:55:52 EEST)
Re: micro rp microtec (Sat May 22 1999 - 21:15:43 EEST)
Quick Cast Jordan Joseph W DLPC (Sun May 23 1999 - 02:59:25 EEST)
Re: iges translator SiderWhite (Sun May 23 1999 - 20:47:43 EEST)
RE: Quick Cast DANIEL CHARLES DAVIS (Mon May 24 1999 - 03:33:48 EEST)
Executive Newsletter dross@yahoo.com (Mon May 24 1999 - 01:52:26 EEST)
Newsletter for Executives dpross@yahoo.com (Mon May 24 1999 - 00:30:50 EEST)
data comparison Jae-Gu KIM (Mon May 24 1999 - 12:58:38 EEST)
RE: Quick Cast trevor.howarth@roverpte.demon.co.uk (Mon May 24 1999 - 11:24:28 EEST)
RE: Quick Cast Markus Hitter (Mon May 24 1999 - 14:20:06 EEST)
UK only (Re: Technical Magazines) Andrzejewski, Jan (Mon May 24 1999 - 16:50:57 EEST)
RE: Quick Cast Miller, Michael W (Mon May 24 1999 - 16:58:51 EEST)
3DSNASUG 2000 Deak, Steve (Mon May 24 1999 - 17:27:24 EEST)
RE: Rapid Tool Question Jim Williams (Mon May 24 1999 - 17:37:16 EEST)
Europe's New RPM Centre now open! ~ David J. Hood ~ (Mon May 24 1999 - 19:40:52 EEST)
Re: Europe's New RPM Centre now open! RP Solutions (Mon May 24 1999 - 21:02:07 EEST)
Looking for someone Beth P Israelnaim (Mon May 24 1999 - 22:41:06 EEST)
New RP Method Jeff Smith (Tue May 25 1999 - 00:17:38 EEST)
Re: STL files of well Known Architecture aaroflex (Tue May 25 1999 - 02:30:50 EEST)
Re: New RP Method Todd Kohne (Tue May 25 1999 - 04:14:08 EEST)
Somos 8100 DANIEL CHARLES DAVIS (Tue May 25 1999 - 05:43:56 EEST)
Brochure request deep@altavista.net (Mon May 24 1999 - 21:54:50 EEST)
Re: New RP Method Marshall Burns (Tue May 25 1999 - 12:06:17 EEST)
New RP Method Archie Swanner (Tue May 25 1999 - 16:14:37 EEST)
RE: Europe's New RPM Centre now open! Prof. P M Dickens (Tue May 25 1999 - 16:26:23 EEST)
High Temp Urethanes and Rotomolding bvanhiel@nordson.com (Tue May 25 1999 - 17:05:09 EEST)
RE: Somos 8100 Miller, Michael W (Tue May 25 1999 - 18:03:37 EEST)
RE: New RP Method Lightman, Allan J (Tue May 25 1999 - 18:36:39 EEST)
half vat SIBCOINC@aol.com (Tue May 25 1999 - 18:56:11 EEST)
RP Positions Available - UK based. Allan E W Rennie (Tue May 25 1999 - 20:18:52 EEST)
Re: Somos 8100 RPML (Tue May 25 1999 - 23:37:38 EEST)
Different CAD/CAM packages for RP Michael Dougherty (Wed May 26 1999 - 00:13:27 EEST)
Building a model Boyd, Elizabeth (Wed May 26 1999 - 01:53:33 EEST)
RE: Europe's New RPM Centre now open! JOHN WRIGHT (Mon Oct 26 1998 - 10:49:29 EET)
RE: Europe's New RPM Centre now open! Bauer Juergen (Wed May 26 1999 - 15:34:36 EEST)
Re: High Temp Urethanes and Rotomolding Glyn Churchman (Wed May 26 1999 - 01:01:59 EEST)
About WKI (Werner Kleitner Industries, U.S.A.) Serveis Tecnol�gics (Wed May 26 1999 - 16:59:36 EEST)
Re: Europe's New RPM Centre now open! Matt Murphy (Wed May 26 1999 - 17:30:58 EEST)
Job posting..and help Dawn Davis (Wed May 26 1999 - 18:56:19 EEST)
Re: Europe's New RPM Centre now open! Tom Richards (Wed May 26 1999 - 23:08:01 EEST)
Need help Jeff (Wed May 26 1999 - 20:48:53 EEST)
Need Help Jeff (Wed May 26 1999 - 21:38:17 EEST)
RPM and RPM! ~ David J. Hood ~ (Wed May 26 1999 - 22:29:14 EEST)
RP&M: Universities or service bureaus Elaine Hunt (Wed May 26 1999 - 22:30:06 EEST)
Reverse Engineering Mailing List Anshuman Razdan (Thu May 27 1999 - 07:29:05 EEST)
Three-dimensional image capture... Allan E W Rennie (Thu May 27 1999 - 13:22:22 EEST)
visit to portugal MC Moolman (Thu May 27 1999 - 11:43:33 EEST)
RE: Reverse Engineering Mailing List KDenton@williams-int.com (Thu May 27 1999 - 15:16:43 EEST)
RP Salaries ( RP list's living document) Elaine Hunt (Thu May 27 1999 - 15:41:44 EEST)
RE: Reverse Engineering Mailing List Rafael Santillan (Thu May 27 1999 - 18:10:19 EEST)
Re: Reverse Engineering Mailing List Doug Greenwood (Thu May 27 1999 - 18:43:57 EEST)
Looking for information on sheet metal prototyping Laura Casey (Thu May 27 1999 - 23:10:41 EEST)
RPM Centre as Trade Name !! Rafael Santillan (Fri May 28 1999 - 01:28:06 EEST)
rapid tooling for big parts Serveis Tecnol�gics (Fri May 28 1999 - 09:30:28 EEST)
RE: Looking for information on sheet metal prototyping Bauer Juergen (Fri May 28 1999 - 11:05:56 EEST)
rapid tooling for big parts Serveis Tecnol�gics (Fri May 28 1999 - 11:26:05 EEST)
About WKI (Werner Kleitner Industries, U.S.A.) Serveis Tecnol�gics (Fri May 28 1999 - 11:25:50 EEST)
JOKE warning...... Elaine Hunt (Fri May 28 1999 - 14:57:26 EEST)
Re: rapid tooling for big parts Lee Eisinger (Fri May 28 1999 - 17:16:11 EEST)
Fwd: Re: rapid tooling for big parts Serveis Tecnol�gics (Fri May 28 1999 - 17:45:27 EEST)
Dawn White Prof. P. M. Dickens (Fri May 28 1999 - 17:40:21 EEST)
Looking for Steve Deak jesalhus1@mmm.com (Fri May 28 1999 - 17:50:35 EEST)
2 thou layer thickness William LeBlanc (Fri May 28 1999 - 18:08:19 EEST)
new approach to composite materials Elaine Hunt (Fri May 28 1999 - 18:15:03 EEST)
Reverse Engineering Mailing List Anshuman Razdan (Fri May 28 1999 - 19:19:28 EEST)
Re: new approach to composite materials EdGrenda@aol.com (Fri May 28 1999 - 20:26:06 EEST)
Re: new approach to composite materials Tobias Wasser (Fri May 28 1999 - 21:31:37 EEST)
Re: Reverse Engineering Mailing List Siemer, Michael (Fri May 28 1999 - 21:34:22 EEST)
Re: new approach to composite materials Marshall Burns (Fri May 28 1999 - 21:53:20 EEST)
RE: Reverse Engineering Mailing List KDenton@williams-int.com (Fri May 28 1999 - 22:07:22 EEST)
RE: new approach to composite materials Bauer Juergen (Fri May 28 1999 - 22:29:37 EEST)
(no subject) Trevor James (Fri May 28 1999 - 22:28:27 EEST)
RE: new approach to composite materials Bauer Juergen (Fri May 28 1999 - 22:40:10 EEST)
APMM 1999 Conference RW Coleman (Fri May 28 1999 - 23:22:32 EEST)
Surface Development software JOHN WRIGHT (Fri May 28 1999 - 23:29:33 EEST)
Re[2]: new approach to composite materials lblasch@opw-fc.com (Fri May 28 1999 - 17:41:52 EEST)
Re: Reverse Engineering Mailing List Alain BERNARD (Sat May 29 1999 - 09:48:25 EEST)
Video clips of RP and RT needed Rafael Santillan (Sun May 30 1999 - 01:48:45 EEST)
strange phenomen Steven Oorts (Mon May 31 1999 - 13:29:06 EEST)
Re: new approach to composite materials Nick Osborn (Tue Jun 01 1999 - 18:20:26 EEST)
RE: strange phenomen Miller, Michael W (Tue Jun 01 1999 - 20:33:50 EEST)
CAD ENGINEER Bobby Bishop (Tue Jun 01 1999 - 21:28:56 EEST)
polane paint will pattison (Wed Jun 02 1999 - 00:33:30 EEST)
Information needed Re: IGES Paul Lasman (Wed Jun 02 1999 - 01:21:48 EEST)
subsribe Amba Datt Bhatt (Wed Jun 02 1999 - 15:43:49 EEST)
Pictures from 3DNASUG Beth P Israelnaim (Wed Jun 02 1999 - 16:10:42 EEST)
Looking for an expert Meghan Wolf (Wed Jun 02 1999 - 17:34:17 EEST)
Announce: SolidView special offers end June 30, 1999. Tom Vorgitch (Wed Jun 02 1999 - 19:58:09 EEST)
QuickCast Pattern Leak Testing Methods Kreitz, David (Wed Jun 02 1999 - 22:35:35 EEST)
Re: Announce: SolidView special offers end June 30, 1999. John Walmsley (Wed Jun 02 1999 - 22:24:03 EEST)
High Dielectric strength materials Impact - Doug Johnson (Wed Jun 02 1999 - 23:17:38 EEST)
RE: QuickCast Pattern Leak Testing Methods KDenton@williams-int.com (Wed Jun 02 1999 - 23:29:58 EEST)
RE: Off-topic, Back-to-work humor... SiderWhite (Thu Jun 03 1999 - 04:56:16 EEST)
RE: Off-topic, Redneck Jedi... SiderWhite (Thu Jun 03 1999 - 04:59:57 EEST)
Smile... SiderWhite (Thu Jun 03 1999 - 05:02:35 EEST)
suggestive RM development Nkin@aol.com (Thu Jun 03 1999 - 15:36:39 EEST)
nasug scrapbook Elaine Hunt (Thu Jun 03 1999 - 15:57:27 EEST)
Suggestions needed M.C. MOOLMAN (Thu Jun 03 1999 - 16:15:17 EEST)
Re: Investment Casting Tom Richards (Sat Jun 03 2000 - 21:57:07 EEST)
Re: High Dielectric strength materials Olinda Rush (Thu Jun 03 1999 - 21:00:33 EEST)
Re: Suggestions needed PnRMolds@aol.com (Thu Jun 03 1999 - 23:26:19 EEST)
sand casting Bob Powell (Thu Jun 03 1999 - 23:34:10 EEST)
Re: Suggestions needed Nick Osborn (Fri Jun 04 1999 - 10:35:46 EEST)
Dielectric Strength Information Nigel Coe (Fri Jun 04 1999 - 11:07:41 EEST)
Announce: RPA/SME RPM99 and PMMA/SME Award Recipient Linda Johnson (Fri Jun 04 1999 - 15:21:26 EEST)
end-life criterion for SL inserts Ricardo B. Gomide (Fri Jun 04 1999 - 15:49:45 EEST)
CAD work stations Steven Pollack (Fri Jun 04 1999 - 16:12:44 EEST)
end-life criterion for SL inserts Ricardo B. Gomide (Fri Jun 04 1999 - 16:41:01 EEST)
Kirtksite Serveis Tecnol�gics (Fri Jun 04 1999 - 16:40:04 EEST)
RE: Investment Casting Tom Richards (Sun Jun 04 2000 - 19:56:38 EEST)
Re: CAD work stations Paul J. Burr (Fri Jun 04 1999 - 18:15:20 EEST)
RE: end-life criterion for SL inserts Prof. P. M. Dickens (Fri Jun 04 1999 - 18:15:05 EEST)
RE: Kirtksite will pattison (Fri Jun 04 1999 - 18:23:10 EEST)
Re: CAD work stations bvanhiel@nordson.com (Fri Jun 04 1999 - 18:39:20 EEST)
Re: CAD work stations kevan_jones@cemcom.com (Fri Jun 04 1999 - 19:28:47 EEST)
CASE SWANK, WILLIAM E. (Fri Jun 04 1999 - 21:01:11 EEST)
Re: Kirtksite Drew Brown (Fri Jun 04 1999 - 20:15:45 EEST)
Re: CAD work stations kevan_jones@cemcom.com (Fri Jun 04 1999 - 21:14:36 EEST)
end-life criterion for SL inserts - Humorous response Joe Allison (Fri Jun 04 1999 - 21:10:31 EEST)
Re: end-life criterion for SL inserts - Humorous response Tom Richards (Sat Jun 05 1999 - 00:39:33 EEST)
Sales Position Rapid Prototyping/Tooling Software Mark Bliek (Fri Jun 04 1999 - 22:02:58 EEST)
Re: end-life criterion for SL inserts - Humorous response Sales@MLF (Fri Jun 04 1999 - 22:22:45 EEST)
RE: CAD work stations Luper, Harold (Fri Jun 04 1999 - 22:53:00 EEST)
Re: CAD work stations ATiburon@aol.com (Sat Jun 05 1999 - 03:31:53 EEST)
RE: suggestive RM development SiderWhite (Sat Jun 05 1999 - 20:09:59 EEST)
Intrernational conference in Japan m-imamura@sinto.co.jp (Sun Jun 06 1999 - 01:06:20 EEST)
RE: suggestive RM development Anshuman Razdan (Sun Jun 06 1999 - 03:04:57 EEST)
wanted to know some file transfer problem Girish (APDAP) (Mon Jun 07 1999 - 23:13:37 EEST)
regarding constant pressure foam molding Girish (APDAP) (Mon Jun 07 1999 - 23:06:40 EEST)
About Kirksite Serveis Tecnol�gics (Mon Jun 07 1999 - 13:10:40 EEST)
RE: wanted to know some file transfer problem Giorgos Hatzilias (Mon Jun 07 1999 - 15:20:37 EEST)
Press Release Michael Vincek (Mon Jun 07 1999 - 23:10:06 EEST)
Magnesium RP parts Eric Weinberg (Tue Jun 08 1999 - 16:03:46 EEST)
5510 resin Jordan Joseph W DLPC (Tue Jun 08 1999 - 19:00:51 EEST)
laser scanners Chris Sutcliffe (Tue Jun 08 1999 - 19:14:23 EEST)
SL5410 without zephir. Yannick seeleuthner (Tue Jun 08 1999 - 19:11:11 EEST)
RE: laser scanners Brian Kissel (Tue Jun 08 1999 - 21:21:25 EEST)
urethanes for investment casting Glyn Churchman (Tue Jun 08 1999 - 21:14:15 EEST)
Re: 5510 resin ATiburon@aol.com (Wed Jun 09 1999 - 02:30:43 EEST)
RE: Pager DANIEL CHARLES DAVIS (Wed Jun 09 1999 - 04:51:26 EEST)
Is there any books or material related to Scanning Path Planning? ��ȭ (Wed Jun 09 1999 - 05:53:27 EEST)
Re: Is there any books or material related to Scanning Path Planning? Alain BERNARD (Wed Jun 09 1999 - 12:51:21 EEST)
The Reverse Engineering Market Place Chris Lawrie (Wed Jun 09 1999 - 14:34:11 EEST)
How good is Imageware Surfacer Ellis Mackay (Wed Jun 09 1999 - 14:43:21 EEST)
something to think about...non RP Elaine Hunt (Wed Jun 09 1999 - 15:55:27 EEST)
used equipment Elaine Hunt (Wed Jun 09 1999 - 16:45:16 EEST)
RE: How good is Imageware Surfacer John Plagakis (Wed Jun 09 1999 - 17:26:16 EEST)
RE: How good is Imageware Surfacer John Plagakis (Wed Jun 09 1999 - 19:10:36 EEST)
QuickCast vs solid Steve Patton (Wed Jun 09 1999 - 19:35:19 EEST)
RE: How good is Imageware Surfacer Spielman, Roger L (Wed Jun 09 1999 - 20:12:56 EEST)
Re: 5510 resin James P. Harrison (Wed Jun 09 1999 - 15:36:22 EEST)
Re: Pager James P. Harrison (Wed Jun 09 1999 - 15:45:17 EEST)
Pre-Friday Humor BUDELSKY@aol.com (Wed Jun 09 1999 - 21:26:59 EEST)
RE: How good is Imageware Surfacer Bauer Juergen (Wed Jun 09 1999 - 22:32:41 EEST)
Call for Speakers - SME Injection Molding Programs Cindy Simon (Wed Jun 09 1999 - 22:43:05 EEST)
Re: Pre-Friday Humor - add ons B. J. Arnold-Feret (Thu Jun 10 1999 - 00:12:54 EEST)
RE: How good is Imageware Surfacer Jim Williams (Thu Jun 10 1999 - 01:48:03 EEST)
RE: urethanes for investment casting Jim Williams (Thu Jun 10 1999 - 02:04:32 EEST)
RE: Pager DANIEL CHARLES DAVIS (Thu Jun 10 1999 - 05:47:03 EEST)
Internet conference gallery Ian Gibson (Thu Jun 10 1999 - 07:26:33 EEST)
Metal rp, succes stories needed... Henri Koukka (Thu Jun 10 1999 - 10:49:18 EEST)
enquiry Mary Crowther (Thu Jun 10 1999 - 13:28:32 EEST)
Color/Dyed SLA parts Luper, Harold (Thu Jun 10 1999 - 15:38:13 EEST)
RPD'ing thermoformed parts Pedro Garayo (Thu Jun 10 1999 - 16:41:30 EEST)
Re: Metal rp, succes stories needed... Tom Richards (Thu Jun 10 1999 - 20:54:08 EEST)
RE: Color/Dyed SLA parts Deak, Steve (Thu Jun 10 1999 - 17:41:44 EEST)
Press Release: SICAM Becomes First Service Bureau to Commercialize MCP Systems' VaCAT Rapid Tooling Olinda Rush (Thu Jun 10 1999 - 18:27:23 EEST)
re: QuickCast vs solid Andrzejewski, Jan (Thu Jun 10 1999 - 18:54:41 EEST)
RE: Metal rp, succes stories needed... Tom Richards (Fri Jun 11 1999 - 00:41:16 EEST)
Re: RPD'ing thermoformed parts Glyn Churchman (Thu Jun 10 1999 - 23:57:03 EEST)
Casting WAX in silicon moulds Rafael Santillan (Fri Jun 11 1999 - 01:04:23 EEST)
Re: Metal rp, success stories needed... Robert Welther (Fri Jun 11 1999 - 01:57:16 EEST)
Surfacer vs IcemSurf Ana Bataller (Fri Jun 11 1999 - 13:18:04 EEST)
Laser Pure Mark Horner (Fri Jun 11 1999 - 15:49:48 EEST)
Geometrical errors of SLS parts Seksak Asavavisithchai (Fri Jun 11 1999 - 16:58:40 EEST)
Re: Surfacer vs IcemSurf Brent Hickel (Fri Jun 11 1999 - 16:48:41 EEST)
Geometrical errors of SLS parts Seksak Asavavisithchai (Fri Jun 11 1999 - 17:25:57 EEST)
Re: Casting WAX in silicon moulds Bruce E. LeMaster (Fri Jun 11 1999 - 17:26:37 EEST)
Re: Casting WAX in silicon moulds Marshall Burns (Fri Jun 11 1999 - 17:39:15 EEST)
Re: Geometrical errors of SLS parts harvest@harvest-tech.com (Fri Jun 11 1999 - 19:10:05 EEST)
Re: Surfacer vs IcemSurf vs.... SCat3D@aol.com (Fri Jun 11 1999 - 19:55:06 EEST)
Re: casting wax Glyn Churchman (Fri Jun 11 1999 - 20:03:38 EEST)
Re: Surfacer vs IcemSurf Alain BERNARD (Fri Jun 11 1999 - 20:38:09 EEST)
RE: Off-topic, Friday Humor, Parlez vous? SiderWhite (Fri Jun 11 1999 - 20:29:53 EEST)
Re: casting wax Bruce E. LeMaster (Fri Jun 11 1999 - 21:25:09 EEST)
Re: casting wax Glyn Churchman (Fri Jun 11 1999 - 21:44:57 EEST)
Re: Casting WAX in silicon moulds Ross Gates (Fri Jun 11 1999 - 20:32:14 EEST)
Re: Casting WAX in silicon moulds Chuck Alexander (Fri Jun 11 1999 - 22:38:59 EEST)
Re: Press Release: SICAM Becomes First Service Bureau.... PnRMolds@aol.com (Fri Jun 11 1999 - 22:53:35 EEST)
RP Invite to APMM Membership & Event of The Century! Cyndi Hoffpauer (Fri Jun 11 1999 - 23:02:22 EEST)
Virus Alert, Detailed, Read it PnRMolds@aol.com (Fri Jun 11 1999 - 23:08:12 EEST)
friday afternoon rant (was RE: Press Release: SALES PITCH TO FOLLOW...) will pattison (Sat Jun 12 1999 - 00:20:26 EEST)
Re: Laser Pure Eric King (Sat Jun 12 1999 - 14:37:53 EEST)
Re: Surfacer vs IcemSurf vs.... Jason Dickman (Sun Jun 13 1999 - 22:24:48 EEST)
Re: Surfacer vs IcemSurf vs....what works best for you use IT!!! Innomation Systems & Technologies Pte. Ltd., (Mon Jun 14 1999 - 11:25:59 EEST)
Online Database Stefan Stegmaier (Mon Jun 14 1999 - 12:29:45 EEST)
Online Database Stephan Tielo (Mon Jun 14 1999 - 14:36:05 EEST)
Medical grade RP materials. Joseph P. Frantz (Mon Jun 14 1999 - 15:54:12 EEST)
Re: Surfacer vs IcemSurf vs.... Bert VandenBerg (Mon Jun 14 1999 - 21:46:39 EEST)
Apllo Beer and the 3DNASLUG KDenton@williams-int.com (Mon Jun 14 1999 - 22:53:02 EEST)
Seeking quote on simple experiment Marshall Burns (Tue Jun 15 1999 - 16:52:33 EEST)
2000 schedule of events Marina Shara (Tue Jun 15 1999 - 17:08:37 EEST)
ANNOUNCE: Free SolidView 3.3 Update Tom Vorgitch (Tue Jun 15 1999 - 17:32:00 EEST)
research assistance Kevin Creehan (Tue Jun 15 1999 - 18:24:13 EEST)
Stratysis FDM 2000 Tom Jaskolski (Tue Jun 15 1999 - 18:13:12 EEST)
clear sla Todd Reese (Tue Jun 15 1999 - 21:02:49 EEST)
RE: research assistance Prof. P. M. Dickens (Tue Jun 15 1999 - 18:56:49 EEST)
RE: Surfacer vs IcemSurf vs.... Anshuman Razdan (Tue Jun 15 1999 - 19:54:10 EEST)
Re: clear sla Bruce E. LeMaster (Tue Jun 15 1999 - 19:49:03 EEST)
Need a Job? Vern Carter (Tue Jun 15 1999 - 22:20:31 EEST)
Re: [Re: clear sla] Tr K (Wed Jun 16 1999 - 00:23:42 EEST)
FW: research assistance (Australian Biomodelling Project) Neuro Surgery (Wed Jun 16 1999 - 01:56:30 EEST)
Online Ordering Randy Rua (Wed Jun 16 1999 - 03:00:24 EEST)
what materials for RP? Christian LAVIGNE (Wed Jun 16 1999 - 06:25:36 EEST)
Pros/Cons of SL5510 vs. SL5195 resin SiderWhite (Wed Jun 16 1999 - 07:38:34 EEST)
New Plastics Programs Scheduled for 2000 Cindy Simon (Wed Jun 16 1999 - 15:17:21 EEST)
Thought this might.... Allan E W Rennie (Wed Jun 16 1999 - 15:33:22 EEST)
remove from list Mark Tauschek (Wed Jun 16 1999 - 10:08:41 EEST)
Thermojet 75 Scott Sutterer (Wed Jun 16 1999 - 16:41:14 EEST)
STL Files from a Stack of 2D Slice Files MR ALBIN A HASTBACKA (Wed Jun 16 1999 - 13:59:48 EEST)
Medical Model Maker MR ALBIN A HASTBACKA (Wed Jun 16 1999 - 14:23:01 EEST)
research assistance Kevin Creehan (Wed Jun 16 1999 - 17:27:07 EEST)
Other lists John Clauson (Wed Jun 16 1999 - 18:32:07 EEST)
Re: Pros/Cons of SL5510 vs. SL5195 resin Fusioneng@aol.com (Wed Jun 16 1999 - 17:29:36 EEST)
remove from list ASH78216@aol.com (Wed Jun 16 1999 - 18:23:04 EEST)
Re: Pros/Cons of SL5510 vs. SL5195 resin James P. Harrison (Wed Jun 16 1999 - 19:42:28 EEST)
Re: STL Files from a Stack of 2D Slice Files image3 (Wed Jun 16 1999 - 20:20:32 EEST)
Laminated Prototyping Bill Richards (Thu Jun 17 1999 - 01:00:24 EEST)
Re: Laminated Prototyping Nkin@aol.com (Thu Jun 17 1999 - 01:56:40 EEST)
Re: Laminated Prototyping SiderWhite (Thu Jun 17 1999 - 04:05:44 EEST)
Pros/Cons on working with SL5520 resin? SiderWhite (Thu Jun 17 1999 - 04:11:19 EEST)
Re: Laminated Prototyping Fusioneng@aol.com (Thu Jun 17 1999 - 04:03:10 EEST)
Re: Laminated Prototyping Alain BERNARD (Thu Jun 17 1999 - 08:44:39 EEST)
Wawefront .obj to .stl Ismo M�kel� (Thu Jun 17 1999 - 11:38:35 EEST)
RE: Laminated Prototyping w.Backers@ind.tno.nl (Thu Jun 17 1999 - 12:46:43 EEST)
Re: clear sla Mark Lee (Thu Jun 17 1999 - 14:00:40 EEST)
Looking for Eric Radstok Ian Gibson (Thu Jun 17 1999 - 16:01:44 EEST)
Re: Wawefront .obj to .stl Douglas Bucci (Thu Jun 17 1999 - 17:05:24 EEST)
Thanks for Wawefront .obj to .stl Ismo M�kel� (Thu Jun 17 1999 - 17:50:24 EEST)
Fw: SLA Adhesives Craig Armstrong (Thu Jun 17 1999 - 18:00:00 EEST)
Re: SLA Adhesives Gabe Clark (Thu Jun 17 1999 - 19:06:36 EEST)
Humidity study Alta Precision (Thu Jun 17 1999 - 19:07:24 EEST)
RE: Humidity study KDenton@williams-int.com (Thu Jun 17 1999 - 20:52:40 EEST)
Liquid Crystal Polymers (LCP's) MR ALBIN A HASTBACKA (Thu Jun 17 1999 - 22:24:03 EEST)
Teaching material on Vacuum Casting Rafael Santillan (Fri Jun 18 1999 - 02:40:00 EEST)
RE: STL Files from a Stack of 2D Slice Files kris (Fri Jun 18 1999 - 13:20:02 EEST)
RE: Liquid Crystal Polymers (LCP's) Deak, Steve (Fri Jun 18 1999 - 14:00:06 EEST)
RE: Humidity study - Reply Scott Ostrem (Fri Jun 18 1999 - 15:38:49 EEST)
Need a source Wayne L Foss (Fri Jun 18 1999 - 16:22:49 EEST)
Seeking Beta Testers for a new RP Machine Scott A Taper (Fri Jun 18 1999 - 21:31:01 EEST)
happy Father's day Elaine Hunt (Fri Jun 18 1999 - 20:25:17 EEST)
RE: rp-ml-digest V4 #338 John Thiell (Fri Jun 18 1999 - 17:20:47 EEST)
Re: Seeking Beta Testers for a new RP Machine Tom Richards (Fri Jun 18 1999 - 19:01:48 EEST)
RE: Off-topic, Friday Humor NxInxs (Sat Jun 19 1999 - 02:49:28 EEST)
reverse-engineering Holger Loeffler (Sat Jun 19 1999 - 21:31:21 EEST)
RE: reverse-engineering Anshuman Razdan (Sun Jun 20 1999 - 10:51:39 EEST)
Re: reverse-engineering Alain BERNARD (Sun Jun 20 1999 - 16:58:35 EEST)
Models of Great Architecture RCaverly@aol.com (Sun Jun 20 1999 - 19:04:46 EEST)
Re: Models of Great Architecture Marshall Burns (Sun Jun 20 1999 - 21:44:03 EEST)
Re: Models of Great Architecture Michael Rees (Mon Jun 21 1999 - 02:35:20 EEST)
Re: reverse-engineering Innomation Systems & Technologies Pte. Ltd., (Mon Jun 21 1999 - 10:27:08 EEST)
Re: Models of Great Architecture Marshall Burns (Mon Jun 21 1999 - 04:15:29 EEST)
[ANNOUNCE] Official release of RapidForm 1.4 - Total Solution for 3D Scanning Donghoon Lee (Mon Jun 21 1999 - 14:15:57 EEST)
RE: reverse-engineering Giorgos Hatzilias (Mon Jun 21 1999 - 16:59:24 EEST)
I need a power supply Impact - Doug Johnson (Mon Jun 21 1999 - 19:07:03 EEST)
RE: Surfacer vs IcemSurf vs.... Brian Kissel (Tue Jun 22 1999 - 06:49:44 EEST)
'Help..... european conferences' Rapid Dude (Tue Jun 22 1999 - 07:43:19 EEST)
3D Systems tas7@daimlerchrysler.com (Tue Jun 22 1999 - 16:18:49 EEST)
3D Systems tas7@daimlerchrysler.com (Tue Jun 22 1999 - 16:27:36 EEST)
3d news Elaine Hunt (Tue Jun 22 1999 - 17:08:11 EEST)
chuck's back Elaine Hunt (Tue Jun 22 1999 - 17:11:43 EEST)
Temperature limits for SL5170 Narva, Jeffrey (Tue Jun 22 1999 - 17:54:00 EEST)
Re: 3d news Dewittal@aol.com (Tue Jun 22 1999 - 18:13:59 EEST)
5520 users Todd Reese (Tue Jun 22 1999 - 20:32:05 EEST)
Re: 3d news Marshall Burns (Tue Jun 22 1999 - 19:53:50 EEST)
Thank You Impact - Doug Johnson (Tue Jun 22 1999 - 21:53:19 EEST)
Equipment Paradox NCP LEASING (Tue Jun 22 1999 - 22:52:16 EEST)
RE: Temperature limits for SL5170 Prof. P. M. Dickens (Tue Jun 22 1999 - 23:36:18 EEST)
RE: chuck's back NxInxs (Wed Jun 23 1999 - 05:13:27 EEST)
'Help is here...' (fwd) Rapid Dude (Wed Jun 23 1999 - 07:31:47 EEST)
Re: How good is Imageware Surfacer...Yes, it works....but look at the support issue. Innomation Systems & Technologies Pte. Ltd., (Wed Jun 23 1999 - 16:10:58 EEST)
Part for SLS Quote Craig Armstrong (Wed Jun 23 1999 - 17:27:33 EEST)
Geometrical errors of SLS parts Chuck Kirschman (Wed Jun 23 1999 - 17:51:55 EEST)
Re: Cast Tooling Tom Richards (Wed Jun 23 1999 - 15:00:07 EEST)
pediatric jawbone or skull CAD model Thomas G Loebig (Wed Jun 23 1999 - 19:59:14 EEST)
Re: pediatric jawbone or skull CAD model Rafael Santillan (Wed Jun 23 1999 - 22:41:13 EEST)
Fiberglass sources Wayne L Foss (Wed Jun 23 1999 - 21:52:04 EEST)
Inconel 625 casting Bill Bellows (Wed Jun 23 1999 - 22:43:21 EEST)
Re: Cast Tooling Prof. P. M. Dickens (Wed Jun 23 1999 - 23:49:45 EEST)
Unigraphics, Observations Michael Rees (Thu Jun 24 1999 - 00:18:52 EEST)
Re: Unigraphics, Observations Rafael Santillan (Thu Jun 24 1999 - 17:01:36 EEST)
European Conferences IAN CAMPBELL (Thu Jun 24 1999 - 17:00:26 EEST)
European Conferences IAN CAMPBELL (Thu Jun 24 1999 - 17:00:25 EEST)
Re: pediatric jawbone or skull CAD model Rudolf Schenker (Thu Jun 24 1999 - 09:57:52 EEST)
Re: Inconel 625 casting Christian_Nelson/DTM@dtm-corp.com (Thu Jun 24 1999 - 16:33:25 EEST)
New Video Card Steven Pollack (Thu Jun 24 1999 - 16:45:07 EEST)
Re: Unigraphics, Observations Victor C. Moreno (Thu Jun 24 1999 - 16:59:48 EEST)
Fwd: New Video Card Elaine Hunt (Thu Jun 24 1999 - 17:38:51 EEST)
Stats Elaine Hunt (Thu Jun 24 1999 - 18:13:19 EEST)
Re: Unigraphics, Observations Steve Farentinos (Thu Jun 24 1999 - 18:10:51 EEST)
Spatial Inc. and Applied Metrology Inc. Announce ACIS-enabled Inq uest Ophelia Livingstone (Thu Jun 24 1999 - 19:07:44 EEST)
Re: Fwd: New Video Card Jim Vander Linden (Thu Jun 24 1999 - 20:01:05 EEST)
Re: Unigraphics, Observations Paul Lasman (Thu Jun 24 1999 - 20:07:04 EEST)
Ceramics Michael Rees (Thu Jun 24 1999 - 21:16:22 EEST)
Fwd: Re: Fwd: New Video Card Elaine Hunt (Thu Jun 24 1999 - 20:14:54 EEST)
Size of Prototype Tooling Market Terry T. Wohlers (Thu Jun 24 1999 - 20:15:43 EEST)
RE: Fwd: New Video Card Sabino Mata (Thu Jun 24 1999 - 20:27:43 EEST)
Re: European Conferences Marshall Burns (Thu Jun 24 1999 - 20:32:41 EEST)
Re: Stats Marshall Burns (Thu Jun 24 1999 - 20:41:51 EEST)
RE: Ceramics Brent Stucker (Thu Jun 24 1999 - 21:15:12 EEST)
RE: Fwd: New Video Card Bauer Juergen (Thu Jun 24 1999 - 22:30:22 EEST)
Re: Size of Prototype Tooling Market pk053154@indy.net (Thu Jun 24 1999 - 23:07:38 EEST)
Re[2]: Unigraphics, Observations lblasch@opw-fc.com (Thu Jun 24 1999 - 16:57:03 EEST)
Re: New Video Card and Future Predictions lblasch@opw-fc.com (Thu Jun 24 1999 - 16:57:04 EEST)
CAD Steven (Fri Jun 25 1999 - 03:04:42 EEST)
Size of Prototype Tooling Market Terry T. Wohlers (Fri Jun 25 1999 - 05:04:39 EEST)
Re: CAD Paul Burr (Fri Jun 25 1999 - 05:09:48 EEST)
Re: New Video Card Justin Kidder (Fri Jun 25 1999 - 05:24:29 EEST)
Re: CAD William D. Richards (Fri Jun 25 1999 - 05:57:22 EEST)
Re: pediatric jawbone Robert Thompson (Fri Jun 25 1999 - 13:03:57 EEST)
Re: pediatric jawbone Robert Thompson (Fri Jun 25 1999 - 13:22:56 EEST)
Re: Ceramics IAN CAMPBELL (Fri Jun 25 1999 - 12:20:35 EEST)
Greg Dillard?? Ken Zukley (Fri Jun 25 1999 - 18:04:32 EEST)
New SLA Resins harvest@harvest-tech.com (Fri Jun 25 1999 - 13:25:23 EEST)
RPC resins James P. Harrison (Fri Jun 25 1999 - 19:50:29 EEST)
Management of Mail Matt Murphy (Fri Jun 25 1999 - 19:58:15 EEST)
Form Z Michael Rees (Fri Jun 25 1999 - 21:21:27 EEST)
RE: Management of Mail Geoff Smith-Moritz (Fri Jun 25 1999 - 20:24:17 EEST)
Z402 Post Process Benjamin Leon (Fri Jun 25 1999 - 20:33:25 EEST)
Re: Management of Mail Scott Sutterer (Fri Jun 25 1999 - 20:40:28 EEST)
Re: Ceramics Alain BERNARD (Fri Jun 25 1999 - 21:26:15 EEST)
FW: Ceramics RP Chartoff, Richard P (Fri Jun 25 1999 - 21:44:18 EEST)
Zyrkon Bill Richards (Fri Jun 25 1999 - 23:59:34 EEST)
Problems with 5210 resin Vadim Pikhovich (Fri Jun 25 1999 - 22:18:56 EEST)
Re: Ceramics Robert Welther (Fri Jun 25 1999 - 22:55:27 EEST)
RE: Zyrkon Brent Stucker (Fri Jun 25 1999 - 22:43:37 EEST)
SLA resin comparison Mark Wynn (Sat Jun 26 1999 - 00:18:08 EEST)
Re: Problems with 5210 resin SCat3D@aol.com (Sat Jun 26 1999 - 01:02:36 EEST)
Last Call for 3DNASUG jpegs Bruce Okkema (Sat Jun 26 1999 - 01:51:41 EEST)
Rhino News - June 1999 Bob McNeel (Wed Jun 23 1999 - 01:02:31 EEST)
Re: model maker Tom Richards (Sat Jun 26 1999 - 12:14:02 EEST)
Re: model maker Advantage Prototype systems (Sun Jun 27 1999 - 23:37:26 EEST)
Position Opening- Manager of Manufacturing Product Development-Boston Mass Timmorr507@aol.com (Mon Jun 28 1999 - 01:22:03 EEST)
Re: model maker Ian Gibson (Mon Jun 28 1999 - 03:55:45 EEST)
stl tolerences V Lotke (Mon Jun 28 1999 - 09:16:12 EEST)
Re: Size of Prototype Tooling Market / uRapid feedback Nick Osborn (Fri Jun 25 1999 - 15:11:59 EEST)
Re: Size of Prototype Tooling Market / uRapid feedback Nick Osborn (Mon Jun 28 1999 - 11:38:34 EEST)
Mail Management Matt Murphy (Mon Jun 28 1999 - 13:53:58 EEST)
RE: Z402 Post Process Jan.Hill@adidas.de (Mon Jun 28 1999 - 17:50:48 EEST)
Re: SLA resin comparison bolson@molex.com (Mon Jun 28 1999 - 19:19:54 EEST)
Humor - non RP Brandon Jacobsen (Mon Jun 28 1999 - 19:42:20 EEST)
re: Humor - non RP bvanhiel@nordson.com (Mon Jun 28 1999 - 21:20:00 EEST)
Helisys 2030H L.O.M. for sale Julie (Mon Jun 28 1999 - 21:33:38 EEST)
Dennis Fogal Where are you! KDenton@williams-int.com (Tue Jun 29 1999 - 16:37:45 EEST)
Re: Dennis Fogal Where are you! Sales@MLF (Tue Jun 29 1999 - 17:45:42 EEST)
Re: Dennis Fogal Where are you! Patrick Townsend (Tue Jun 29 1999 - 18:21:59 EEST)
Poisson's ratio rena_surana@cemcom.com (Tue Jun 29 1999 - 18:45:52 EEST)
overview on how to rapid prototype the old way ed (Tue Jun 29 1999 - 19:41:18 EEST)
[Fwd: overview on how to rapid prototype the old way] ed (Tue Jun 29 1999 - 19:51:54 EEST)
RE: Dennis Fogal Where are you! KDenton@williams-int.com (Tue Jun 29 1999 - 20:04:34 EEST)
RE: Elastomer for buttons Smith Derek-EDS014 (Tue Jun 29 1999 - 22:19:37 EEST)
RE: Off-topic, mid-week humor NxInxs (Wed Jun 30 1999 - 02:15:23 EEST)
Rapid injection moilding Damon Johnston (Tue Jun 29 1999 - 23:02:00 EEST)
Rapid tooling Damon Johnston (Tue Jun 29 1999 - 23:33:19 EEST)
model file transfers Phil Harnett (Wed Jun 30 1999 - 09:34:16 EEST)
Rapid Prototyping of Glass Products IAN CAMPBELL (Wed Jun 30 1999 - 13:19:39 EEST)
Re: Rapid Prototyping of Glass Products Mnr. D de Beer (Wed Jun 30 1999 - 13:10:05 EEST)
thanks and bye Ron.Jamieson@ncl.ac.uk (Wed Jun 30 1999 - 13:35:13 EEST)
RE: Rapid Prototyping of Glass Products Bauer Juergen (Wed Jun 30 1999 - 14:56:13 EEST)
Re: model file transfers RoyJRATC@aol.com (Wed Jun 30 1999 - 15:55:22 EEST)
Re: model file transfers Robert Welther (Wed Jun 30 1999 - 17:33:14 EEST)
Re: Rapid Prototyping of Glass Products Marshall Burns (Wed Jun 30 1999 - 17:20:07 EEST)
Re: RPC resins Turra Luca - coll. meca (Thu Jul 01 1999 - 02:23:09 EEST)
Automation of rp machine operation Oivind Brockmeier (Wed Jun 30 1999 - 18:29:47 EEST)
Re: Automation of rp machine operation Wolfram Old�rp (Wed Jun 30 1999 - 21:00:57 EEST)
Re: Rapid tooling Wolfram Old�rp (Wed Jun 30 1999 - 20:52:49 EEST)
Food Grade Urethanes Luke Allison (Wed Jun 30 1999 - 21:41:03 EEST)
Re: Rapid Prototyping of Glass Products Sales@MLF (Wed Jun 30 1999 - 15:40:46 EEST)
Re: Rapid Prototyping of Glass Products Rick Harrington (Wed Jun 30 1999 - 22:36:26 EEST)
Re: Rapid Prototyping of Glass Products Delft Spline Systems (Wed Jun 30 1999 - 21:47:33 EEST)
Re: Rapid tooling Delft Spline Systems (Wed Jun 30 1999 - 21:52:43 EEST)
Re: Food Grade Urethanes Charly Fruth (Wed Jun 30 1999 - 23:25:52 EEST)
RP MLAB.ENGG@LUCASTVS.sprintrpg.ems.vsnl.net.in (Wed Jun 30 1999 - 22:49:36 EEST)
need compression contact involved with online ordering Randy Rua (Thu Jul 01 1999 - 03:46:26 EEST)
RE: Design News - Engineering Plastics NxInxs (Thu Jul 01 1999 - 07:28:23 EEST)
Laser cores for sale Kevin Tice (Thu Jul 01 1999 - 07:49:14 EEST)
HeCd laser cores for sale Kevin Tice (Thu Jul 01 1999 - 08:31:05 EEST)
Re: Rapid Prototyping of Glass Products Marshall Burns (Thu Jul 01 1999 - 09:19:56 EEST)
VArchive - 3D compression Adi Brand (Thu Jul 01 1999 - 11:09:05 EEST)
SLA laser retubing Yiannis Kotselis (Thu Jul 01 1999 - 11:42:42 EEST)
VArchive 3D compression Adi Brand (Thu Jul 01 1999 - 14:55:22 EEST)
DTM Operateurs in France Herve de Baillenx (Thu Jul 01 1999 - 15:58:03 EEST)
attainable accuracies Stephan Tielo (Thu Jul 01 1999 - 15:58:06 EEST)
Re: Automation of rp machine operation ATiburon@aol.com (Thu Jul 01 1999 - 15:34:48 EEST)
News Release: Low-Cost Rapid Prototyping Patent Database Available EdGrenda@aol.com (Thu Jul 01 1999 - 17:38:00 EEST)
Coherent 328 laser head Stacie L. Van Dorin (Thu Jul 01 1999 - 19:16:40 EEST)
operators of DTM mahines for FRANCE Herve de Baillenx (Thu Jul 01 1999 - 19:30:26 EEST)
operators of DTM mahines in France Herve de Baillenx (Thu Jul 01 1999 - 19:52:34 EEST)
MODEL TRAIN STL FILE Yung Tran (Thu Jul 01 1999 - 19:54:29 EEST)
Materials for LM Amba Datt Bhatt (Thu Jul 01 1999 - 21:11:08 EEST)
Re: Rapid Prototyping of Glass Products Rick Harrington (Thu Jul 01 1999 - 22:04:12 EEST)
Re: Materials for LM Christian_Nelson/DTM@dtm-corp.com (Thu Jul 01 1999 - 22:14:17 EEST)
Summary of prototype tooling question Terry T. Wohlers (Fri Jul 02 1999 - 01:37:38 EEST)
RE: Rapid Prototyping of Glass Products DANIEL CHARLES DAVIS (Fri Jul 02 1999 - 06:33:55 EEST)
size of medical RP/RT Son S.Peter (Fri Jul 02 1999 - 11:10:26 EEST)
Advertising Halford, Ben (Fri Jul 02 1999 - 12:07:54 EEST)
building full scale car body ??? Rallystuff@aol.com (Fri Jul 02 1999 - 14:09:04 EEST)
Re: Advertising Sales@MLF (Fri Jul 02 1999 - 15:30:10 EEST)
Cell phone case file needed Trevor James (Fri Jul 02 1999 - 16:02:23 EEST)
Research in Rapid Manufacture H.Pancholi (Fri Jul 02 1999 - 17:46:35 EEST)
Re: Advertising Fusioneng@aol.com (Fri Jul 02 1999 - 18:05:18 EEST)
Re: building full scale car body ??? Fusioneng@aol.com (Fri Jul 02 1999 - 18:19:31 EEST)
Equipment Paradox Followup NCP LEASING (Fri Jul 02 1999 - 18:35:40 EEST)
Re: Advertising Dr. Matt Murphy (Fri Jul 02 1999 - 18:41:40 EEST)
RE: building full scale car body ??? Jeff McBride (Fri Jul 02 1999 - 18:52:21 EEST)
off-topic: Friday humor Kevin Fletcher (Fri Jul 02 1999 - 19:02:36 EEST)
off-topic: Friday humor Kevin Fletcher (Fri Jul 02 1999 - 19:19:38 EEST)
R/P in NYC area Paul Lasman (Fri Jul 02 1999 - 19:26:16 EEST)
Re: off-topic: Friday humor Marshall Burns (Fri Jul 02 1999 - 20:15:03 EEST)
Re: Automation of rp machine operation Marshall Burns (Fri Jul 02 1999 - 20:24:50 EEST)
Re: building full scale car body ??? cthomas@eng.utah.edu (Fri Jul 02 1999 - 21:42:47 EEST)
Employment Opportunity - Mold Designer kevan_jones@cemcom.com (Fri Jul 02 1999 - 21:20:34 EEST)
RE: Elastomer for buttons Smith Derek-EDS014 (Fri Jul 02 1999 - 20:45:26 EEST)
Siggraph Steven (Fri Jul 02 1999 - 22:50:31 EEST)
Sanders Design MR ALBIN A HASTBACKA (Fri Jul 02 1999 - 20:05:14 EEST)
Re: Siggraph Gill Barequet (Fri Jul 02 1999 - 23:05:54 EEST)
Re: Siggraph Irene Quinlan (Fri Jul 02 1999 - 23:13:47 EEST)
Fabber sci-fi Marshall Burns (Sat Jul 03 1999 - 00:46:28 EEST)
re: building full scale car body ??? William D. Richards (Sat Jul 03 1999 - 00:51:22 EEST)
RE: Siggraph Anshuman Razdan (Sat Jul 03 1999 - 01:13:09 EEST)
National Public Radio program related to materials and direct metal fabrication Ranji Vaidyanathan (Sat Jul 03 1999 - 01:45:25 EEST)
RE: Siggraph Andrew Hally (Sat Jul 03 1999 - 02:11:31 EEST)
Re: Research in Rapid Manufacture William D. Richards (Sat Jul 03 1999 - 03:10:38 EEST)
Re: Fabber sci-fi morris verlander (Sat Jul 03 1999 - 04:05:54 EEST)
Re: Siggraph Michael Rees (Sat Jul 03 1999 - 10:48:32 EEST)
Hello and Art and Rapid Prototyping Michael Rees (Sat Jul 03 1999 - 10:58:29 EEST)
Off topic but off interest Michael Rees (Sat Jul 03 1999 - 11:27:27 EEST)
Re: Fabber sci-fi Sanat Agrawal pg me (Sat Jul 03 1999 - 10:12:24 EEST)
Re: Off topic but off interest William D. Richards (Sat Jul 03 1999 - 15:03:45 EEST)
foam for building full scale car body Todd Schuett (Sat Jul 03 1999 - 16:13:12 EEST)
Re: Siggraph Marshall Burns (Sat Jul 03 1999 - 18:56:04 EEST)
Laarge Foam RP parts lonepeak (Sat Jul 03 1999 - 19:19:16 EEST)
Re: Off topic but off interest Michael Rees (Sat Jul 03 1999 - 23:28:05 EEST)
National Public Radio program related to materials and direct metal fabrication Terry T. Wohlers (Sat Jul 03 1999 - 23:08:07 EEST)
Tolerances & Accuracies on FDM Wax pradyumna rallapalli (Sun Jul 04 1999 - 15:40:26 EEST)
Re: building full scale car body ??? Fusioneng@aol.com (Sun Jul 04 1999 - 21:05:17 EEST)
RP in Canada Ray Trowsdale (Mon Jul 05 1999 - 00:02:31 EEST)
Re: Fabber sci-fi Nick Osborn (Mon Jul 05 1999 - 12:53:39 EEST)
Re: VArchive 3D compression Evegeny Kotsuba (Mon Jul 05 1999 - 17:46:21 EEST)
Now c-stearns.hhhs@usa.net (Mon Jul 05 1999 - 17:29:04 EEST)
RP MLAB.ENGG@LUCASTVS.sprintrpg.ems.vsnl.net.in (Tue Jul 06 1999 - 03:39:09 EEST)
Re: RP Fusioneng@aol.com (Tue Jul 06 1999 - 07:23:25 EEST)
Re: RP Marshall Burns (Tue Jul 06 1999 - 10:13:24 EEST)
Offended b.Kooijmans@gearbox.prc.tno.nl (Tue Jul 06 1999 - 10:36:56 EEST)
What happened to the PHAST process? Franck Lacan (Tue Jul 06 1999 - 12:19:11 EEST)
(no subject) Caroline Newsome (Tue Jul 06 1999 - 10:28:02 EEST)
building full scale car body ??? Philippe Lalande (Tue Jul 06 1999 - 15:51:59 EEST)
Re: Offended ????? Rafael Santillan (Tue Jul 06 1999 - 17:17:00 EEST)
re-Offended B. J. Arnold-Feret (Tue Jul 06 1999 - 17:30:23 EEST)
explanation offended b.Kooijmans@gearbox.prc.tno.nl (Tue Jul 06 1999 - 17:26:35 EEST)
Your Amazon.com Delivers subscription info@amazon.com (Tue Jul 06 1999 - 17:59:11 EEST)
spamming Elaine Hunt (Tue Jul 06 1999 - 18:09:46 EEST)
Re: re-Offended Paul Hettrick (Tue Jul 06 1999 - 18:18:02 EEST)
Re: explanation offended Pedro Garayo (Tue Jul 06 1999 - 18:28:59 EEST)
mailing lists Bradley VanDike (Tue Jul 06 1999 - 18:49:10 EEST)
The RP scene in Scandinavia Jacob Rybov (Tue Jul 06 1999 - 18:47:12 EEST)
Amazon.com Subscriptions Login info@amazon.com (Tue Jul 06 1999 - 18:54:03 EEST)
spamming Impact - Doug Johnson (Tue Jul 06 1999 - 19:37:44 EEST)
Amazon.com Subscriptions Login info@amazon.com (Tue Jul 06 1999 - 19:57:45 EEST)
Amazon.com Subscriptions Changes info@amazon.com (Tue Jul 06 1999 - 20:20:49 EEST)
Re: spamming kevan_jones@cemcom.com (Tue Jul 06 1999 - 20:27:06 EEST)
Re: spamming Sales & Quoting office (Tue Jul 06 1999 - 21:09:58 EEST)
Scanners Jim Burt (Wed Jul 07 1999 - 00:15:44 EEST)
Re: Scanners Marshall Burns (Wed Jul 07 1999 - 01:31:30 EEST)
Humorous sterolith note SCat3D@aol.com (Wed Jul 07 1999 - 01:36:24 EEST)
Re: building full scale car body ??? Brock Hinzmann (Wed Jul 07 1999 - 02:41:13 EEST)
Amazon.com Subscriptions Changes info@amazon.com (Wed Jul 07 1999 - 02:54:23 EEST)
Re: Amazon.com Subscriptions Changes dfboyer@ix.netcom.com (Wed Jul 07 1999 - 07:00:07 EEST)
Amazon.com Subscriptions Changes info@amazon.com (Wed Jul 07 1999 - 07:14:12 EEST)
Re: Scanners Innomation Systems & Technologies Pte. Ltd., (Wed Jul 07 1999 - 10:41:33 EEST)
IT sales effectiveness cole@nfmail.com (Wed Jul 07 1999 - 01:50:34 EEST)
Al mold needed DANIEL CHARLES DAVIS (Wed Jul 07 1999 - 08:31:24 EEST)
Re: Scanners Paul-Henri Tinguely (Wed Jul 07 1999 - 10:30:09 EEST)
ptm&w info Ken The Racer (Wed Jul 07 1999 - 11:18:27 EEST)
SV: The RP scene in Scandinavia Berndt Holmer (Wed Jul 07 1999 - 10:54:30 EEST)
RE: Scanners Timmel, Ingrid (Wed Jul 07 1999 - 15:24:45 EEST)
3d Lightyear? Scott Sutterer (Wed Jul 07 1999 - 15:37:56 EEST)
Re: Scanners tjgorn01 (Mon Jun 28 1999 - 15:46:21 EEST)
RE: 3d Lightyear? KDenton@williams-int.com (Wed Jul 07 1999 - 16:09:42 EEST)
Marqueting in RPL !!!!! Rafael Santillan (Wed Jul 07 1999 - 17:32:00 EEST)
Re: 3d Lightyear? Fusioneng@aol.com (Wed Jul 07 1999 - 17:03:05 EEST)
Re: Scanners Brent Hickel (Wed Jul 07 1999 - 17:30:03 EEST)
stl files needed Elaine Hunt (Thu Jul 08 1999 - 07:32:02 EEST)
[Fwd: Glossary of Terms] Barry Saffaie (Wed Jul 07 1999 - 18:45:08 EEST)
RE: Scanners Brian Kissel (Wed Jul 07 1999 - 18:58:02 EEST)
Re: 3d Lightyear? bolson@molex.com (Wed Jul 07 1999 - 18:18:41 EEST)
Re: Scanners Anshuman Razdan (Wed Jul 07 1999 - 19:16:05 EEST)
RE: stl files needed apminc@execpc.com (Wed Jul 07 1999 - 19:42:15 EEST)
SLS glass duraform problems Drew Brown (Wed Jul 07 1999 - 20:02:09 EEST)
Re: stl files needed Tom Richards (Wed Jul 07 1999 - 16:27:02 EEST)
RE: SLS glass duraform problems Miller, Michael W (Wed Jul 07 1999 - 20:45:32 EEST)
News Release - Metal Castings Michael Tsenter (Wed Jul 07 1999 - 20:46:36 EEST)
Re: stl files needed Jamie Ledin (Wed Jul 07 1999 - 21:22:16 EEST)
FW: SLS glass duraform problems TRAVIS BEHARA (Wed Jul 07 1999 - 22:53:12 EEST)
RE: SLS glass duraform problems TRAVIS BEHARA (Wed Jul 07 1999 - 22:56:20 EEST)
Re: stl files needed William D. Richards (Thu Jul 08 1999 - 00:38:36 EEST)
Uncle-on scanners Jim Burt (Thu Jul 08 1999 - 00:38:13 EEST)
Re: stl files needed William D. Richards (Thu Jul 08 1999 - 00:43:34 EEST)
Re: stl files needed Paul Burr (Thu Jul 08 1999 - 01:14:06 EEST)
Re: spamming William D. Richards (Thu Jul 08 1999 - 01:42:37 EEST)
RE: 3d Lightyear? TAN CHOR ANN, RP (Thu Jul 08 1999 - 03:48:16 EEST)
Re: SV: The RP scene in Scandinavia Fusioneng@aol.com (Wed Jul 07 1999 - 16:51:56 EEST)
SLA-5000 & DuPont Resins rena_surana@cemcom.com (Thu Jul 08 1999 - 17:07:51 EEST)
NEWS RELEASE Nick Osborn (Thu Jul 08 1999 - 19:48:38 EEST)
Cad Fix Scott Sutterer (Thu Jul 08 1999 - 20:56:37 EEST)
RE: 3d Lightyear? KDenton@williams-int.com (Thu Jul 08 1999 - 15:13:16 EEST)
RE: 3d Lightyear? Mr. Kyle Y. Root (Thu Jul 08 1999 - 21:28:13 EEST)
Re: 3d Lightyear? Scott Sutterer (Thu Jul 08 1999 - 21:54:52 EEST)
RE: SLS glass duraform problems Jim Williams (Fri Jul 09 1999 - 01:24:10 EEST)
Re: stl files needed cwho (Fri Jul 09 1999 - 02:09:55 EEST)
Re: 3d Lightyear? ATiburon@aol.com (Fri Jul 09 1999 - 04:02:22 EEST)
Re: stl files needed Steven Pollack (Fri Jul 09 1999 - 07:08:30 EEST)
Large Scale Reverse Engineering Question Matt Przybylski (Fri Jul 09 1999 - 09:15:55 EEST)
news release Andrzejewski, Jan (Fri Jul 09 1999 - 11:40:22 EEST)
RE: stl files needed Deak, Steve (Fri Jul 09 1999 - 14:23:33 EEST)
Re: stl files needed SWANK, WILLIAM E. (Fri Jul 09 1999 - 15:43:17 EEST)
RE: SLS glass duraform problems SWANK, WILLIAM E. (Fri Jul 09 1999 - 16:00:17 EEST)
Re: stl files needed by way of Elaine Hunt (Sat Jul 10 1999 - 04:06:23 EEST)
Re: news release Sales@MLF (Fri Jul 09 1999 - 15:38:20 EEST)
Software question Mark Wynn (Fri Jul 09 1999 - 16:01:41 EEST)
Re: stl files needed Irene Quinlan (Fri Jul 09 1999 - 16:08:20 EEST)
Call for Papers - Rapid Prototyping of Mechanisms and Robotics Systems Imme Ebert-Uphoff (Fri Jul 09 1999 - 16:49:34 EEST)
Computer Camera by way of Elaine Hunt (Sat Jul 10 1999 - 07:32:55 EEST)
RE: Friday Humor SiderWhite (Fri Jul 09 1999 - 23:35:43 EEST)
Re: stl files needed Brock Hinzmann (Fri Jul 09 1999 - 23:43:13 EEST)
RE: SLS glass duraform problems Jim Williams (Sat Jul 10 1999 - 00:38:21 EEST)
Re: NEWS RELEASE ATiburon@aol.com (Sat Jul 10 1999 - 05:23:39 EEST)
RE: Large Scale Reverse Engineering Question Anshuman Razdan (Sat Jul 10 1999 - 08:09:05 EEST)
Re: 3d Lightyear? TAN CHOR ANN, RP (Fri Jul 09 1999 - 10:29:22 EEST)
RE: Off-topic, Satruday Humor.... NxInxs (Sun Jul 11 1999 - 00:14:39 EEST)
Re: Software question NxInxs (Sun Jul 11 1999 - 01:42:24 EEST)
Only 14 Good reps needed! SuccessQuest (Sun Jul 11 1999 - 10:56:26 EEST)
Re: Software question Sales@MLF (Fri Jul 09 1999 - 18:47:13 EEST)
Used Stratasys 2000 System Rkp18@aol.com (Mon Jul 12 1999 - 07:30:28 EEST)
Only 14 Good reps needed! SWANK, WILLIAM E. (Mon Jul 12 1999 - 15:58:17 EEST)
dream stealing Elaine Hunt (Tue Jul 13 1999 - 04:05:12 EEST)
Sales Tips Newsletter prsales@sellingtip1999.click2site.com (Mon Jul 12 1999 - 04:47:39 EEST)
REMOVE SOLICITOR SWANK, WILLIAM E. (Mon Jul 12 1999 - 17:32:17 EEST)
Re: Sales Tips Newsletter kevan_jones@cemcom.com (Mon Jul 12 1999 - 16:41:36 EEST)
More EMAILS OF Marqueting Rafael Santillan (Mon Jul 12 1999 - 17:36:04 EEST)
Re: REMOVE SOLICITOR kevan_jones@cemcom.com (Mon Jul 12 1999 - 17:21:38 EEST)
Spam - A solution? Dr. Matt Murphy (Mon Jul 12 1999 - 17:52:16 EEST)
RIM Vendor lrwhitaker@mmm.com (Mon Jul 12 1999 - 17:42:44 EEST)
Re: Spam - A solution? kevan_jones@cemcom.com (Mon Jul 12 1999 - 18:28:44 EEST)
RE: stl files needed (Rings!) Smith Derek-EDS014 (Mon Jul 12 1999 - 18:49:42 EEST)
RE: stl files needed (Rings!) Tom Richards (Mon Jul 12 1999 - 15:39:22 EEST)
Re: Software question Jim Greene (Mon Jul 12 1999 - 19:36:43 EEST)
Re: Sales Tips Newsletter Mark Bannister (Mon Jul 12 1999 - 20:08:20 EEST)
Re: stl files needed Cherry M Ogata (Mon Jul 12 1999 - 21:22:53 EEST)
RE: Sales Tips Newsletter KDenton@williams-int.com (Mon Jul 12 1999 - 22:10:13 EEST)
RE: Sales Tips Newsletter kevan_jones@cemcom.com (Mon Jul 12 1999 - 23:54:43 EEST)
Another solution to Spam Rafael Santillan (Tue Jul 13 1999 - 01:12:43 EEST)
RE: Sales Tips Newsletter Cota, Vesna (Tue Jul 13 1999 - 00:37:59 EEST)
RE: Sales Tips Newsletter Spielman, Roger L (Tue Jul 13 1999 - 01:10:37 EEST)
RE: Sales Tips Newsletter Chuck Alexander (Tue Jul 13 1999 - 01:47:54 EEST)
Re: Sales Tips Newsletter Todd Kohne (Tue Jul 13 1999 - 02:34:10 EEST)
SLA-500 chiller Max Gerdts (Tue Jul 13 1999 - 03:28:36 EEST)
New rp-ml newsgroup, etc. DANIEL CHARLES DAVIS (Tue Jul 13 1999 - 03:50:29 EEST)
To set the record straight Halford, Ben (Tue Jul 13 1999 - 14:03:45 EEST)
did we ever find out who subscribed rp-ml to all the spam lists? B. J. Arnold-Feret (Tue Jul 13 1999 - 17:50:06 EEST)
You have been added to the SHOPPER-DISPATCH list L-Soft list server at CNET: THE COMPUTER NETWORK (1.8d) (Tue Jul 13 1999 - 18:13:52 EEST)
Apologies kevan_jones@cemcom.com (Tue Jul 13 1999 - 19:15:10 EEST)
FW: You have been added to the SHOPPER-DISPATCH list Hurley, Lynda J (Tue Jul 13 1999 - 19:24:14 EEST)
RE: did we ever find out who subscribed rp-ml to all the spam lis ts? Bauer Juergen (Tue Jul 13 1999 - 19:58:16 EEST)
Re: Sales Tips Newsletter Sales@MLF (Tue Jul 13 1999 - 16:00:35 EEST)
Fw: Virus Alert Sales@MLF (Tue Jul 13 1999 - 15:51:22 EEST)
titanium sintering Miller, Michael W (Tue Jul 13 1999 - 20:53:30 EEST)
Re: Wobbler virus... McGrath, Michael (Tue Jul 13 1999 - 23:20:32 EEST)
RE: MetricVision FM laser scanner SiderWhite (Wed Jul 14 1999 - 05:35:07 EEST)
Keltool alternatives? Darren Martin (Wed Jul 14 1999 - 06:41:54 EEST)
Re: titanium sintering Jean-Marc Bo�chat (Wed Jul 14 1999 - 07:26:06 EEST)
Launch of the Rapid Manufacturing Consortium Prof. P. M. Dickens (Wed Jul 14 1999 - 08:43:34 EEST)
Vacancy - Junior research Fellow Prof. P. M. Dickens (Wed Jul 14 1999 - 08:43:45 EEST)
1500 fdm X axis encoder Gordon Burnett (Wed Jul 14 1999 - 09:40:57 EEST)
macros for RP magics or SolidView Koharian Elen (Wed Jul 14 1999 - 16:19:41 EEST)
AutoCAD Koharian Elen (Wed Jul 14 1999 - 16:26:22 EEST)
Re: Keltool alternatives? Ross Gates (Wed Jul 14 1999 - 17:49:45 EEST)
RE: Keltool alternatives? Brent Stucker (Wed Jul 14 1999 - 18:10:32 EEST)
Re: NEWS RELEASE Nick Osborn (Wed Jul 14 1999 - 18:27:19 EEST)
REMOVE Walter Bornhorst (Wed Jul 14 1999 - 18:47:39 EEST)
FW: Not a Joke! Internet surcharges through ISP's Sales@MLF (Wed Jul 14 1999 - 18:44:28 EEST)
RE: Not a Joke! Internet surcharges through ISP's KDenton@williams-int.com (Wed Jul 14 1999 - 19:16:20 EEST)
Re: Not a Joke! Internet surcharges through ISP's Michael Dougherty (Wed Jul 14 1999 - 19:33:17 EEST)
RE: 1500 fdm X axis encoder Giorgos Hatzilias (Wed Jul 14 1999 - 21:21:56 EEST)
Bridge Works Defaults Scott Sutterer (Wed Jul 14 1999 - 21:29:15 EEST)
RE: 1500 fdm X axis encoder Giorgos Hatzilias (Wed Jul 14 1999 - 22:30:08 EEST)
Re: Bridge Works Defaults aaroflex (Thu Jul 15 1999 - 02:55:08 EEST)
RE: macros for RP magics or SolidView DANIEL CHARLES DAVIS (Thu Jul 15 1999 - 04:27:40 EEST)
Re: AutoCAD Christian LAVIGNE (Thu Jul 15 1999 - 05:52:03 EEST)
Preparing ARX for ACADR14 Saurabh Vishal (Thu Jul 15 1999 - 10:55:24 EEST)
Re: macros for RP magics or SolidView TAN CHOR ANN, RP (Thu Jul 15 1999 - 10:21:03 EEST)
Light Sculpting, Inc. Jan.Hill@adidas.de (Thu Jul 15 1999 - 13:39:58 EEST)
Re: Light Sculpting, Inc. Kai Uwe Koch (Thu Jul 15 1999 - 14:44:56 EEST)
new address will pattison (Thu Jul 15 1999 - 18:23:51 EEST)
RE: Light Sculpting, Inc. Giorgos Hatzilias (Thu Jul 15 1999 - 21:05:45 EEST)
Catia Impact - Doug Johnson (Thu Jul 15 1999 - 21:59:18 EEST)
3D digitizers Chan Lea (Thu Jul 15 1999 - 23:57:22 EEST)
Du Pont resin growing thicker aaroflex (Fri Jul 16 1999 - 04:51:17 EEST)
Re: FW: Not a Joke! Internet surcharges through ISP's ATiburon@aol.com (Fri Jul 16 1999 - 04:15:26 EEST)
Re: Bridge Works Defaults ATiburon@aol.com (Fri Jul 16 1999 - 04:26:04 EEST)
Re: NEWS RELEASE ATiburon@aol.com (Fri Jul 16 1999 - 04:38:46 EEST)
SLA500 query TAN CHOR ANN, RP (Fri Jul 16 1999 - 04:59:10 EEST)
High Precision SLA George Perkins (Fri Jul 16 1999 - 11:11:19 EEST)
Fw: High Precision SLA Chris Sutcliffe (Fri Jul 16 1999 - 12:27:24 EEST)
New Conference at EuroMold '99 Terry T. Wohlers (Fri Jul 16 1999 - 17:36:51 EEST)
IGES to STL files Valter E. Beal (Fri Jul 16 1999 - 18:12:44 EEST)
RE: New Conference at EuroMold '99 KDenton@williams-int.com (Fri Jul 16 1999 - 18:18:25 EEST)
Re: New Conference at EuroMold '99 Marshall Burns (Fri Jul 16 1999 - 18:23:28 EEST)
Re: NEWS RELEASE Nick Osborn (Fri Jul 16 1999 - 18:56:44 EEST)
Re: IGES to STL files Michael Tsenter (Fri Jul 16 1999 - 19:06:53 EEST)
Re: New Conference at EuroMold '99 Sales@MLF (Fri Jul 16 1999 - 19:10:14 EEST)
STL and IGES problems Andrzejewski, Jan (Fri Jul 16 1999 - 19:27:04 EEST)
Medical application of RP Bruno Le Razer (Fri Jul 16 1999 - 19:27:47 EEST)
Re: Medical application of RP Evegeny Kotsuba (Fri Jul 16 1999 - 20:56:20 EEST)
Please help Walter Bornhorst (Fri Jul 16 1999 - 20:24:18 EEST)
1999 SLS User's Group Annoucement Jim Williams (Fri Jul 16 1999 - 20:26:52 EEST)
Re: Medical application of RP Le Chi Hieu (Fri Jul 16 1999 - 20:58:29 EEST)
Opportunites to interact with and learn from leaders in the plastic industry Marina Shara (Fri Jul 16 1999 - 21:06:15 EEST)
Re: New Conference at EuroMold '99 Scott A Taper (Fri Jul 16 1999 - 22:18:56 EEST)
PICZA Terry T. Wohlers (Fri Jul 16 1999 - 21:25:55 EEST)
Re: macros for RP magics or SolidView Tom Vorgitch (Fri Jul 16 1999 - 21:48:28 EEST)
Re: Medical application of RP image3 (Fri Jul 16 1999 - 22:56:09 EEST)
Morgan-Press Pte7233@aol.com (Fri Jul 16 1999 - 23:01:47 EEST)
Re: Medical application of RP Alain BERNARD (Sat Jul 17 1999 - 11:23:00 EEST)
Information request Kevin Platt (Sat Jul 17 1999 - 13:26:42 EEST)
RE: Morgan-Press NxInxs (Sat Jul 17 1999 - 22:07:52 EEST)
Re: Morgan-Press Paul Finelt (Sun Jul 18 1999 - 21:44:58 EEST)
Minolta 3D camera ksraman@ead.cmmacs.ernet.in (Mon Jul 19 1999 - 16:57:47 EEST)
RE: Information request Bauer Juergen (Mon Jul 19 1999 - 10:38:19 EEST)
RE: Light Sculpting, Inc. Jan.Hill@adidas.de (Mon Jul 19 1999 - 16:22:37 EEST)
Direct Sintering of Metals and Site requirements. Leading Edge Marketing Services (Mon Jul 19 1999 - 17:13:01 EEST)
Seeking EDM and water-jet sources Marshall Burns (Mon Jul 19 1999 - 17:24:01 EEST)
information ETP rapid prototype (Mon Jul 19 1999 - 17:37:43 EEST)
Solid Free Form Conference KDenton@williams-int.com (Mon Jul 19 1999 - 18:33:20 EEST)
Re: Solid Free Form Conference Alain BERNARD (Mon Jul 19 1999 - 19:04:16 EEST)
CNET Shopper.com Dispatch CNET Shopper.com Dispatch (Mon Jul 19 1999 - 20:41:22 EEST)
Re: CNET Dispatch Unsubscribe L-Soft list server at CNET: THE COMPUTER NETWORK (1.8d) (Mon Jul 19 1999 - 21:38:09 EEST)
Re: Seeking EDM and water-jet sources Wolfram Old�rp (Mon Jul 19 1999 - 21:51:18 EEST)
Polypropylene Re: Materials for LM Brock Hinzmann (Tue Jul 20 1999 - 00:16:13 EEST)
Looking for EPSA in Spain IJ George (Tue Jul 20 1999 - 00:17:06 EEST)
Re: CNET Dispatch Unsubscribe L-Soft list server at CNET: THE COMPUTER NETWORK (1.8d) (Tue Jul 20 1999 - 01:49:02 EEST)
Re: Looking for EPSA in Spain Pedro Garayo (Tue Jul 20 1999 - 10:53:18 EEST)
0.025 SLA350 layer build Andrzejewski, Jan (Tue Jul 20 1999 - 13:07:44 EEST)
RE: Direct Sintering of Metals and Site requirements. Jim Williams (Tue Jul 20 1999 - 20:11:10 EEST)
Fw: Actify releases 3D View 3.5. View Solid Edge, IGES 2D/3D, Catia, DWG/DXF Parasolid, VRML, STL, Solid Work Vern Carter (Wed Jul 21 1999 - 00:13:17 EEST)
RPMI Symposium 2000 Reggie Ponder (Tue Jul 20 1999 - 23:55:32 EEST)
image format of MIMICS #MA DI# (Wed Jul 21 1999 - 12:06:59 EEST)
[Help] Information about RP machines manufacturers ! Le Chi Hieu (Wed Jul 21 1999 - 12:59:21 EEST)
Reminder - Vacancy - Junior research Fellow Prof. P. M. Dickens (Wed Jul 21 1999 - 16:44:44 EEST)
Re: Laarge Foam RP parts RW Coleman (Wed Jul 21 1999 - 19:51:27 EEST)
Re: Off topic but off interest RW Coleman (Wed Jul 21 1999 - 20:01:25 EEST)
RPM kbarker@iware.com (Wed Jul 21 1999 - 21:32:55 EEST)
vendor attitude Elaine Hunt (Wed Jul 21 1999 - 10:20:35 EEST)
CGI Rapid Inspection Equipment Melton, Vicki L (Vicki) (Wed Jul 21 1999 - 22:34:15 EEST)
DTM made money again? Trevor James (Wed Jul 21 1999 - 22:43:18 EEST)
RP history wanted Elaine Hunt (Thu Jul 22 1999 - 03:11:34 EEST)
Formats for tesselated data Geiger, Martin (EP/QFM) (Thu Jul 22 1999 - 15:43:39 EEST)
RE: Formats for tesselated data Ping Fu (Thu Jul 22 1999 - 21:57:21 EEST)
500 Platforms Timmel, Ingrid (Thu Jul 22 1999 - 22:06:44 EEST)
Re: RPMI Symposium 2000 Marshall Burns (Tue Jul 22 1997 - 23:33:18 EEST)
Employment opportunity Glyn Churchman (Fri Jul 23 1999 - 03:55:00 EEST)
RE: Formats for tesselated data Anshuman Razdan (Fri Jul 23 1999 - 05:16:48 EEST)
Academic Vacancies Prof. P. M. Dickens (Fri Jul 23 1999 - 10:19:18 EEST)
Laser Scanning - service providers wanted Dr. Matt Murphy (Fri Jul 23 1999 - 14:02:20 EEST)
Sanders Users Group Paul Finelt (Fri Jul 23 1999 - 15:06:25 EEST)
history lesson #1 Elaine Hunt (Fri Jul 23 1999 - 04:00:27 EEST)
RPMI Symposium 2000 Tom Richards (Fri Jul 23 1999 - 13:22:12 EEST)
Employment opportunity Glyn Churchman (Fri Jul 23 1999 - 17:29:41 EEST)
Possible Virus ERIC KING (Fri Jul 23 1999 - 20:10:21 EEST)
Re: RPMI Symposium 2000 Steven (Fri Jul 23 1999 - 20:39:15 EEST)
STL file control Joe Paxton (Fri Jul 23 1999 - 21:12:54 EEST)
Press Release Bill Bankes (Fri Jul 23 1999 - 21:13:37 EEST)
RE: Possible Virus is a Hoax Caffrey, Tim (Fri Jul 23 1999 - 23:24:13 EEST)
RE: RPMI Symposium 2000 Brock Hinzmann (Fri Jul 23 1999 - 23:43:24 EEST)
Possible Virus Hoax Brock Hinzmann (Fri Jul 23 1999 - 23:58:16 EEST)
Re: RPMI Symposium 2000 Sean.Ryan@briar.ce.philips.com (Sat Jul 24 1999 - 00:21:42 EEST)
RE: STL file control Ping Fu (Sat Jul 24 1999 - 17:55:00 EEST)
Re: history lesson #1 Marshall Burns (Sat Jul 24 1999 - 22:44:01 EEST)
Convert STL file to cloud points zcmlyj (Sun Jul 25 1999 - 14:56:08 EEST)
RE: Convert STL file to cloud points Ping Fu (Sun Jul 25 1999 - 19:50:04 EEST)
RE: Convert STL file to cloud points Anshuman Razdan (Sun Jul 25 1999 - 21:47:15 EEST)
Re: 500 Platforms Ekco Plastics Pte Ltd (Mon Jul 26 1999 - 07:56:36 EEST)
How to read the normal vector Wanchai Rattanawong (Mon Jul 26 1999 - 08:46:11 EEST)
RE: How to read the normal vector Anshuman Razdan (Mon Jul 26 1999 - 10:20:55 EEST)
Re: Convert STL file to cloud points Srinivas Samavedam (Mon Jul 26 1999 - 16:10:54 EEST)
Re: Possible Virus Hoax Dewittal@aol.com (Mon Jul 26 1999 - 17:50:15 EEST)
recoating, layer thickness, resin Charly Fruth (Mon Jul 26 1999 - 19:35:48 EEST)
RE: Formats for tesselated data Stephen Skinner (Mon Jul 26 1999 - 19:50:45 EEST)
RE: Minolta 3D camera Stephen Skinner (Mon Jul 26 1999 - 20:00:55 EEST)
(no subject) Thomas George (Tue Jul 27 1999 - 14:37:50 EEST)
Info on RP Systems req'd Ray Honey (Wed Jul 28 1999 - 00:06:19 EEST)
Large SLA pricing. bvanhiel@nordson.com (Tue Jul 27 1999 - 16:45:29 EEST)
RE: good quality work r.cleypool@ind.tno.nl (Tue Jul 27 1999 - 18:08:39 EEST)
RE: Info on RP Systems req'd Richard Hague (Tue Jul 27 1999 - 18:14:28 EEST)
Reverse Engineering made easy Chris Lawrie (Tue Jul 27 1999 - 18:35:49 EEST)
RE: Reverse Engineering made easy Anshuman Razdan (Tue Jul 27 1999 - 20:15:48 EEST)
ProcureQuest Yakov style Miller, Michael W (Tue Jul 27 1999 - 22:01:51 EEST)
Re: RP in South Africa pquip@ctpop01.iafrica.com (Wed Jul 28 1999 - 00:43:00 EEST)
Re: Reverse Engineering made easy.....To each its Best. Innomation Systems & Technologies Pte. Ltd., (Wed Jul 28 1999 - 10:17:42 EEST)
Re: Seeking EDM and water-jet sources Donald Rothwell (Wed Jul 28 1999 - 00:27:16 EEST)
maize-cob model need... Gruppo Promau - Area Marketing (Wed Jul 28 1999 - 11:04:33 EEST)
Picza 3D scanner Dickman, L. Jason (Wed Jul 28 1999 - 18:26:35 EEST)
Fwd: A yummy story dedicated to all candy...... lovers Elaine Hunt (Wed Jul 28 1999 - 06:28:28 EEST)
THE I-DEAS STUDENT EDITION Elaine Hunt (Wed Jul 28 1999 - 06:44:26 EEST)
Brad Fox Glyn Churchman (Wed Jul 28 1999 - 21:08:46 EEST)
real cool site Elaine Hunt (Wed Jul 28 1999 - 09:07:34 EEST)
Reverse Engineering Source Needed Lowicki, Brian R (Wed Jul 28 1999 - 21:14:41 EEST)
Re: Brad Fox Beth P Israelnaim (Wed Jul 28 1999 - 21:53:07 EEST)
Re: Reverse Engineering Source Needed Steve Farentinos (Wed Jul 28 1999 - 20:00:35 EEST)
Re: Large SLA pricing. Ronald Jones (Wed Jul 28 1999 - 22:33:07 EEST)
Reverse Engineering made easy JENNY WRIGHT (Thu Jul 29 1999 - 00:42:53 EEST)
Feedback on SLS Windows NT Software by DTM J Alexander Mitchell (Thu Jul 29 1999 - 01:44:07 EEST)
Re: Picza 3D scanner...please find comments in Computer Art June1999 issue..... Innomation Systems & Technologies Pte. Ltd., (Thu Jul 29 1999 - 10:45:38 EEST)
Re: Brad Fox Fusioneng@aol.com (Thu Jul 29 1999 - 04:13:59 EEST)
Re: real cool site Marshall Burns (Thu Jul 29 1999 - 04:12:59 EEST)
Southern California event of interest Marshall Burns (Thu Jul 29 1999 - 04:40:54 EEST)
Re: 3D Lightyear (Humble Pie For Bob) Fusioneng@aol.com (Thu Jul 29 1999 - 06:58:29 EEST)
Reverse Engineering made easy Chris Lawrie (Thu Jul 29 1999 - 12:14:31 EEST)
AIM Tooling STUART BROWN (Thu Jul 29 1999 - 16:07:05 EEST)
RE: Reverse Engineering Source Needed Lowicki, Brian R (Thu Jul 29 1999 - 15:21:55 EEST)
Re: 3D Lightyear (Humble Pie For Bob) Scott Sutterer (Thu Jul 29 1999 - 15:49:56 EEST)
from rp person(india) Girish (APDAP) (Fri Jul 30 1999 - 03:14:48 EEST)
Re: Feedback on SLS Windows NT Software by DTM David K. Leigh (Thu Jul 29 1999 - 17:18:12 EEST)
RE: 3D Lightyear (Humble Pie For Bob) Miller, Michael W (Thu Jul 29 1999 - 17:45:25 EEST)
RE: 3D Lightyear (Humble Pie For Bob) Prof. P. M. Dickens (Fri Jul 30 1999 - 11:17:57 EEST)
FW: Reverse Engineering Source Needed Chris Lawrie (Fri Jul 30 1999 - 13:22:10 EEST)
Re: 3D Lightyear (Humble Pie For Bob) James P. Harrison (Fri Jul 30 1999 - 16:45:41 EEST)
Rapid Tooling for Composites-California Lori Hastie (Fri Jul 30 1999 - 17:09:32 EEST)
Very powerful, affordable, and easy 3D Modeling software Steve Milliren (Fri Jul 30 1999 - 17:12:50 EEST)
The EMAIL Advertising prices you wanted... allforyou@tcw.net (Fri Jul 30 1999 - 21:47:16 EEST)
USED SLA-5000 rena_surana@cemcom.com (Fri Jul 30 1999 - 22:28:17 EEST)
Announce: Free SolidView Upgrade - SolidWorks Interface Tom Vorgitch (Sat Jul 31 1999 - 03:28:11 EEST)
Re: 3D Lightyear (Humble Pie For Bob) James P. Harrison (Sun Aug 01 1999 - 06:11:23 EEST)
Re: FW: Reverse Engineering Source Needed Alain BERNARD (Sun Aug 01 1999 - 23:49:22 EEST)
Optical properties of castable clear materials Dev Thevalingam (Mon Aug 02 1999 - 03:20:16 EEST)
Y2K Failure In CNC Process Steven Pollack (Mon Aug 02 1999 - 09:30:52 EEST)
LOM Lompoxy enquiry TAN CHOR ANN, RP (Mon Aug 02 1999 - 10:22:18 EEST)
Re: Y2K Failure In CNC Process Chris Sutcliffe (Mon Aug 02 1999 - 11:19:54 EEST)
Re: Optical properties of castable clear materials main (Mon Aug 02 1999 - 15:34:22 EEST)
Re: LOM Lompoxy enquiry Steve Farentinos (Mon Aug 02 1999 - 15:14:56 EEST)
Re: Optical properties of castable clear materials Olinda Rush (Mon Aug 02 1999 - 18:16:06 EEST)
Internet and users (non RP) Elaine Hunt (Mon Aug 02 1999 - 09:05:17 EEST)
Re: Y2K Failure In CNC Process C. Brock Rooney (Mon Aug 02 1999 - 21:41:07 EEST)
RE: Y2K Failure In CNC Process KDenton@williams-int.com (Mon Aug 02 1999 - 22:08:20 EEST)
Advice Needed Webmaster (Tue Aug 03 1999 - 04:38:26 EEST)
Other Mailinglists j.gunnink@ind.tno.nl (Tue Aug 03 1999 - 10:10:40 EEST)
Further information in rapid tooling. dsuarez@cadtech.es (Tue Aug 03 1999 - 17:16:36 EEST)
virtual prototyping E.M. Groenewolt (Tue Aug 03 1999 - 17:33:08 EEST)
Kirksite dsuarez@cadtech.es (Tue Aug 03 1999 - 18:14:55 EEST)
Molds For Sale SOA Corp (Tue Aug 03 1999 - 18:24:39 EEST)
Aluminum Housing MR ALBIN A HASTBACKA (Tue Aug 03 1999 - 16:21:41 EEST)
Black Chrome Sharon Moore (Tue Aug 03 1999 - 19:22:20 EEST)
Re: Further information in rapid tooling. Nick Osborn (Tue Aug 03 1999 - 20:09:17 EEST)
Looking for used SLA-250 Max Gerdts (Tue Aug 03 1999 - 20:09:46 EEST)
Reverse engineering Alain BERNARD (Wed Aug 04 1999 - 00:00:39 EEST)
RE: Further information in rapid tooling. Jim Williams (Wed Aug 04 1999 - 01:57:25 EEST)
Mold Flow service wanted Paul Lasman (Wed Aug 04 1999 - 03:07:10 EEST)
(no subject) Sujatha (Proj. BGM) (Wed Aug 04 1999 - 17:02:54 EEST)
Re: Black Chrome Paul Finelt (Wed Aug 04 1999 - 07:19:57 EEST)
Re: Mold Flow service wanted Fusioneng@aol.com (Wed Aug 04 1999 - 07:40:16 EEST)
Surface rendering Loh Pooi Kwan (Wed Aug 04 1999 - 09:45:49 EEST)
Web Site update Michael Rees (Wed Aug 04 1999 - 11:10:28 EEST)
RP Consultant Thomas Ong (Wed Aug 04 1999 - 10:29:44 EEST)
Further information in Rapid Tooling. dsuarez@cadtech.es (Wed Aug 04 1999 - 11:11:21 EEST)
3DStudio Viz and STL brit@shadowfax.whanganui.ac.nz (Wed Aug 04 1999 - 13:59:58 EEST)
RP Educational Consultant by way of Elaine Hunt (Wed Aug 04 1999 - 02:57:03 EEST)
Affordable and Effective MASS MARKETING powerpromo@mailman.zzn.com (Thu Aug 05 1999 - 00:14:46 EEST)
further info Neugebauer, Diplomand (Thu Aug 05 1999 - 11:00:41 EEST)
Everything about RP&RT in Internet. dsuarez@cadtech.es (Thu Aug 05 1999 - 11:34:13 EEST)
Looking for reference material for prototyping Webmaster (Thu Aug 05 1999 - 04:53:58 EEST)
Re: LOM Lompoxy enquiry SIBCOINC@aol.com (Thu Aug 05 1999 - 00:29:38 EEST)
APMM October Conferense RW Coleman (Wed Aug 04 1999 - 17:27:13 EEST)
Re: Other Mailinglists James P. Harrison (Wed Aug 04 1999 - 20:54:05 EEST)
Model Making Conference Sharon Moore (Wed Aug 04 1999 - 23:51:40 EEST)
Re: 3DStudio Viz and STL SCat3D@aol.com (Wed Aug 04 1999 - 21:05:52 EEST)
Fwd: Looking for reference material for prototyping Elaine Hunt (Thu Aug 05 1999 - 15:00:49 EEST)
RE: Looking for reference material for prototyping KDenton@williams-int.com (Thu Aug 05 1999 - 15:27:48 EEST)
Quadtec Sales@MLF (Thu Aug 05 1999 - 15:42:47 EEST)
update book list August 1999 version Elaine Hunt (Thu Aug 05 1999 - 15:59:25 EEST)
Supersonic Control Experience MR ALBIN A HASTBACKA (Thu Aug 05 1999 - 14:39:23 EEST)
Conference Dates Douglas A. VanPutte (Thu Aug 05 1999 - 17:47:33 EEST)
updated web pages Elaine Hunt (Thu Aug 05 1999 - 17:47:36 EEST)
associations list Elaine Hunt (Thu Aug 05 1999 - 18:06:13 EEST)
RE: Conference Dates Deak, Steve (Thu Aug 05 1999 - 18:26:13 EEST)
3D Lightyear Graphics cards lblasch@opw-fc.com (Thu Aug 05 1999 - 11:07:02 EEST)
Re: associations list Sharon Moore (Thu Aug 05 1999 - 18:46:39 EEST)
Some quick insites on pricing issues please! Carol Farrish (Thu Aug 05 1999 - 20:30:49 EEST)
RP Project-Die Cast parts Sean M Gladieux (Thu Aug 05 1999 - 21:07:30 EEST)
Re: Everything about RP&RT in Internet. Marshall Burns (Thu Aug 05 1999 - 21:13:39 EEST)
Lynda Hurley of Lockheed Martin Marshall Burns (Thu Aug 05 1999 - 21:37:17 EEST)
Re: RP Project-Die Cast parts Marshall Burns (Thu Aug 05 1999 - 21:36:42 EEST)
Re: RP Project-Die Cast parts Elaine Hunt (Thu Aug 05 1999 - 21:54:35 EEST)
sand casting Todd Reese (Fri Aug 06 1999 - 01:09:47 EEST)
Prototype Service Request Ronald Jones (Thu Aug 05 1999 - 23:49:27 EEST)
Re: 3D Lightyear Graphics cards Fusioneng@aol.com (Fri Aug 06 1999 - 00:49:45 EEST)
Insite on pricing strategy Carol Farrish (Fri Aug 06 1999 - 01:04:00 EEST)
wanted human lower jaw 3D data Bruce Okkema (Fri Aug 06 1999 - 01:47:42 EEST)
Anyone need a job? Dan Davis (Fri Aug 06 1999 - 03:28:18 EEST)
RE: RP Paper Prof. P. M. Dickens (Fri Aug 06 1999 - 03:33:18 EEST)
Re: RP for Rapid Manufacturing vs. Hybrid approach Nick Osborn (Fri Aug 06 1999 - 11:42:41 EEST)
re:steel test jim (Fri Aug 06 1999 - 12:03:41 EEST)
Fwd: RE: RP Paper Elaine Hunt (Fri Aug 06 1999 - 15:19:32 EEST)
Re: from rp person(india) Rudolf Schenker (Fri Aug 06 1999 - 15:22:58 EEST)
Re: re:steel test Nick Osborn (Fri Aug 06 1999 - 15:59:40 EEST)
Golf Club file Guy.Bourdeau@coulter.com (Fri Aug 06 1999 - 17:06:34 EEST)
Re: Prototype Service Request aaroflex (Fri Aug 06 1999 - 18:10:14 EEST)
RP Project-Die Cast parts Halford, Ben (Fri Aug 06 1999 - 17:34:45 EEST)
Re: RP Paper Ronald Jones (Fri Aug 06 1999 - 19:52:24 EEST)
Suscribe to list... JNM TOOL & MANUFACTURE INC (Fri Aug 06 1999 - 20:51:49 EEST)
Y2K / Friday Info Jim Rollins (Fri Aug 06 1999 - 20:52:23 EEST)
Fabber manufacturing Marshall Burns (Fri Aug 06 1999 - 21:53:56 EEST)
RE: RP Paper Lightman, Allan J (Fri Aug 06 1999 - 21:57:59 EEST)
FW: RP Paper O'Reilly, Sean (S.B.) (Fri Aug 06 1999 - 23:28:20 EEST)
RE: Fabber manufacturing KDenton@williams-int.com (Fri Aug 06 1999 - 23:38:51 EEST)
FW: O'Reilly, Sean (S.B.) (Fri Aug 06 1999 - 23:38:29 EEST)
re: Fabber manufacturing bvanhiel@nordson.com (Fri Aug 06 1999 - 22:27:32 EEST)
Re: Fabber manufacturing Michael Vincek (Sat Aug 07 1999 - 00:59:47 EEST)
RE: Fabber manufacturing Spielman, Roger L (Sat Aug 07 1999 - 01:05:02 EEST)
RE: Surfacer vs IcemSurf vs.... Paraform Brian Kissel (Sat Aug 07 1999 - 01:26:08 EEST)
Re: RP Paper Ronald Jones (Sat Aug 07 1999 - 01:32:22 EEST)
RE: RP for Rapid Manufacturing vs. Hybrid approach Prof. P. M. Dickens (Sat Aug 07 1999 - 01:36:11 EEST)
FIND BUYERS,SUPPLIERS OF YOUR PRODUCTS,SEND FAXES WORLDWIDE FOR JUST RS.20/- MS RAMA DIXIT (Sat Aug 07 1999 - 05:21:06 EEST)
OFF TOPIC -- new homicide?!? Gabe Clark (Sat Aug 07 1999 - 07:25:56 EEST)
Re: .stl to .sli Rajesh Khurana (Sat Aug 07 1999 - 14:39:47 EEST)
RE: Fabber manufacturing KDenton@williams-int.com (Sat Aug 07 1999 - 16:30:08 EEST)
Re: OFF TOPIC -- new homicide?!? Charles Overy (Sat Aug 07 1999 - 21:39:47 EEST)
WE WANTTO BUY SOFTWARE r.swartz@angelfire.com (Sun Aug 08 1999 - 07:55:06 EEST)
Fwd: Re: .stl to .sli Rajesh Khurana (Sun Aug 08 1999 - 18:03:16 EEST)
Re: RP Project-Die Cast parts Charles Overy (Mon Aug 09 1999 - 08:39:08 EEST)
re: OFF TOPIC -- new homicide?!? bvanhiel@nordson.com (Mon Aug 09 1999 - 16:05:56 EEST)
LETS MAKE CAN-DO PARTS RP Solutions (Mon Aug 09 1999 - 16:24:15 EEST)
RPMI Symposium 2000 Reggie Ponder (Mon Aug 09 1999 - 17:39:53 EEST)
Rapid Tooling Info Ron Clemons (Mon Aug 09 1999 - 12:45:07 EEST)
NOW GET BUYERS EVERY WEEK MS SUNITA RAJE (Mon Aug 09 1999 - 19:01:54 EEST)
NOW GET BUYERS EVERY WEEK MS SUNITA RAJE (Mon Aug 09 1999 - 22:20:05 EEST)
RE: LETS MAKE CAN-DO PARTS Brock Hinzmann (Tue Aug 10 1999 - 00:50:03 EEST)
Re: .stl to .sli ATiburon@aol.com (Tue Aug 10 1999 - 03:19:17 EEST)
call for papers - ANTEC 2000 B. J. Arnold-Feret (Tue Aug 10 1999 - 05:32:04 EEST)
Poster for FDM and SLA Lin Liutong (Tue Aug 10 1999 - 08:40:51 EEST)
Re: Poster for FDM and SLA Marshall Burns (Tue Aug 10 1999 - 14:25:19 EEST)
Ian Gibson Marshall Burns (Tue Aug 10 1999 - 15:24:20 EEST)
Vacuum Pump M.C. MOOLMAN (Tue Aug 10 1999 - 16:09:11 EEST)
Re: Vacuum Pump Michael Tsenter (Tue Aug 10 1999 - 18:00:19 EEST)
pdickens@dmu.ac.uk Tom Richards (Tue Aug 10 1999 - 14:13:14 EEST)
Re: Vacuum Pump Rudolf Schenker (Tue Aug 10 1999 - 20:01:25 EEST)
Re: RP Consultant (Thomas Ong) Steven C. Beck (Tue Aug 10 1999 - 20:52:14 EEST)
Re: RP Consultant (Thomas Ong) Steven (Tue Aug 10 1999 - 23:09:26 EEST)
Re: RP Consultant (Thomas Ong) Marshall Burns (Wed Aug 11 1999 - 07:03:01 EEST)
Re: RP Consultant (Thomas Ong) Steven Pollack (Wed Aug 11 1999 - 08:36:36 EEST)
requesting help Ed (Wed Aug 11 1999 - 09:28:12 EEST)
RE: Y2K / Friday Info John Wright (Wed Aug 11 1999 - 11:51:21 EEST)
General Info Need John Makuch (Wed Aug 11 1999 - 15:37:48 EEST)
Re: Y2K / Friday Info Paul Hettrick (Wed Aug 11 1999 - 15:41:36 EEST)
DURAFORM POWDER Stephane Carpentier (Wed Aug 11 1999 - 15:43:12 EEST)
Re: Poster for FDM and SLA EdGrenda@aol.com (Wed Aug 11 1999 - 16:15:28 EEST)
duraform powder Stephane Carpentier (Wed Aug 11 1999 - 16:07:19 EEST)
Re: General Info Need Fusioneng@aol.com (Wed Aug 11 1999 - 18:44:16 EEST)
RE: pdickens@dmu.ac.uk Tom Richards (Wed Aug 11 1999 - 16:04:25 EEST)
Re: RP Consultant (Thomas Ong) Tom Richards (Wed Aug 11 1999 - 16:16:22 EEST)
Re: requesting help Tom Richards (Wed Aug 11 1999 - 16:18:47 EEST)
FW: Poster for FDM and SLA (Thank you for all the respond) Lin Liutong (Thu Aug 12 1999 - 04:38:27 EEST)
re: requesting help Ed (Thu Aug 12 1999 - 09:03:05 EEST)
Student Projects Needed - FDM 2000, Unigraphics Solutions, SolidW orks98+ James Folkestad (Thu Aug 12 1999 - 19:15:54 EEST)
Student Projects Needed! - FDM 2000, Unigraphics, SolidWorks98+ James Folkestad (Thu Aug 12 1999 - 19:08:56 EEST)
Lost contact - Jerry Vanoverberghe, BARCO NV Mark Littlewood (Fri Aug 13 1999 - 12:50:48 EEST)
y2k update Spielman, Roger L (Fri Aug 13 1999 - 18:31:04 EEST)
RE: y2k update Steve Stewart (Fri Aug 13 1999 - 22:02:15 EEST)
Formtech vacuum formers Dan Davis (Sat Aug 14 1999 - 00:16:13 EEST)
Re: Formtech vacuum formers Michael Tsenter (Sat Aug 14 1999 - 02:09:05 EEST)
UnigraphicsTOIgs iginom@srcnet.it (Sat Aug 14 1999 - 18:11:12 EEST)
Re: UnigraphicsTOIgs NxInxs (Sat Aug 14 1999 - 19:51:41 EEST)
Re: Y2K / Friday Info Paul Burr (Sun Aug 15 1999 - 04:16:40 EEST)
Siggraph 99 Report Michael Rees (Mon Aug 16 1999 - 03:27:52 EEST)
RE: Siggraph 99 Report Anshuman Razdan (Mon Aug 16 1999 - 04:15:12 EEST)
RE: Siggraph 99 Report KDenton@williams-int.com (Mon Aug 16 1999 - 15:10:03 EEST)
Fwd: Re: .stl to .sli Elaine Hunt (Mon Aug 16 1999 - 15:50:50 EEST)
Please subscribe me to the R-P list J.Mekking@gearbox.prc.tno.nl (Mon Aug 16 1999 - 17:03:05 EEST)
Re: Re: .stl to .sli main (Mon Aug 16 1999 - 17:02:52 EEST)
SFF conference Elaine Hunt (Mon Aug 16 1999 - 21:36:06 EEST)
Shareware for making STL file from iges files Sunil Yadav (Tue Aug 17 1999 - 02:15:00 EEST)
Re: SFF conference ATiburon@aol.com (Tue Aug 17 1999 - 02:36:33 EEST)
Re: Siggraph 99 Report Marshall Burns (Tue Aug 17 1999 - 02:36:08 EEST)
RE: Shareware for making STL file from iges files TAN CHOR ANN, RP (Tue Aug 17 1999 - 05:32:19 EEST)
RE: Shareware for making STL file from iges files charriere eric (Tue Aug 17 1999 - 10:18:44 EEST)
Re: Shareware for making STL file from iges files C. Brock Rooney (Tue Aug 17 1999 - 10:51:09 EEST)
Re: Shareware for making STL file from iges files Martin Stevens (Tue Aug 17 1999 - 13:56:14 EEST)
Rapid Prototyping & Manufacturing 2000 Conference Call for Speake rs Marina Shara (Tue Aug 17 1999 - 21:20:45 EEST)
Fall semester RP Exam Elaine Hunt (Tue Aug 17 1999 - 23:01:49 EEST)
Re: Fall semester RP Exam Steve Farentinos (Tue Aug 17 1999 - 23:37:08 EEST)
Scanning/digitizing Steve Ettelson (Wed Aug 18 1999 - 01:36:56 EEST)
RP Questionnaire rajendra manchanda (Wed Aug 18 1999 - 01:31:02 EEST)
Re: Fall semester RP Exam lblasch@opw-fc.com (Tue Aug 17 1999 - 18:12:20 EEST)
Re: Fall semester RP Exam Greg Pettengill (Wed Aug 18 1999 - 03:21:22 EEST)
Re: Fall semester RP Exam SiderWhite (Wed Aug 18 1999 - 07:43:28 EEST)
remove from list Houghton, Mark (Wed Aug 18 1999 - 09:45:23 EEST)
Everything about RP&RT in Internet II. dsuarez@cadtech.es (Wed Aug 18 1999 - 13:10:07 EEST)
(no subject) Rogerio Ramires (Wed Aug 18 1999 - 13:15:03 EEST)
remove from list Marc Soucy (Wed Aug 18 1999 - 15:32:29 EEST)
Tube Bending Linn, Mark [COPE/HQ] (Wed Aug 18 1999 - 17:06:00 EEST)
The Studio at Siggraph '99 Terry T. Wohlers (Wed Aug 18 1999 - 17:41:29 EEST)
Re: Scanning/digitizing Tom Richards (Wed Aug 18 1999 - 15:52:00 EEST)
ROLAND PICZA/MODELA MR ALBIN A HASTBACKA (Wed Aug 18 1999 - 18:18:25 EEST)
Re: Scanning/digitizing Kelly Hand (Thu Aug 19 1999 - 09:19:55 EEST)
RE: The Studio at Siggraph '99 Anshuman Razdan (Thu Aug 19 1999 - 07:57:20 EEST)
Injection Mold needed for Jewelry Ricky Low (Thu Aug 19 1999 - 08:34:45 EEST)
Re: The Studio at Siggraph '99 Marshall Burns (Thu Aug 19 1999 - 10:10:30 EEST)
test answers Elaine Hunt (Thu Aug 19 1999 - 15:44:23 EEST)
Re: test answers David Retallick (Thu Aug 19 1999 - 16:16:18 EEST)
Symposium 2000 survey results Reggie Ponder (Thu Aug 19 1999 - 17:42:41 EEST)
RE: Injection Mold needed for Jewelry Jim Williams (Thu Aug 19 1999 - 18:35:13 EEST)
Re: Injection Mold needed for Jewelry Nick Osborn (Thu Aug 19 1999 - 19:18:34 EEST)
Re: Injection Mold needed for Jewelry Jamie Ledin (Thu Aug 19 1999 - 19:23:07 EEST)
Ballistic Particle Manufacturing (BPM) PROFORM AG (Thu Aug 19 1999 - 20:03:11 EEST)
Fwd: Ballistic Particle Manufacturing (BPM) Elaine Hunt (Thu Aug 19 1999 - 20:18:46 EEST)
Friday Humor, a little early ! Mark Wynn (Thu Aug 19 1999 - 20:23:42 EEST)
Re: Fall semester RP Exam cwho (Thu Aug 19 1999 - 20:30:10 EEST)
Re: Injection Mold needed for Jewelry Tom Richards (Thu Aug 19 1999 - 16:37:22 EEST)
A.D. Bhatt Terry T. Wohlers (Thu Aug 19 1999 - 21:22:48 EEST)
paintable mold release PDSI (Fri Aug 20 1999 - 00:40:05 EEST)
RP Technology Tree bvanhiel@nordson.com (Thu Aug 19 1999 - 21:36:08 EEST)
Re: paintable mold release Rick Klepacz (Thu Aug 19 1999 - 22:20:51 EEST)
Re: paintable mold release Fusioneng@aol.com (Fri Aug 20 1999 - 01:53:46 EEST)
Re: ROLAND PICZA/MODELA Dasisgoot@aol.com (Fri Aug 20 1999 - 03:33:32 EEST)
Re: ROLAND PICZA/MODELA Jason Dickman (Fri Aug 20 1999 - 06:24:27 EEST)
(no subject) icable (Fri Aug 20 1999 - 06:50:05 EEST)
RE: Injection Mold needed for Jewelry Anton H.J. Gerrits (Fri Aug 20 1999 - 10:47:08 EEST)
Another TLA for you Mark Littlewood (Fri Aug 20 1999 - 11:34:58 EEST)
RP evolution. dsuarez@cadtech.es (Fri Aug 20 1999 - 12:22:24 EEST)
Fwd: Another TLA for you Elaine Hunt (Fri Aug 20 1999 - 14:45:09 EEST)
Re: RP Technology Tree EdGrenda@aol.com (Fri Aug 20 1999 - 16:16:49 EEST)
SLA 500 Thomas Wickson (Fri Aug 20 1999 - 18:26:31 EEST)
Re: test answers Cary Rosenberg (Fri Aug 20 1999 - 19:10:43 EEST)
Re: test answers & contibutions Elaine Hunt (Fri Aug 20 1999 - 20:14:25 EEST)
Z Corp presence at the Pro User Conference in Texas Kate Moore (Fri Aug 20 1999 - 20:19:04 EEST)
complex measurements of STL files Gabe Clark (Sat Aug 21 1999 - 01:11:32 EEST)
Re: complex measurements of STL files Tom Vorgitch (Sat Aug 21 1999 - 01:45:11 EEST)
Re: complex measurements of STL files Michael Tsenter (Sat Aug 21 1999 - 02:06:00 EEST)
Advertise your products to thousands of Internet users Ms Meena Puri (Sat Aug 21 1999 - 07:27:23 EEST)
eBay Registration reg@ebay.com (Sat Aug 21 1999 - 11:21:01 EEST)
Welcome to drugstore.com! Customer Care (Sat Aug 21 1999 - 11:25:25 EEST)
Your Amazon.com Delivers subscription info@amazon.com (Sat Aug 21 1999 - 11:29:32 EEST)
Metro Area Volleyball News Vol. 2, No. 5; August 1999 Mike (Sat Aug 21 1999 - 11:34:38 EEST)
Re: Injection Mold needed for Jewelry Paul Finelt (Sun Aug 22 1999 - 05:01:52 EEST)
Re: Injection Mold needed for Jewelry Fusioneng@aol.com (Sun Aug 22 1999 - 08:11:49 EEST)
Re: Injection Mold needed for Jewelry Paul Finelt (Mon Aug 23 1999 - 00:49:27 EEST)
Fwd: Another TLA for you Terry T. Wohlers (Mon Aug 23 1999 - 01:47:36 EEST)
About four-point bending strength Qingbin Liu (Mon Aug 23 1999 - 07:06:41 EEST)
Re: Fwd: Another TLA for you Carsten Freyer (Mon Aug 23 1999 - 13:37:47 EEST)
non-rp but worth reading... Elaine Hunt (Mon Aug 23 1999 - 14:43:28 EEST)
Fwd: Another TLA for you Elaine Hunt (Mon Aug 23 1999 - 14:55:52 EEST)
A 15th century Michael Rees? Marshall Burns (Mon Aug 23 1999 - 18:43:56 EEST)
Duerer Tobias Wasser (Mon Aug 23 1999 - 19:46:19 EEST)
Irrelevant mailing lists Sharon Moore (Mon Aug 23 1999 - 20:15:10 EEST)
Re: Irrelevant mailing lists @baxter.com (Mon Aug 23 1999 - 21:42:07 EEST)
EDM electrode technology Larry Dosser (Mon Aug 23 1999 - 22:27:29 EEST)
Receipt of your email to eBay Customer Support (KMM3811010C0KM) eBay Customer Support (Mon Aug 23 1999 - 23:17:49 EEST)
Amazon.com Delivers Travel travel-editor@amazon.com (Tue Aug 24 1999 - 00:02:53 EEST)
Amazon.com Delivers Auctions: Books books-auction-editor@amazon.com (Tue Aug 24 1999 - 00:21:25 EEST)
Amazon.com Subscriptions Login info@amazon.com (Tue Aug 24 1999 - 00:47:55 EEST)
Amazon.com Delivers James Burke science-and-nature-editor@amazon.com (Mon Aug 23 1999 - 23:55:19 EEST)
Amazon.com Subscriptions Login info@amazon.com (Tue Aug 24 1999 - 00:54:28 EEST)
Please add lonepeak (Tue Aug 24 1999 - 01:13:05 EEST)
Amazon.com Subscriptions Login info@amazon.com (Tue Aug 24 1999 - 01:05:34 EEST)
Amazon.com Delivers Jesse Green biographies-editor@amazon.com (Tue Aug 24 1999 - 00:02:23 EEST)
Re: Irrelevant mailing lists Ronald Jones (Tue Aug 24 1999 - 01:41:17 EEST)
Amazon.com Delivers Auctions: Bizarre Bazaar bizarre-auction-editor@amazon.com (Tue Aug 24 1999 - 01:39:00 EEST)
Re: Irrelevant mailing lists Ranji Vaidyanathan (Tue Aug 24 1999 - 02:31:34 EEST)
Re: Irrelevant mailing lists ATiburon@aol.com (Tue Aug 24 1999 - 03:42:41 EEST)
Amazon.com Subscriptions Changes info@amazon.com (Tue Aug 24 1999 - 04:23:26 EEST)
To much spam... Douglas Bucci (Tue Aug 24 1999 - 05:11:24 EEST)
Stop the spamming to http://ltk.hut.fi/rp-ml/ Ranji Vaidyanathan (Tue Aug 24 1999 - 08:02:10 EEST)
direct all complaints to by way of Elaine Hunt (Tue Aug 24 1999 - 14:49:23 EEST)
Fw: remove Elizabeth Nitz (Tue Aug 24 1999 - 15:00:32 EEST)
Amazon.com Subscriptions Changes info@amazon.com (Tue Aug 24 1999 - 15:28:30 EEST)
Amazon.com Subscriptions Changes info@amazon.com (Tue Aug 24 1999 - 16:16:53 EEST)
3D Lightyear and Buildstation on SLA 500s KDenton@williams-int.com (Tue Aug 24 1999 - 16:23:58 EEST)
New Address PTE Distribution (Tue Aug 24 1999 - 16:34:55 EEST)
Fw: Fw: remove Elizabeth Nitz (Tue Aug 24 1999 - 17:02:31 EEST)
RE: direct all complaints to Justin Kidder (Tue Aug 24 1999 - 17:52:16 EEST)
site against spamming (not an endorsement) Elaine Hunt (Tue Aug 24 1999 - 18:39:38 EEST)
Re: direct all complaints to Ranji Vaidyanathan (Tue Aug 24 1999 - 19:05:28 EEST)
Re: direct all complaints to Scott A Taper (Tue Aug 24 1999 - 19:34:31 EEST)
Re: direct all complaints to Mira Sahney (Tue Aug 24 1999 - 20:23:08 EEST)
RE: direct all complaints to Justin Kidder (Tue Aug 24 1999 - 20:40:29 EEST)
Your Amazon.com Inquiry orders@amazon.com (Tue Aug 24 1999 - 21:02:44 EEST)
Spam and stuff KDenton@williams-int.com (Tue Aug 24 1999 - 22:01:02 EEST)
Architectural applications B.J. Novitski (Tue Aug 24 1999 - 23:12:29 EEST)
Re: Architectural applications Marshall Burns (Tue Aug 24 1999 - 22:40:19 EEST)
Anti-Spam... Douglas Bucci (Tue Aug 24 1999 - 22:56:16 EEST)
Re: Spam and stuff David B. Russell (Tue Aug 24 1999 - 23:07:57 EEST)
RE: direct all complaints to C. Brock Rooney (Tue Aug 24 1999 - 23:20:29 EEST)
RE: 3D Lightyear and Buildstation on SLA 500s Pierce, Steven E (Tue Aug 24 1999 - 23:26:05 EEST)
Att Molly Price; Re: Your Amazon.com Inquiry Delft Spline Systems (Tue Aug 24 1999 - 22:54:37 EEST)
Re: Another TLA for you blair (Wed Aug 25 1999 - 01:56:18 EEST)
I got rid of one!!! Gabe Clark (Wed Aug 25 1999 - 02:42:19 EEST)
Web Based RP discussion page Jeffrey D. Elliott (Wed Aug 25 1999 - 05:10:42 EEST)
Re: Spam and stuff Paul Burr (Wed Aug 25 1999 - 04:50:48 EEST)
Wall chart for rapid prototyping. ivar@vinn.no (Wed Aug 25 1999 - 10:11:21 EEST)
Fwd: RE: 3D Lightyear and Buildstation on SLA 500s Elaine Hunt (Wed Aug 25 1999 - 14:41:31 EEST)
Re: To much spam... Michael Vincek (Wed Aug 25 1999 - 16:08:11 EEST)
Looking for Jo Frantz Mark Littlewood (Wed Aug 25 1999 - 16:14:45 EEST)
Call for Speakers Linda Johnson (Wed Aug 25 1999 - 16:38:19 EEST)
Re: complex measurements of STL files Innomation Systems & Technologies Pte. Ltd., (Thu Aug 26 1999 - 00:58:35 EEST)
Re: Z Corp presence at the Pro User Conference in Texas Innomation Systems & Technologies Pte. Ltd., (Thu Aug 26 1999 - 01:02:39 EEST)
RE: RE: 3D Lightyear and Buildstation on SLA 500s Pierce, Steven E (Wed Aug 25 1999 - 17:51:55 EEST)
NFS for NT Trevor James (Wed Aug 25 1999 - 21:58:31 EEST)
Other web based RP discussion pages Jim Payne (Wed Aug 25 1999 - 22:33:48 EEST)
Fwd: Other web based RP discussion pages Elaine Hunt (Wed Aug 25 1999 - 22:39:41 EEST)
Re: NFS for NT SCat3D@aol.com (Wed Aug 25 1999 - 23:18:31 EEST)
RE: NFS for NT Rodrigo Pedron (Thu Aug 26 1999 - 00:28:28 EEST)
Grafoam Jim Burt (Thu Aug 26 1999 - 00:41:14 EEST)
Re: NFS for NT Bob Zajeski (Thu Aug 26 1999 - 00:28:06 EEST)
RE: NFS for NT SCHAEFER,NICK (HP-Boise,ex1) (Thu Aug 26 1999 - 01:19:37 EEST)
remove from list rops (Thu Aug 26 1999 - 05:40:01 EEST)
Re: Irrelevant mailing lists (fwd by owner) Rapid Dude (Thu Aug 26 1999 - 07:49:04 EEST)
Re: RP-ML Egroups Option (fwd by owner) Rapid Dude (Thu Aug 26 1999 - 07:49:29 EEST)
Re: Grafoam Robert Jaquiss (Thu Aug 26 1999 - 07:52:12 EEST)
Re: Grafoam Marshall Burns (Thu Aug 26 1999 - 09:01:06 EEST)
Re: Irrelevant mailing lists (fwd by owner) Marshall Burns (Thu Aug 26 1999 - 09:17:45 EEST)
stepping out of the shadows... Rapid Dude (Thu Aug 26 1999 - 10:46:19 EEST)
General Info Need John Makuch (Thu Aug 26 1999 - 11:06:57 EEST)
Reverse Engineering John Makuch (Thu Aug 26 1999 - 11:25:54 EEST)
Fwd: Your Amazon.com Inquiry Delft Spline Systems (Thu Aug 26 1999 - 11:09:39 EEST)
Reverse Enginnering Berger, Norbert (Thu Aug 26 1999 - 14:15:40 EEST)
rp-ml and spamming Berndt Holmer (Thu Aug 26 1999 - 13:09:44 EEST)
Re: NFS for NT Paul Finelt (Thu Aug 26 1999 - 15:08:33 EEST)
Remove from list Kitty Seerden (Thu Aug 26 1999 - 15:24:59 EEST)
RP Material Properties Gerard Ryder (Thu Aug 26 1999 - 15:39:47 EEST)
SLA 250 / FTP Scott -Scooter- Sutterer (Thu Aug 26 1999 - 15:47:21 EEST)
Re: SLA 250 / FTP main (Thu Aug 26 1999 - 16:10:32 EEST)
RE: SLA 250 / FTP Deak, Steve (Thu Aug 26 1999 - 16:45:48 EEST)
scanners for part verification Hoerner, Brian - GCP (Thu Aug 26 1999 - 16:50:51 EEST)
Looking for a LOM operator Impact - Doug Johnson (Thu Aug 26 1999 - 17:03:38 EEST)
Re: RP Material Properties Bart Mol (Thu Aug 26 1999 - 17:15:12 EEST)
reverse engineering effectiveness lisa (Thu Aug 26 1999 - 18:45:00 EEST)
fdm process Hoerner, Brian - GCP (Thu Aug 26 1999 - 20:29:26 EEST)
Re: Reverse Engineering Jack Feng (Thu Aug 26 1999 - 20:39:33 EEST)
Re: Reverse Engineering Ashwin Hattiangadi (Thu Aug 26 1999 - 22:53:01 EEST)
Re: fdm process Marshall Burns (Thu Aug 26 1999 - 23:02:23 EEST)
Remove from list blair (Fri Aug 27 1999 - 03:03:29 EEST)
Subject: It is possible: Draftangles on STL product data. Prototyping@ind.tno.nl (Fri Aug 27 1999 - 09:41:24 EEST)
Re: fdm process Bart Mol (Fri Aug 27 1999 - 10:36:43 EEST)
Re: Reverse Engineering Nick Osborn (Fri Aug 27 1999 - 12:28:08 EEST)
Need insight... robert hogans (Fri Aug 27 1999 - 17:53:15 EEST)
Re: Need insight... Delft Spline Systems (Fri Aug 27 1999 - 22:20:42 EEST)
Duraform + Nylon Composite? Miller, Michael W (Sat Aug 28 1999 - 02:49:33 EEST)
Re: Duraform + Nylon Composite? David K. Leigh (Sat Aug 28 1999 - 15:55:49 EEST)
Another Rapid Prototype Web site for info and links IJ George (Sun Aug 29 1999 - 11:35:28 EEST)
[Fwd: Prototyping bottles] Pedro Garayo (Sun Aug 29 1999 - 19:09:08 EEST)
Latest MIT Patent on R ChathamRes@aol.com (Sun Aug 29 1999 - 21:15:27 EEST)
Re: [Fwd: Prototyping bottles] Greg Pettengill (Sun Aug 29 1999 - 22:15:12 EEST)
Re: Latest MIT Patent on R Gill Barequet (Mon Aug 30 1999 - 00:24:46 EEST)
Re: Latest MIT Patent on R bo yang me stnt (Mon Aug 30 1999 - 01:32:23 EEST)
Prototyping bottles Pedro Garayo (Fri Aug 27 1999 - 13:05:10 EEST)
High intelligent RE software g.knoppers@ind.tno.nl (Fri Aug 27 1999 - 12:56:20 EEST)
Automated Pricing for 3D Models Craig Silverman (Mon Aug 30 1999 - 09:52:43 EEST)
Re: High intelligent RE software Alain BERNARD (Mon Aug 30 1999 - 11:08:26 EEST)
Re: [Fwd: Prototyping bottles] Delft Spline Systems (Mon Aug 30 1999 - 10:33:32 EEST)
materials Rose Mary Parker (Fri Aug 27 1999 - 18:13:07 EEST)
High intelligent RE software g.knoppers@ind.tno.nl (Fri Aug 27 1999 - 18:45:15 EEST)
RE: General Info Need Spielman, Roger L (Fri Aug 27 1999 - 19:43:22 EEST)
Re: Reverse Enginnering Alain BERNARD (Mon Aug 30 1999 - 12:01:35 EEST)
Re: Prototyping bottles Erkut NEGIS (Mon Aug 30 1999 - 12:04:35 EEST)
Re: materials Greg Pettengill (Mon Aug 30 1999 - 12:41:01 EEST)
Re: Prototyping bottles Rudolf Schenker[Pr.Tech.(Eng)] (Mon Aug 30 1999 - 12:51:58 EEST)
Remove from list Todd Schuett (Mon Aug 30 1999 - 13:53:31 EEST)
Prototyping bottles Pedro Garayo (Mon Aug 30 1999 - 14:35:19 EEST)
Re: Remove from list tricia myers (Mon Aug 30 1999 - 15:11:14 EEST)
Re: Prototyping bottles Delft Spline Systems (Mon Aug 30 1999 - 15:56:16 EEST)
Re: Grafoam James P Harison (Mon Aug 30 1999 - 16:24:23 EEST)
Common Wealth Scott -Scooter- Sutterer (Mon Aug 30 1999 - 19:47:46 EEST)
Re: Common Wealth Marshall Burns (Mon Aug 30 1999 - 20:17:01 EEST)
RE: Common Wealth TRAVIS BEHARA (Mon Aug 30 1999 - 20:36:22 EEST)
autocad solid dwg. Sales@MLF (Mon Aug 30 1999 - 22:45:20 EEST)
Morgan Press PTE Distribution (Mon Aug 30 1999 - 22:47:28 EEST)
4 & 5 Axis machining Impact - Doug Johnson (Mon Aug 30 1999 - 23:14:07 EEST)
LOM2030H for sale Miller, Michael W (Mon Aug 30 1999 - 23:26:39 EEST)
RFQ for models of blow molded cases RoyJRATC@aol.com (Mon Aug 30 1999 - 23:29:20 EEST)
RE: Morgan Press Giorgos Hatzilias (Mon Aug 30 1999 - 23:26:37 EEST)
Re: autocad solid dwg. Timothy J. Gornet (Mon Aug 30 1999 - 23:59:31 EEST)
Re: autocad solid dwg. C. Brock Rooney (Tue Aug 31 1999 - 01:52:43 EEST)
Re: 4 & 5 Axis machining bo yang me stnt (Tue Aug 31 1999 - 02:25:15 EEST)
RE: autocad solid dwg. Kwok Kai Thong, Mariner (Tue Aug 31 1999 - 03:46:11 EEST)
RE: autocad solid dwg. Kwok Kai Thong, Mariner (Tue Aug 31 1999 - 04:19:05 EEST)
Remove from list. Ivan Ho (Mon Aug 30 1999 - 18:58:57 EEST)
FDM quality test part Valter Beal (Mon Aug 30 1999 - 18:13:30 EEST)
RFQ for models of blow molded cases RoyJRATC@aol.com (Mon Aug 30 1999 - 18:32:35 EEST)
4 & 5 Axis machining Impact - Doug Johnson (Mon Aug 30 1999 - 17:43:27 EEST)
RFQ for models of blow molded cases Ekco Plastics Pte Ltd (Tue Aug 31 1999 - 11:44:09 EEST)
Investment casting Garcia Romero, Ana (Tue Aug 31 1999 - 16:53:32 EEST)
RP-ml Garcia Romero, Ana (Tue Aug 31 1999 - 17:03:30 EEST)
4 and 5 axis machine Speer, Robert J. (Tue Aug 31 1999 - 15:16:46 EEST)
Investment casting Garcia Romero, Ana (Tue Aug 31 1999 - 17:12:55 EEST)
Slightly OT - Laser Materials Processing Dr. Matt Murphy (Tue Aug 31 1999 - 16:17:22 EEST)
investment casting Garcia Romero, Ana (Tue Aug 31 1999 - 18:09:31 EEST)
Conference - Reverse Engineering Thomas Fuglsang Andersen (Tue Aug 31 1999 - 16:30:15 EEST)
Re: Investment casting Nick Osborn (Tue Aug 31 1999 - 17:07:51 EEST)
Prototypes in NORYL GFN2SE1 b.kooijmans@ind.tno.nl (Tue Aug 31 1999 - 17:30:59 EEST)
Investment Casting - MCP & Quickcast. dsuarez@cadtech.es (Tue Aug 31 1999 - 18:03:36 EEST)
Need Sanders model built Dick Caverly (Tue Aug 31 1999 - 18:57:10 EEST)
Casting Z-Corp Parts Vdub1963@aol.com (Tue Aug 31 1999 - 20:04:11 EEST)
Re: Prototypes in NORYL GFN2SE1 Nick Osborn (Tue Aug 31 1999 - 20:17:52 EEST)
Job Posting Ronald Jones (Tue Aug 31 1999 - 20:55:14 EEST)
RE: Casting Z-Corp Parts Bill Bellows (Tue Aug 31 1999 - 20:54:28 EEST)
NOTICE: eBay Registration Suspension - Contact information - rp-ml@ltk.hut.fi support@ebay.com (Tue Aug 31 1999 - 18:08:51 EEST)
Don't miss these the opportunity to learn from and interface with industry leaders!!! Marina Shara (Tue Aug 31 1999 - 21:48:54 EEST)
Users group conference 2000 Pierce, Steven E (Tue Aug 31 1999 - 22:22:09 EEST)
Re: Job Posting ATiburon@aol.com (Wed Sep 01 1999 - 00:42:09 EEST)
Re: Job Posting Marshall Burns (Wed Sep 01 1999 - 02:05:19 EEST)
FREE HOT VIDEO CHAT Lana Lou (Wed Sep 01 1999 - 07:17:52 EEST)
HOT sonja (Wed Sep 01 1999 - 08:18:37 EEST)
RE: Users group conference 2000 Deak, Steve (Wed Sep 01 1999 - 05:54:27 EEST)
Fractional Ownership David K. Leigh (Wed Sep 01 1999 - 06:26:53 EEST)
Re: FW: Spam (rp-ml@ltk.hut.fi -mailing list) (fwd) Rapid Dude (Wed Sep 01 1999 - 07:28:53 EEST)
Imageware Bernard Parrenin (Wed Sep 01 1999 - 09:13:28 EEST)
RE: FREE HOT VIDEO CHAT Popat Ajay AH (Wed Sep 01 1999 - 11:42:15 EEST)
WKI Pedro Garayo (Wed Sep 01 1999 - 12:44:33 EEST)
Re: HOT Jens Hoffmann (Wed Sep 01 1999 - 14:05:03 EEST)
Re: HOT Dr. Matt Murphy (Wed Sep 01 1999 - 13:44:57 EEST)
Stereolithography Limitations J.S.Tarrant@rl.ac.uk (Wed Sep 01 1999 - 15:21:47 EEST)
Re: HOT Paul Burr (Wed Sep 01 1999 - 15:28:22 EEST)
COMMON COURTISY Sales@MLF (Wed Sep 01 1999 - 15:47:14 EEST)
SPAM Coe Nigel EEV/Hebburn (Wed Sep 01 1999 - 16:16:12 EEST)
Possible SPAM solution. (Off topic) Dickinson, John (Wed Sep 01 1999 - 16:40:58 EEST)
Re: Possible SPAM solution. (Off topic) Stephen Rock (Wed Sep 01 1999 - 18:38:35 EEST)
(no subject) Rajesh Khurana (Wed Sep 01 1999 - 17:30:36 EEST)
Re: Fractional Ownership Charles Norton (Wed Sep 01 1999 - 17:34:33 EEST)
RE: Stereolithography Limitations Miller, Michael W (Wed Sep 01 1999 - 18:16:34 EEST)
COMMON COURTISY - Reply Tim Hossfeld (Wed Sep 01 1999 - 18:22:53 EEST)
RP Limitations Elaine Hunt (Wed Sep 01 1999 - 18:37:20 EEST)
Re: RP Limitations Paul Burr (Wed Sep 01 1999 - 20:26:19 EEST)
Re: Fractional Ownership Ronald Jones (Wed Sep 01 1999 - 20:47:16 EEST)
NOT RP. Only open if you are a Wiccan Mark Littlewood (Wed Sep 01 1999 - 19:08:38 EEST)
Painting Vendor (slightly off topic) Rick Harrington (Thu Sep 02 1999 - 00:03:43 EEST)
parts washer RJ Robinson (Thu Sep 02 1999 - 00:37:21 EEST)
Re: Job Posting aaroflex (Thu Sep 02 1999 - 01:34:59 EEST)
Iges, STL into Solid ??? Artur Mateus (Thu Sep 02 1999 - 01:41:20 EEST)
Re: Fw: Job Posting MAPrather7@aol.com (Thu Sep 02 1999 - 02:07:28 EEST)
(no subject) James Sanders (Thu Sep 02 1999 - 02:14:23 EEST)
Re: Job Posting Ronald Jones (Thu Sep 02 1999 - 02:15:57 EEST)
Re: RP Limitations ATiburon@aol.com (Thu Sep 02 1999 - 03:57:14 EEST)
Re: FW: Spam (rp-ml@ltk.hut.fi -mailing list) (fwd) Marshall Burns (Thu Sep 02 1999 - 04:00:09 EEST)
Re: FW: Spam (rp-ml@ltk.hut.fi -mailing list) (fwd) Scott A Taper (Thu Sep 02 1999 - 06:07:44 EEST)
Leave it to Albert to stir things up NoBounds@aol.com (Thu Sep 02 1999 - 07:05:19 EEST)
(no subject) Rapid Dude (Thu Sep 02 1999 - 08:01:39 EEST)
(no subject) Rapid Dude (Thu Sep 02 1999 - 08:03:49 EEST)
Draftangles on STL (again on request) Prototyping@ind.tno.nl (Thu Sep 02 1999 - 09:30:44 EEST)
COMMON COURTESY - Reply Derek.Harrell@dwtc.co.uk (Thu Sep 02 1999 - 12:52:22 EEST)
problem with quickcast models! Sergio Martins (Thu Sep 02 1999 - 16:35:59 EEST)
problem with quickcast models! Sergio Martins (Thu Sep 02 1999 - 17:15:47 EEST)
Re: RP Limitations aaroflex (Thu Sep 02 1999 - 19:24:03 EEST)
Re: Leave it to Albert to stir things up Ed Wilson (Thu Sep 02 1999 - 19:20:18 EEST)
2D TO 3D CONVERSION JOBS WORK CAPACITY AVAILABLE Ashish Masand (Thu Sep 02 1999 - 19:23:09 EEST)
Re: FW: Spam (rp-ml@ltk.hut.fi -mailing list) (fwd) Ronald Jones (Thu Sep 02 1999 - 20:49:21 EEST)
Info Inquiry on the ZCORP z402 3D Printer Grelewicz, David (Thu Sep 02 1999 - 21:29:55 EEST)
Re: Investment casting Tom Richards (Thu Sep 02 1999 - 17:45:46 EEST)
Re: FW: Spam (rp-ml@ltk.hut.fi -mailing list) (fwd) Tom Richards (Thu Sep 02 1999 - 18:07:58 EEST)
Re: Stereolithography Limitations Tom Richards (Thu Sep 02 1999 - 18:14:17 EEST)
RE: problem with quickcast models! Miller, Michael W (Thu Sep 02 1999 - 22:16:08 EEST)
Experi~encia Artur Mateus (Fri Sep 03 1999 - 01:57:18 EEST)
Re: Info Inquiry on the ZCORP z402 3D Printer Vern Carter (Fri Sep 03 1999 - 03:32:31 EEST)
Re: Info Inquiry on the ZCORP z402 3D Printer.....we even help our customer in Singapore!!! Innomation Systems & Technologies Pte. Ltd., (Fri Sep 03 1999 - 10:55:16 EEST)
rp materials and usage pete eros (Fri Sep 03 1999 - 06:24:53 EEST)
Re: 2D TO 3D CONVERSION JOBS WORK CAPACITY AVAILABLE Andy Cline (Fri Sep 03 1999 - 08:46:17 EEST)
Graphic Overview RPT Volker Pohlisch (Fri Sep 03 1999 - 11:16:01 EEST)
(no subject) Sergio Martins (Fri Sep 03 1999 - 11:21:30 EEST)
Re: Graphic Overview RPT dsuarez@cadtech.es (Fri Sep 03 1999 - 12:48:37 EEST)
10 messages David Retallick (Fri Sep 03 1999 - 14:28:37 EEST)
The History of RP! michael.priest@roverpte.demon.co.uk (Fri Sep 03 1999 - 14:42:15 EEST)
Fwd: The History of RP! Elaine Hunt (Fri Sep 03 1999 - 15:14:05 EEST)
Human Skull? Eric Weinberg (Fri Sep 03 1999 - 15:31:26 EEST)
Re: The History of RP! David Bourell (Fri Sep 03 1999 - 15:40:59 EEST)
Re:Info Inquiry on Z-Corp Z402 3D Printer Vdub1963@aol.com (Fri Sep 03 1999 - 15:58:59 EEST)
Re: Iges, STL into Solid ??? Bert van den Berg (Fri Sep 03 1999 - 16:10:57 EEST)
Antw: Human Skull? Volker Pohlisch (Fri Sep 03 1999 - 16:17:55 EEST)
Casting source for invar Alta Precision (Fri Sep 03 1999 - 16:20:39 EEST)
Re: 10 messages <

rp-ml-1999By Date

rp-ml-1999
By Date